| Literature DB >> 30274477 |
Kosala G Weerakoon1,2,3, Catherine A Gordon4, Donald P McManus5.
Abstract
Despite extensive efforts over the last few decades, the global disease burden of schistosomiasis still remains unacceptably high. This could partly be attributed to the lack of accurate diagnostic tools for detecting human and animal schistosome infections in endemic areas. In low transmission and low prevalence areas where schistosomiasis elimination is targeted, case detection requires a test that is highly sensitive. Diagnostic tests with low sensitivity will miss individuals with low infection intensity and these will continue to contribute to transmission, thereby interfering with the efficacy of the control measures operating. Of the many diagnostic approaches undertaken to date, the detection of schistosome DNA using DNA amplification techniques including polymerase chain reaction (PCR) provide valuable adjuncts to more conventional microscopic and serological methods, due their accuracy, high sensitivity, and the capacity to detect early pre-patent infections. Furthermore, DNA-based methods represent important screening tools, particularly in those endemic areas with ongoing control where infection prevalence and intensity have been reduced to very low levels. Here we review the role of DNA diagnostics in the path towards the control and elimination of schistosomiasis.Entities:
Keywords: DNA; control and elimination; diagnosis; polymerase chain reaction; schistosomiasis
Year: 2018 PMID: 30274477 PMCID: PMC6160968 DOI: 10.3390/tropicalmed3030081
Source DB: PubMed Journal: Trop Med Infect Dis ISSN: 2414-6366
Figure 1Applicability of diagnostic tools for the detection of different lifecycle stages of schistosomes.
Advantages and limitations of different DNA diagnostics.
| Assay Type | Advantages | Limitations | Relative Cost * | References |
|---|---|---|---|---|
| cPCR |
Low cost compared to qPCR and ddPCR Can be multiplexed when target amplicon sizes are different |
Requires post PCR processing—running PCR products in a gel—which allows high chance of contamination More time consuming and labor intensive compared to most other PCR methods Prone to potential laboratory contamination with the need of manual handling of PCR products | $$ | [ |
| nPCR |
Use of two sets of primers improves the specificity while the need of two rounds of cPCR provide a higher sensitivity |
Relatively time consuming and complicated initial optimization process Need to complete two rounds of cPCR amplifications, hence more time consuming and labor intensive Prone to contamination with amplified PCR products | $$ | [ |
| qPCR |
Higher sensitivity compared to cPCR Higher specificity, specifically when probes are used No post PCR processing (such as running a gel in cPCR) required for final results No manual handling of PCR products which limits the potential laboratory contamination Can quantify the amount of amplicons (relative quantification) Can be multiplexed for the detection of multiple species within a single reaction Less time consuming and less labor intensive compared to cPCR |
Relatively time consuming and complicated initial optimization process in multiplexed assays Requires triplicate reactions to improve the accuracy of final calculations More expensive than cPCR, LAMP, direct PCR | $$$ | [ |
| LAMP |
Cost effective Less equipment required Can visualize the end products directly without running in a gel Faster procedures compared to other types of PCR |
Relatively time consuming and complicated initial optimization process Prone to carryover contamination | $ | [ |
| RPA |
Cost effective Less equipment required End products can be visualized on a chip/lateral flow device Has a great potential to be developed as a point of care diagnostic tool |
Relatively time consuming and complicated initial optimization process Prone to contamination with the need of transferring amplified products to a detection device | $ | [ |
| ddPCR |
Higher sensitivity compared to most other types of PCR Higher specificity, specifically when probes are used Can quantify the amount of amplicons (absolute quantification) No manual handling of PCR products which limits the potential laboratory contamination Can be multiplexed for the detection of multiple species within a single reaction |
Requires specific and expensive machinery for the initial establishment Relatively time consuming and complicated initial optimization process in multiplexed assays | $$$ | [ |
| Direct PCR |
Raw sample is used as the template for PCR amplification, eliminating the need of a DNA extraction step Less time consuming and convenient |
Initial development and optimization is relatively complicated and time consuming, as it is required to overcome PCR inhibitors in raw samples. | $ | [ |
* The cost of diagnostics is given as a relative scale to each other: $—low, $$—moderate, $$$—high. The individual cost of DNA diagnostics can be variable depending on factors such as the type and brand of commercial reagents used and the regional source where these reagents are purchased. Abbreviations: cPCR: conventional PCR, ddPCR: droplet digital PCR, LAMP: Loop mediated isothermal amplification, nPCR: nested PCR, RPA: Recombinase polymerase amplification.