Literature DB >> 23070661

The 2012 John Charnley Award: Clinical multicenter studies of the wear performance of highly crosslinked remelted polyethylene in THA.

Charles R Bragdon1, Michael Doerner, John Martell, Bryan Jarrett, Henrik Palm, Henrik Malchau.   

Abstract

BACKGROUND: Highly crosslinked polyethylene (HXLPE) in THA was developed to reduce particle-induced periprosthetic osteolysis. A series of clinical studies were initiated to determine the clinical efficacy as judged by patient-reported scores, radiographic osteolysis, and wear analysis of one form of HXLPE. QUESTIONS/PURPOSES: The purposes of this series of studies were to (1) determine the wear rates of one form of HXLPE; (2) report long-term (7-10 years) patient-reported outcome measures; (3) assess the effect of femoral head size on wear; and (4) determine the incidence of periprosthetic osteolysis.
METHODS: A single-center and two multicenter studies were conducted on 768 primary patients (head size 26-36 mm) undergoing THA at eight medical centers. Patient-reported outcome scores, radiographic grading for osteolysis, and radiographic wear evaluation were performed.
RESULTS: Serial plain radiographs showed no periprosthetic osteolysis in the three studies. The average femoral head penetration rates did not correlate with time in vivo for patients with standard femoral head sizes. Although there was an indication of higher wear in patients with 36-mm diameter femoral heads, it was below the threshold for producing osteolysis.
CONCLUSIONS: The introduction of this HXLPE substantially improved the prognosis of patients after THA up to 13 years as judged by clinical scores, incidence of osteolysis, and polyethylene wear measurements. LEVEL OF EVIDENCE: Level III, therapeutic study. See the Guideline for Authors for a complete description of levels of evidence.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23070661      PMCID: PMC3549171          DOI: 10.1007/s11999-012-2604-0

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.176


  51 in total

1.  Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip-simulator study.

Authors:  H McKellop; F W Shen; B Lu; P Campbell; R Salovey
Journal:  J Bone Joint Surg Am       Date:  2000-12       Impact factor: 5.284

2.  A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award.

Authors:  O K Muratoglu; C R Bragdon; D O O'Connor; M Jasty; W H Harris
Journal:  J Arthroplasty       Date:  2001-02       Impact factor: 4.757

3.  Larger diameter femoral heads used in conjunction with a highly cross-linked ultra-high molecular weight polyethylene: a new concept.

Authors:  O K Muratoglu; C R Bragdon; D O'Connor; R S Perinchief; D M Estok; M Jasty; W H Harris
Journal:  J Arthroplasty       Date:  2001-12       Impact factor: 4.757

4.  Comparison of wear, wear debris and functional biological activity of moderately crosslinked and non-crosslinked polyethylenes in hip prostheses.

Authors:  M Endo; J L Tipper; D C Barton; M H Stone; E Ingham; J Fisher
Journal:  Proc Inst Mech Eng H       Date:  2002       Impact factor: 1.617

5.  Femoral head sizes larger than 32 mm against highly cross-linked polyethylene.

Authors:  Brian R Burroughs; Harry E Rubash; William H Harris
Journal:  Clin Orthop Relat Res       Date:  2002-12       Impact factor: 4.176

6.  Third-body wear of highly cross-linked polyethylene in a hip simulator.

Authors:  Charles R Bragdon; Murali Jasty; Orhun K Muratoglu; Daniel O O'Connor; William H Harris
Journal:  J Arthroplasty       Date:  2003-08       Impact factor: 4.757

7.  Demographic biases found in scoring instruments of total hip arthroplasty.

Authors:  M R Brinker; P J Lund; D D Cox; R L Barrack
Journal:  J Arthroplasty       Date:  1996-10       Impact factor: 4.757

8.  Fixation, polyethylene wear, and pelvic osteolysis in primary total hip replacement.

Authors:  W J Maloney; J O Galante; M Anderson; V Goldberg; W H Harris; J Jacobs; M Kraay; P Lachiewicz; H E Rubash; S Schutzer; S T Woolson
Journal:  Clin Orthop Relat Res       Date:  1999-12       Impact factor: 4.176

9.  Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles.

Authors:  T R Green; J Fisher; J B Matthews; M H Stone; E Ingham
Journal:  J Biomed Mater Res       Date:  2000-09

10.  Evidence for the validity of a patient-based instrument for assessment of outcome after revision hip replacement.

Authors:  J Dawson; R Fitzpatrick; S Frost; R Gundle; P McLardy-Smith; D Murray
Journal:  J Bone Joint Surg Br       Date:  2001-11
View more
  29 in total

1.  Wear and Osteolysis of Highly Crosslinked Polyethylene at 10 to 14 Years: The Effect of Femoral Head Size.

Authors:  Paul F Lachiewicz; Elizabeth S Soileau; John M Martell
Journal:  Clin Orthop Relat Res       Date:  2016-02       Impact factor: 4.176

2.  Wear performance of cobalt chromium, ceramic, and oxidized zirconium on highly crosslinked polyethylene at mid-term follow-up.

Authors:  Matthew G Teeter; Colin J MacLean; Lyndsay E Somerville; James L Howard; Richard W McCalden; Brent A Lanting; Edward M Vasarhelyi
Journal:  J Orthop       Date:  2018-05-07

3.  Do oxidized zirconium femoral heads reduce polyethylene wear in cemented THAs? A blinded randomized clinical trial.

Authors:  Amine Zaoui; Samer El Hage; Jean Langlois; Caroline Scemama; Jean Pierre Courpied; Moussa Hamadouche
Journal:  Clin Orthop Relat Res       Date:  2015-12       Impact factor: 4.176

Review 4.  [Tribology in hip arthroplasty : Benefits of different materials].

Authors:  J Philippe Kretzer; Maximilian Uhler; Sebastian Jäger; Therese Bormann; Robert Sonntag; Mareike Schonhoff; Stefan Schröder
Journal:  Orthopade       Date:  2021-02-25       Impact factor: 1.087

5.  The John Charnley Award: Highly crosslinked polyethylene in total hip arthroplasty decreases long-term wear: a double-blind randomized trial.

Authors:  Siôn Glyn-Jones; Geraint E R Thomas; Patrick Garfjeld-Roberts; Roger Gundle; Adrian Taylor; Peter McLardy-Smith; David W Murray
Journal:  Clin Orthop Relat Res       Date:  2015-02       Impact factor: 4.176

6.  Highly crosslinked polyethylene improves wear but not surface damage in retrieved acetabular liners.

Authors:  Hee-Nee Pang; Douglas D R Naudie; Richard W McCalden; Steven J MacDonald; Matthew G Teeter
Journal:  Clin Orthop Relat Res       Date:  2015-02       Impact factor: 4.176

7.  Computational wear assessment of hard on hard hip implants subject to physically demanding tasks.

Authors:  R Nithyaprakash; S Shankar; M S Uddin
Journal:  Med Biol Eng Comput       Date:  2017-11-02       Impact factor: 2.602

8.  MRI of THA Correlates With Implant Wear and Tissue Reactions: A Cross-sectional Study.

Authors:  Matthew F Koff; Christina Esposito; Parina Shah; Mauro Miranda; Elexis Baral; Kara Fields; Thomas Bauer; Douglas E Padgett; Timothy Wright; Hollis G Potter
Journal:  Clin Orthop Relat Res       Date:  2019-01       Impact factor: 4.176

9.  Do Rerevision Rates Differ After First-time Revision of Primary THA With a Cemented and Cementless Femoral Component?

Authors:  Kirill Gromov; Alma B Pedersen; Søren Overgaard; Peter Gebuhr; Henrik Malchau; Anders Troelsen
Journal:  Clin Orthop Relat Res       Date:  2015-11       Impact factor: 4.176

10.  Is There a Benefit to Highly Crosslinked Polyethylene in Posterior-stabilized Total Knee Arthroplasty? A Randomized Trial.

Authors:  Paul F Lachiewicz; Elizabeth S Soileau
Journal:  Clin Orthop Relat Res       Date:  2016-01       Impact factor: 4.176

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.