Literature DB >> 25611041

High-fidelity artifact correction for cone-beam CT imaging of the brain.

A Sisniega1, W Zbijewski, J Xu, H Dang, J W Stayman, J Yorkston, N Aygun, V Koliatsos, J H Siewerdsen.   

Abstract

CT is the frontline imaging modality for diagnosis of acute traumatic brain injury (TBI), involving the detection of fresh blood in the brain (contrast of 30-50 HU, detail size down to 1 mm) in a non-contrast-enhanced exam. A dedicated point-of-care imaging system based on cone-beam CT (CBCT) could benefit early detection of TBI and improve direction to appropriate therapy. However, flat-panel detector (FPD) CBCT is challenged by artifacts that degrade contrast resolution and limit application in soft-tissue imaging. We present and evaluate a fairly comprehensive framework for artifact correction to enable soft-tissue brain imaging with FPD CBCT. The framework includes a fast Monte Carlo (MC)-based scatter estimation method complemented by corrections for detector lag, veiling glare, and beam hardening.The fast MC scatter estimation combines GPU acceleration, variance reduction, and simulation with a low number of photon histories and reduced number of projection angles (sparse MC) augmented by kernel de-noising to yield a runtime of ~4 min per scan. Scatter correction is combined with two-pass beam hardening correction. Detector lag correction is based on temporal deconvolution of the measured lag response function. The effects of detector veiling glare are reduced by deconvolution of the glare response function representing the long range tails of the detector point-spread function. The performance of the correction framework is quantified in experiments using a realistic head phantom on a testbench for FPD CBCT.Uncorrected reconstructions were non-diagnostic for soft-tissue imaging tasks in the brain. After processing with the artifact correction framework, image uniformity was substantially improved, and artifacts were reduced to a level that enabled visualization of ~3 mm simulated bleeds throughout the brain. Non-uniformity (cupping) was reduced by a factor of 5, and contrast of simulated bleeds was improved from ~7 to 49.7 HU, in good agreement with the nominal blood contrast of 50 HU. Although noise was amplified by the corrections, the contrast-to-noise ratio (CNR) of simulated bleeds was improved by nearly a factor of 3.5 (CNR = 0.54 without corrections and 1.91 after correction). The resulting image quality motivates further development and translation of the FPD-CBCT system for imaging of acute TBI.

Entities:  

Mesh:

Year:  2015        PMID: 25611041     DOI: 10.1088/0031-9155/60/4/1415

Source DB:  PubMed          Journal:  Phys Med Biol        ISSN: 0031-9155            Impact factor:   3.609


  20 in total

1.  High-Fidelity Modeling of Detector Lag and Gantry Motion in CT Reconstruction.

Authors:  Steven Tilley; Alejandro Sisniega; Jeffrey H Siewerdsen; J Webster Stayman
Journal:  Conf Proc Int Conf Image Form Xray Comput Tomogr       Date:  2018-05

2.  Motion compensation in extremity cone-beam computed tomography.

Authors:  Alejandro Sisniega; Gaurav K Thawait; Delaram Shakoor; Jeffrey H Siewerdsen; Shadpour Demehri; Wojciech Zbijewski
Journal:  Skeletal Radiol       Date:  2019-06-06       Impact factor: 2.199

3.  Task-Based Regularization Design for Detection of Intracranial Hemorrhage in Cone-Beam CT.

Authors:  H Dang; J W Stayman; J Xu; A Sisniega; W Zbijewski; X Wang; D H Foos; N Aygun; V E Koliatsos; J H Siewerdsen
Journal:  Conf Proc Int Conf Image Form Xray Comput Tomogr       Date:  2016-07

4.  A practical cone-beam CT scatter correction method with optimized Monte Carlo simulations for image-guided radiation therapy.

Authors:  Yuan Xu; Ti Bai; Hao Yan; Luo Ouyang; Arnold Pompos; Jing Wang; Linghong Zhou; Steve B Jiang; Xun Jia
Journal:  Phys Med Biol       Date:  2015-04-10       Impact factor: 3.609

5.  Acuros CTS: A fast, linear Boltzmann transport equation solver for computed tomography scatter - Part I: Core algorithms and validation.

Authors:  Alexander Maslowski; Adam Wang; Mingshan Sun; Todd Wareing; Ian Davis; Josh Star-Lack
Journal:  Med Phys       Date:  2018-04-06       Impact factor: 4.071

6.  Modeling and evaluation of a high-resolution CMOS detector for cone-beam CT of the extremities.

Authors:  Qian Cao; Alejandro Sisniega; Michael Brehler; J Webster Stayman; John Yorkston; Jeffrey H Siewerdsen; Wojciech Zbijewski
Journal:  Med Phys       Date:  2017-11-27       Impact factor: 4.071

7.  Low-Dose CT Perfusion of the Liver using Reconstruction of Difference.

Authors:  Saeed Seyyedi; Eleni Liapi; Tobias Lasser; Robert Ivkov; Rajeev Hatwar; J Webster Stayman
Journal:  IEEE Trans Radiat Plasma Med Sci       Date:  2018-03-05

8.  Statistical reconstruction for cone-beam CT with a post-artifact-correction noise model: application to high-quality head imaging.

Authors:  H Dang; J W Stayman; A Sisniega; J Xu; W Zbijewski; X Wang; D H Foos; N Aygun; V E Koliatsos; J H Siewerdsen
Journal:  Phys Med Biol       Date:  2015-07-30       Impact factor: 3.609

9.  Cone-Beam CT of Traumatic Brain Injury Using Statistical Reconstruction with a Post-Artifact-Correction Noise Model.

Authors:  H Dang; J W Stayman; A Sisniega; J Xu; W Zbijewski; J Yorkston; N Aygun; V Koliatsos; J H Siewerdsen
Journal:  Proc SPIE Int Soc Opt Eng       Date:  2015-02-21

10.  Model-based iterative reconstruction for flat-panel cone-beam CT with focal spot blur, detector blur, and correlated noise.

Authors:  Steven Tilley; Jeffrey H Siewerdsen; J Webster Stayman
Journal:  Phys Med Biol       Date:  2015-12-09       Impact factor: 3.609

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.