Feng Qiu1, Xiao-Bao Zou2, Xi-Lin Xu1, Wei-Cheng Jiang1, Geng-Chao Liu1, Xiang-Yang Ma3. 1. Department of Orthopaedic, Puning Overseas Chinese Hospital, 515300, Puning, Jieyang, Guangdong, People's Republic of China. 2. The First School of Clinical Medicine, Southern Medical University, No.1838 North of Guangzhou Road, 510515, Guangzhou, People's Republic of China. 3. Department of Orthopedics, General Hospital of Southern Theatre Command of PLA, 111 Liuhua Road, 510010, Guangzhou, People's Republic of China. maxy1001@126.com.
Abstract
BACKGROUND: Posterior atlantoaxial fixation with screw rod forms an approximate "II" shape or "H" increasing transverse link for better stability. In order to improve stability and in consideration of difficult placement of transverse connecting rod, possibility of inadequate bone graft, some scholars have preliminarily researched biomechanics of a novel crossed rod as an approximate "X" configuration of screw rod. PURPOSE: The aim of this study was to evaluate and compare the biomechanics of the crossed and parallel rod configurations in the screw rod system for posterior atlantoaxial fixation on a cadaveric model. METHODS: Six fresh cervical specimens were used to complete the range of motion (ROM) testing by applying pure moments of ± 2.0 nm. Following intact state and under destabilization testing, screws were implanted. The specimens were then tested in the following sequence: Group BLS + PR (C2 bilateral laminar screws + parallel rod), Group BLS + CR (C2 bilateral laminar screws + crossed rod), LPRLS + PR (C2 left pedicle screw and right laminar screw + parallel rod), LPRLS + CR (C2 left pedicle screw and right laminar screw + crossed rod), BPS + PR (C2 bilateral pedicle screws + parallel rod) and BPS + CR (C2 bilateral pedicle screws + crossed rod). The ROM of the C1-2 segments was measured in flexion-extension, lateral bending and axial rotation. Six surgical constructs were compared between the groups and with intact condition, respectively. RESULTS: The six fixed modes significantly increased stability compared with both the intact and destabilization group in flexion-extension, lateral bending and axial rotation (p < .05). In extension, BPS + CR and BLS + CR showed greater stability than BLS + PR (p < .05). During flexion, the six fixation methods showed no statistical significance (p > .05). In left lateral bending, stability of the other five screw rod fixation techniques significantly increased when compared with BLS + PR (p < .05). In the right lateral bending direction, the stability of BLS + PR was worse than that of BPS + CR and BPS + PR (p < .05). In the left axial rotation, stability of BLS + CR, LPRLS + CR and BPS + CR was greater than that of BLS + PR, LPRLS + PR and BPS + PR (p < .05). In the right axial rotation, the stability of BPS + CR and BLS + CR was greater than that of BLS + PR (p < .05). CONCLUSION: The six investigated fixation methods provide sufficient biomechanical stability. The crossed rod configuration can further enhance the axial rotation stability of the screw rod system, which consists of C1 bilateral pedicle and C2 pedicle, or C2 lamina screws. The crossed rod can also improve the stability of the screw rod system made up of C1 bilateral pedicle and C2 lamina screws in lateral bending and extension. The crossed rod configuration is reliable and provides superior stability for clinical application.
BACKGROUND: Posterior atlantoaxial fixation with screw rod forms an approximate "II" shape or "H" increasing transverse link for better stability. In order to improve stability and in consideration of difficult placement of transverse connecting rod, possibility of inadequate bone graft, some scholars have preliminarily researched biomechanics of a novel crossed rod as an approximate "X" configuration of screw rod. PURPOSE: The aim of this study was to evaluate and compare the biomechanics of the crossed and parallel rod configurations in the screw rod system for posterior atlantoaxial fixation on a cadaveric model. METHODS: Six fresh cervical specimens were used to complete the range of motion (ROM) testing by applying pure moments of ± 2.0 nm. Following intact state and under destabilization testing, screws were implanted. The specimens were then tested in the following sequence: Group BLS + PR (C2 bilateral laminar screws + parallel rod), Group BLS + CR (C2 bilateral laminar screws + crossed rod), LPRLS + PR (C2 left pedicle screw and right laminar screw + parallel rod), LPRLS + CR (C2 left pedicle screw and right laminar screw + crossed rod), BPS + PR (C2 bilateral pedicle screws + parallel rod) and BPS + CR (C2 bilateral pedicle screws + crossed rod). The ROM of the C1-2 segments was measured in flexion-extension, lateral bending and axial rotation. Six surgical constructs were compared between the groups and with intact condition, respectively. RESULTS: The six fixed modes significantly increased stability compared with both the intact and destabilization group in flexion-extension, lateral bending and axial rotation (p < .05). In extension, BPS + CR and BLS + CR showed greater stability than BLS + PR (p < .05). During flexion, the six fixation methods showed no statistical significance (p > .05). In left lateral bending, stability of the other five screw rod fixation techniques significantly increased when compared with BLS + PR (p < .05). In the right lateral bending direction, the stability of BLS + PR was worse than that of BPS + CR and BPS + PR (p < .05). In the left axial rotation, stability of BLS + CR, LPRLS + CR and BPS + CR was greater than that of BLS + PR, LPRLS + PR and BPS + PR (p < .05). In the right axial rotation, the stability of BPS + CR and BLS + CR was greater than that of BLS + PR (p < .05). CONCLUSION: The six investigated fixation methods provide sufficient biomechanical stability. The crossed rod configuration can further enhance the axial rotation stability of the screw rod system, which consists of C1 bilateral pedicle and C2 pedicle, or C2 lamina screws. The crossed rod can also improve the stability of the screw rod system made up of C1 bilateral pedicle and C2 lamina screws in lateral bending and extension. The crossed rod configuration is reliable and provides superior stability for clinical application.
Entities:
Keywords:
Biomechanics; Parallel rod; Posterior atlantoaxial fixation; Screw rod system crossed rod