Parameters affecting retentive force of electroformed double-crown systems.

The aim of this study was to determine the values of retentive forces of double crowns. The effect of the abutment height, the material of the inner crown, and the taper were evaluated. Sixty inner crowns each were fabricated from zirconia and a gold alloy having three different abutment heights (5, 7, and 9 mm) and two different tapers (0 degrees and 2 degrees ). All outer crowns were made with an electroforming system. The removal test was performed by a standardized setup using a universal testing machine at a crosshead speed of 1,000 mm min(-1). Ten separation cycles were performed of each specimen, and the mean was imported into a statistical program. The retention forces were in the range of 0.37 and 2.65 N. The abutment height (p < 0.001), the material of the inner crown (p = 0.035), and the taper (p < 0.001) showed statistical influence on the retention force in the two-way ANOVA. Zirconia primary crowns performed better than gold alloy in the 0 degrees group, especially with short abutments. However, a taper of 0 degrees and short abutments have clinical drawbacks that were not evaluated in this study. In situations with long abutment teeth and a 2 degrees taper zirconia is an alternative to gold alloy primary crowns.