| Literature DB >> 19789884 |
Christian Loewe1, Christoph R Becker, Riccardo Berletti, Carlo Alberto Cametti, Jerome Caudron, Walter Coudyzer, Johan De Mey, Massimo Favat, Jean-François Heautot, Sam Heye, Markus Hittinger, Antoine Larralde, Jean-Pierre Lestrat, Roberto Marangoni, Koenraad Nieboer, Peter Reimer, Martin Schwarz, Melanie Schernthaner, Johannes Lammer.
Abstract
PURPOSE: The purpose of this study was to assess the influence of iodine concentration on diagnostic efficacy in multi-detector-row computed tomography (MDCT) angiography of the abdominal aorta and abdominal arteries.Entities:
Mesh:
Substances:
Year: 2009 PMID: 19789884 PMCID: PMC2822224 DOI: 10.1007/s00330-009-1600-6
Source DB: PubMed Journal: Eur Radiol ISSN: 0938-7994 Impact factor: 5.315
Fig. 1a, bPrinciple of the measurement of arterial enhancement in the region of the suprarenal aorta, demonstrated in a patient examined with administration of 100 ml iobitridol because of infrarenal aortic aneurysm. Region of interest (ROI) is defined at the same table position in the baseline examination (a) as well as in the arterial phase images (b), as round surfaces in the lumen of the vessel, the circumference of which should not extend beyond the internal limit of the arterial wall
Demographic data of the study population
| Iobitridol 350 ( | Iomeprol 400 ( | All ( | ||||
|---|---|---|---|---|---|---|
| Sex | ||||||
| Male | 115 | (74.7%) | 132 | (84.6%) | 247 | (79.7%) |
| Female | 39 | (25.3%) | 24 | (15.4%) | 63 | (20.3%) |
| Age (years) | ||||||
|
| 154 | 156 | 310 | |||
| Mean (SD) | 65.2 | (10.9) | 67.8 | (9.8) | 66.5 | (10.4) |
| Median | 66.0 | 69.0 | 68.0 | |||
| Min/max | 30.0 | 90.0 | 35.0 | 86.0 | 30.0 | 90.0 |
| Height (cm) | ||||||
|
| 154 | 156 | 310 | |||
| Mean (SD) | 172.4 | (8.8) | 172.1 | (8.1) | 172.2 | (8.5) |
| Median | 172.5 | 172.0 | 172.0 | |||
| Min/max | 150 | 196 | 152 | 193 | 150 | 196 |
| Weight (kg) | ||||||
|
| 154 | 156 | 310 | |||
| Mean (SD) | 78.5 | (16.1) | 79.4 | (15.7) | 78.9 | (15.9) |
| Median | 79.0 | 78.5 | 79.0 | |||
| Min/max | 44.0 | 122.0 | 41.0 | 130.0 | 41.0 | 130.0 |
| Body mass index (kg/m2) | ||||||
|
| 154 | 156 | 310 | |||
| Mean (SD) | 26.3 | (4.3) | 26.7 | (4.5) | 26.5 | (4.4) |
| Median | 26.4 | 26.0 | 26.1 | |||
| Min/max | 17.6 | 39.4 | 16.7 | 40.5 | 16.7 | 40.5 |
Injection protocols by centre and overall
| Centre ( | Volume (ml) | Iodine (g) | Flow rate (ml/s) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Mean | Min | Max | Mean | Min | Max | Mean | Min | Max | |
| Centre 1 | |||||||||
| Total (39) | 100 | 100 | 100 | 37.4 | 35 | 40 | 5.0 | 4.0 | 5.0 |
| Iobitridol (20) | 100 | 100 | 100 | 35 | 35 | 35 | 5.0 | 4.0 | 5.0 |
| Iomeprol (19) | 100 | 100 | 100 | 40 | 40 | 40 | 5.0 | 5.0 | 5.0 |
| Centre 2 | |||||||||
| Total (40) | 120 | 120 | 120 | 45 | 42 | 48 | 3.0 | 3.0 | 3.0 |
| Iobitridol (20) | 120 | 120 | 120 | 42 | 42 | 42 | 3.0 | 3.0 | 3.0 |
| Iomeprol (20) | 120 | 120 | 120 | 48 | 48 | 48 | 3.0 | 3.0 | 3.0 |
| Centre 4 | |||||||||
| Total (35) | 90 | 90 | 90 | 33.8 | 31.5 | 36 | 3.5 | 3.5 | 3.5 |
| Iobitridol (17) | 90 | 90 | 90 | 31.5 | 31.5 | 31.5 | 3.5 | 3.5 | 3.5 |
| Iomeprol (18) | 90 | 90 | 90 | 36 | 36 | 36 | 3.5 | 3.5 | 3.5 |
| Centre 7 | |||||||||
| Total (35) | 100 | 100 | 100 | 37.6 | 35 | 40 | 3.0 | 3.0 | 3.0 |
| Iobitridol (17) | 100 | 100 | 100 | 35 | 35 | 35 | 3.0 | 3.0 | 3.0 |
| Iomeprol (18) | 100 | 100 | 100 | 40 | 40 | 40 | 3.0 | 3.0 | 3.0 |
| Centre 3 | |||||||||
| Total (38) | 89.7 | 80 | 140 | 33.7 | 28 | 56 | 4.8 | 2.5 | 5.3 |
| Iobitridol (19) | 88.9 | 80 | 90 | 31.1 | 28 | 31.5 | 4.9 | 4.0 | 5.2 |
| Iomeprol (19) | 90.5 | 80 | 140 | 36.2 | 32 | 56 | 4.6 | 2.5 | 5.3 |
| Centre 5 | |||||||||
| Total (27) | 117.8 | 100 | 120 | 44.1 | 35 | 48 | 4.0 | 4.0 | 4.0 |
| Iobitridol (14) | 117.1 | 100 | 120 | 41 | 35 | 42 | 4.0 | 4.0 | 4.0 |
| Iomeprol (13) | 118.5 | 100 | 120 | 47.4 | 40 | 48 | 4.0 | 4.0 | 4.0 |
| Centre 6 | |||||||||
| Total (30) | 115.4 | 63 | 120 | 43.4 | 25.2 | 48 | 5.0 | 5.0 | 5.0 |
| Iobitridol (14) | 117.1 | 100 | 120 | 41 | 35 | 42 | 5.0 | 5.0 | 5.0 |
| Iomeprol (16) | 113.9 | 63 | 120 | 45.6 | 25.2 | 48 | 5.0 | 5.0 | 5.0 |
| Centre 8 | |||||||||
| Total (26) | 110.4 | 74 | 135 | 41.4 | 28 | 51.2 | 5.5 | 4.5 | 6.0 |
| Iobitridol (13) | 110.8 | 80 | 135 | 38.8 | 28 | 47.3 | 5.4 | 4.5 | 6.0 |
| Iomeprol (13) | 109.9 | 74 | 128 | 44 | 29.6 | 51.2 | 5.5 | 5.0 | 6.0 |
| Centre 9 | |||||||||
| Total (39) | 77.4 | 70 | 140 | 29 | 24.5 | 56 | 4.0 | 4.0 | 4.2 |
| Iobitridol (20) | 76 | 70 | 140 | 26.6 | 24.5 | 49 | 4.0 | 4.0 | 4.2 |
| Iomeprol (19) | 78.9 | 70 | 140 | 31.6 | 28 | 56 | 4.0 | 4.0 | 4.0 |
| Total | |||||||||
| Total (309) | 101.3 | 63 | 140 | 38 | 24.5 | 56 | 4.1 | 2.5 | 6.0 |
| Iobitridol (154) | 101 | 70 | 140 | 35.4 | 24.5 | 49 | 4.2 | 3.0 | 6.0 |
| Iomeprol (155) | 101.5 | 63 | 140 | 40.6 | 25.2 | 56 | 4.1 | 2.5 | 6.0 |
Centres 1, 2, 4 and 7: constant volumes regardless of patients’ weight, conditions or indication of examination
Centres 3, 5, 6, 8 and 9: volumes adjusted based on patients’ weight, conditions or indication of examination
Diagnostic efficacy according to patients
| Injected product | All | Statistical test | |||||
|---|---|---|---|---|---|---|---|
| Iobitridol 350 ( | Iomeprol 400 ( | ( | |||||
|
| % |
| % |
| % | ||
| MDCT diagnostic efficacy | |||||||
| Not satisfactory/not providing enough information | 0 | 0.0% | 1 | 0.6% | 1 | 0.3% | |
| Not satisfactory/not providing all expected information | 1 | 0.7% | 0 | 0.0% | 1 | 0.3% | |
| Satisfactory/providing sufficient information | 3 | 2.0% | 2 | 1.3% | 5 | 1.6% | |
| Totally satisfactory/providing expected information | 149 | 97.4% | 151 | 98.1% | 300 | 97.7% | |
| MDCT diagnostic efficacy, primary endpoint | |||||||
| Not satisfactory | 1 | 0.7% | 1 | 0.6% | 2 | 0.7% | Asympt. 95% CI: [−1.8%; 1.8%] |
| Totally satisfactory/satisfactory | 152 | 99.3% | 153 | 99.4% | 305 | 99.3% | Exact 95% CI: [−2.98%; 3.01%], |
| MDCT diagnostic efficacy, totally satisfactory | |||||||
| Not totally satisfactory | 4 | 2.6% | 3 | 1.9% | 7 | 2.3% | Asympt. 95% CI: [−4.01%; 2.67%] |
| Totally satisfactory | 149 | 97.4% | 151 | 98.1% | 300 | 97.7% | Exact 95% CI: [−4.82%; 3.23%], |
Generalised linear model: y = intercept + product
aExact statistical P value for main effect (difference between products ≠ 10%)
Image quality assessments in vessel segments
| Injected product | All | Statistical test | |||||
|---|---|---|---|---|---|---|---|
| Iobitridol 350 ( | Iomeprol 400 ( | ( | |||||
|
| % |
| % |
| % | ||
| Image quality in vessels | |||||||
| – | 1 | 0 | 1 | ||||
| NA (out of the FOV) | 32 | 1.3% | 50 | 2.0% | 82 | 1.7% | |
| Null | 64 | 2.6% | 52 | 2.1% | 116 | 2.4% | |
| Poor | 32 | 1.3% | 26 | 1.1% | 58 | 1.2% | |
| Good | 168 | 6.9% | 146 | 5.9% | 314 | 6.4% | |
| Excellent | 2,151 | 87.9% | 2,190 | 88.9% | 4,341 | 88.4% | |
| Image quality in vessels, good/excellent | |||||||
| –/NA | 33 | 50 | 83 | Asympt. 95% CI: [−3.30%; 1.84%] | |||
| Null/poor | 96 | 3.9% | 78 | 3.2% | 174 | 3.5% |
|
| Good/excellent | 2,319 | 94.7% | 2,336 | 94.8% | 4,655 | 94.8% |
|
| Image quality in vessels, score | |||||||
| Vessel segments ( | 2,415 | 2,414 | 4,829 | ||||
| Mean (SD) | 2.824 (0.57) | 2.853 (0.53) | 2.839 (0.55) | Asympt. 95% CI: [−0.109; 0.051] | |||
| Median | 3.0 | 3.0 | 3.0 |
| |||
| Min/max | 0/3 | 0/3 | 0/3 |
| |||
Generalised linear model: y = intercept + product + segment + product × segment (clustered within subjects)
aWald stat. P value for main effect (difference between products ≠ 0)
bWald stat. P value for interaction (difference between products changes with segments)
Fig. 2Two examples of abdominal aortic angiograms (maximum intensity projections, MIP) obtained during the administration of two contrast agents. The patient in a was examined during administration of 100 ml iobitridol 350 mgI/ml, and the patient in b received 100 ml iomeprol 400 mgI/ml. Regardless of the different total amounts of iodine, both MIPs show excellent and homogeneous arterial enhancement without visualised differences
Image quality assessments in vascular wall segments
| Injected product | All | Statistical test | |||||
|---|---|---|---|---|---|---|---|
| Iobitridol 350 ( | Iomeprol 400 ( | ( | |||||
|
| % |
| % |
| % | ||
| Image quality in vascular walls | |||||||
| – | 2 | 0 | 2 | ||||
| NA (out of the FOV) | 32 | 1.3% | 50 | 2.0% | 82 | 1.7% | |
| Null | 77 | 3.1% | 65 | 2.6% | 142 | 2.9% | |
| Poor | 273 | 11.2% | 300 | 12.2% | 573 | 11.7% | |
| Good | 222 | 9.1% | 282 | 11.4% | 504 | 10.3% | |
| Excellent | 1842 | 75.2% | 1767 | 71.7% | 3609 | 73.5% | |
| Image quality in vascular walls, good/excellent | |||||||
| –/ NA | 34 | 50 | 84 | Asympt. 95% CI: [−6.33%, 7.87%] | |||
| Null/poor | 350 | 14.3% | 365 | 14.8% | 715 | 14.6% |
|
| Good/excellent | 2,064 | 84.3% | 2,049 | 83.2% | 4,113 | 83.7% |
|
| Image quality in vascular walls, score | |||||||
| Vascular wall segments ( | 2,414 | 2,414 | 4,828 | Asympt. 95% CI: [−0.118; 0.181] | |||
| Mean (SD) | 2.586 (0.81) | 2.554 (0.81) | 2.570 (0.81) | ||||
| Median | 3.0 | 3.0 | 3.0 |
| |||
| Min/max | 0/3 | 0/3 | 0/3 |
| |||
Generalised linear model: y = intercept + product + segment + product × segment (clustered within subjects)
aWald stat. P value for main effect (difference between products ≠ 0)
bWald stat. P value for interaction (difference between products changes with segments)
Quantification of MDCT enhancement, attenuation variation
| Injected product | All | Statistical tests | ||
|---|---|---|---|---|
| Iobitridol 350 ( | Iomeprol 400 ( | ( | ||
| Baseline attenuation (HU) | ||||
|
| 1,162 | 1,153 | 2,315 | |
| Mean (SD) | 40.0 (12.14) | 40.8 (12.49) | 40.4 (12.32) | |
| Median | 40.0 | 41.0 | 41.0 | |
| Min/max | 3/90 | 3/94 | 3/94 | |
| Post-contrast attenuation (HU) | ||||
|
| 1,196 | 1,197 | 2,393 | |
| Mean (SD) | 320.4 (93.54) | 353.6 (95.45) | 337.0 (95.93) | |
| Median | 306.0 | 349.0 | 327.0 | |
| Min/max | 42/638 | 25/770 | 25/770 | |
| Attenuation absolute variations from baseline (HU) | ||||
|
| 1,160 | 1,152 | 2,312 | |
| Mean (SD) | 282.3 (93.59) | 314.0 (96.20) | 298.0 (96.19) | Asympt. 95% CI: [−53.47; −12.85] |
| Median | 271.0 | 309.0 | 289.0 |
|
| Min/max | −4/588 | −12/745 | −12/745 |
|
| Attenuation relative variations from baseline | ||||
|
| 1160 | 1152 | 2312 | |
| Mean (SD) | 8.123 (5.9357) | 8.863 (5.4576) | 8.492 (5.7132) | Asympt. 95% CI: [−1.53; 0.053] |
| Median | 7.043 | 7.817 | 7.403 |
|
| Min/max | −0.06/129.00 | −0.26/65.83 | −0.26/129.00 |
|
n Number of vessel segments
Generalised linear model: y = intercept + product + segment + product × segment (clustered within subjects)
aWald stat. P value for main effect (difference between products ≠ 0)
bWald stat. P value for interaction (difference between products changes with segments)