Literature DB >> 23677352

Adverse local tissue reaction arising from corrosion at the femoral neck-body junction in a dual-taper stem with a cobalt-chromium modular neck.

H John Cooper1, Robert M Urban, Richard L Wixson, R Michael Meneghini, Joshua J Jacobs.   

Abstract

BACKGROUND: Femoral stems with dual-taper modularity were introduced to allow additional options for hip-center restoration independent of femoral fixation in total hip arthroplasty. Despite the increasing availability and use of these femoral stems, concerns exist about potential complications arising from the modular neck-body junction.
METHODS: This was a multicenter retrospective case series of twelve hips (eleven patients) with adverse local tissue reactions secondary to corrosion at the modular neck-body junction. The cohort included eight women and three men who together had an average age of 60.1 years (range, forty-three to seventy-seven years); all hips were implanted with a titanium-alloy stem and cobalt-chromium-alloy neck. Patients presented with new-onset and increasing pain at a mean of 7.9 months (range, five to thirteen months) following total hip arthroplasty. After serum metal-ion studies and metal artifact reduction sequence (MARS) magnetic resonance imaging (MRI) revealed abnormal results, the patients underwent hip revision at a mean of 15.2 months (range, ten to twenty-three months). Tissue specimens were examined by a single histopathologist, and the retrieved implants were studied with use of light and scanning electron microscopy.
RESULTS: Serum metal levels demonstrated greater elevation of cobalt (mean, 6.0 ng/mL) than chromium (mean, 0.6 ng/mL) or titanium (mean, 3.4 ng/mL). MRI with use of MARS demonstrated adverse tissue reactions in eight of nine patients in which it was performed. All hips showed large soft-tissue masses and surrounding tissue damage with visible corrosion at the modular femoral neck-body junction. Available histology demonstrated large areas of tissue necrosis in seven of ten cases, while remaining viable capsular tissue showed a dense lymphocytic infiltrate. Microscopic analysis was consistent with fretting and crevice corrosion at the modular neck-body interface.
CONCLUSIONS: Corrosion at the modular neck-body junction in dual-tapered stems with a modular cobalt-chromium-alloy femoral neck can lead to release of metal ions and debris resulting in local soft-tissue destruction. Adverse local tissue reaction should be considered as a potential cause for new-onset pain in patients with these components, and early revision should be considered given the potentially destructive nature of these reactions. A workup including serologic studies (erythrocyte sedimentation rate and C-reactive protein), serum metal levels, and MARS MRI can be helpful in establishing this diagnosis.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23677352      PMCID: PMC3748981          DOI: 10.2106/JBJS.L.01042

Source DB:  PubMed          Journal:  J Bone Joint Surg Am        ISSN: 0021-9355            Impact factor:   5.284


  53 in total

1.  Corrosion-induced fracture of a double-modular hip prosthesis: a case report.

Authors:  Sara A Atwood; Eli W Patten; Kevin J Bozic; Lisa A Pruitt; Michael D Ries
Journal:  J Bone Joint Surg Am       Date:  2010-06       Impact factor: 5.284

2.  A comparison of two implant systems in restoration of hip geometry in arthroplasty.

Authors:  Michael J Archibeck; Tamara Cummins; Joshua Carothers; Daniel W Junick; Richard E White
Journal:  Clin Orthop Relat Res       Date:  2011-02       Impact factor: 4.176

3.  Failure of the modular neck in a total hip arthroplasty.

Authors:  Chris J Dangles; Carl J Altstetter
Journal:  J Arthroplasty       Date:  2009-10-17       Impact factor: 4.757

4.  Influence of material coupling and assembly condition on the magnitude of micromotion at the stem-neck interface of a modular hip endoprosthesis.

Authors:  S Y Jauch; G Huber; E Hoenig; M Baxmann; T M Grupp; M M Morlock
Journal:  J Biomech       Date:  2011-04-30       Impact factor: 2.712

5.  High failure rates with a large-diameter hybrid metal-on-metal total hip replacement: clinical, radiological and retrieval analysis.

Authors:  B J R F Bolland; D J Culliford; D J Langton; J P S Millington; N K Arden; J M Latham
Journal:  J Bone Joint Surg Br       Date:  2011-05

6.  Clinical results of a modular neck hip system: hitting the "bull's-eye" more accurately.

Authors:  Paul J Duwelius; Mark A Hartzband; Robert Burkhart; Clay Carnahan; Scott Blair; YingXing Wu; Gary L Grunkemeier
Journal:  Am J Orthop (Belle Mead NJ)       Date:  2010-10

7.  Total hip arthroplasty modular neck failure.

Authors:  Jack G Skendzel; J David Blaha; Andrew G Urquhart
Journal:  J Arthroplasty       Date:  2010-04-09       Impact factor: 4.757

8.  Accelerating failure rate of the ASR total hip replacement.

Authors:  D J Langton; S S Jameson; T J Joyce; J N Gandhi; R Sidaginamale; P Mereddy; J Lord; A V F Nargol
Journal:  J Bone Joint Surg Br       Date:  2011-08

9.  Adverse reaction to metal release from a modular metal-on-polyethylene hip prosthesis.

Authors:  J U Lindgren; B H Brismar; A C Wikstrom
Journal:  J Bone Joint Surg Br       Date:  2011-10

10.  Histological features of pseudotumor-like tissues from metal-on-metal hips.

Authors:  Pat Campbell; Edward Ebramzadeh; Scott Nelson; Karren Takamura; Koen De Smet; Harlan C Amstutz
Journal:  Clin Orthop Relat Res       Date:  2010-09       Impact factor: 4.176

View more
  79 in total

1.  Revision for taper corrosion at the neck-body junction following total hip arthroplasty: pearls and pitfalls.

Authors:  Mitchell C Weiser; Darwin D Chen
Journal:  Curr Rev Musculoskelet Med       Date:  2016-03

2.  Cementless modular neck stems: are they a safe option in primary total hip arthroplasty?

Authors:  José M Pelayo-de-Tomás; José L Rodrigo-Pérez; Carlos D Novoa-Parra; Alejandro Lizaur-Utrilla; María Morales-Suárez-Varela; José Antonio Blas-Dobón
Journal:  Eur J Orthop Surg Traumatol       Date:  2017-10-29

Review 3.  What Factors Drive Taper Corrosion?

Authors:  Robin Pourzal; Hannah J Lundberg; Deborah J Hall; Joshua J Jacobs
Journal:  J Arthroplasty       Date:  2018-03-30       Impact factor: 4.757

4.  Modelling changes in modular taper micromechanics due to surgeon assembly technique in total hip arthroplasty.

Authors:  Jonathan A Gustafson; Robin Pourzal; Brett R Levine; Joshua J Jacobs; Hannah J Lundberg
Journal:  Bone Joint J       Date:  2020-07       Impact factor: 5.082

5.  A New Case of Fracture of a Modular Femoral Neck Device After a Total Hip Arthroplasty.

Authors:  Klemens Trieb; Nicola Stadler
Journal:  Open Orthop J       Date:  2015-05-15

6.  CORR Insights®: Exchangeable Femoral Neck (Dual-Modular) THA Prostheses Have Poorer Survivorship than Other Designs: A Nationwide Cohort of 324,108 Patients.

Authors:  H John Cooper
Journal:  Clin Orthop Relat Res       Date:  2017-02-24       Impact factor: 4.176

7.  In-situ Generated Tribomaterial in Metal/Metal Contacts: current understanding and future implications for implants.

Authors:  N Espallargas; A Fischer; A Igual Muñoz; S Mischler; M A Wimmer
Journal:  Biotribology (Oxf)       Date:  2017-05-12

Review 8.  What Surgeons Need to Know About Adverse Local Tissue Reaction in Total Hip Arthroplasty.

Authors:  Deborah J Hall; Robin Pourzal; Joshua J Jacobs
Journal:  J Arthroplasty       Date:  2020-01-15       Impact factor: 4.757

9.  Potentiodynamic Corrosion Testing.

Authors:  Selin Munir; Matthew H Pelletier; William R Walsh
Journal:  J Vis Exp       Date:  2016-09-04       Impact factor: 1.355

10.  Mechanical, chemical and biological damage modes within head-neck tapers of CoCrMo and Ti6Al4V contemporary hip replacements.

Authors:  Deborah J Hall; Robin Pourzal; Hannah J Lundberg; Mathew T Mathew; Joshua J Jacobs; Robert M Urban
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2017-08-26       Impact factor: 3.368

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.