Literature DB >> 24414076

Computed tomographic measurement of acetabular and femoral component version in total hip arthroplasty.

Takaaki Fujishiro1, Shinya Hayashi, Noriyuki Kanzaki, Shingo Hashimoto, Masahiro Kurosaka, Taiki Kanno, Takeshi Masuda.   

Abstract

PURPOSE: The purposes of the present study were (1) to investigate the variation and accuracy of both acetabular and femoral component version on the axial computed tomographic (CT) images, and (2) to better define the associations between the components version and clinical factors.
METHODS: We investigated acetabular and femoral component orientation in 1,411 primary total hip arthroplasties that had been performed without computer-assisted navigation. Version of the acetabular and femoral components was measured on the axial CT images.
RESULTS: The component version was significantly greater than the native version in both acetabular and femoral version. There was a significant correlation between the stem and native femoral versions, but not between the acetabular component and native acetabular versions.
CONCLUSION: This study identifies several features that might help analyse the effect of pre-operative native acetabular and femoral version on the variation of component alignment.

Entities:  

Mesh:

Year:  2014        PMID: 24414076      PMCID: PMC3997775          DOI: 10.1007/s00264-013-2264-z

Source DB:  PubMed          Journal:  Int Orthop        ISSN: 0341-2695            Impact factor:   3.075


  16 in total

1.  Computed tomography measurement of the accuracy of component version in total hip arthroplasty.

Authors:  Andrew P Wines; David McNicol
Journal:  J Arthroplasty       Date:  2006-08       Impact factor: 4.757

2.  A comparison of alternative methods of measuring femoral anteversion.

Authors:  N Sugano; P C Noble; E Kamaric
Journal:  J Comput Assist Tomogr       Date:  1998 Jul-Aug       Impact factor: 1.826

3.  Evaluation of the accuracy of femoral component orientation by the CT-based fluoro-matched navigation system.

Authors:  Shinya Hayashi; Takayuki Nishiyama; Takaaki Fujishiro; Shingo Hashimoto; Noriyuki Kanzaki; Kotaro Nishida; Ryosuke Kuroda; Masahiro Kurosaka
Journal:  Int Orthop       Date:  2013-03-20       Impact factor: 3.075

4.  Computed tomography analysis of acetabular anteversion and abduction.

Authors:  Eric S Stem; Mary I O'Connor; Mark J Kransdorf; Julia Crook
Journal:  Skeletal Radiol       Date:  2006-03-29       Impact factor: 2.199

5.  A ten-year follow-up of one hundred consecutive Müller curved-stem total hip-replacement arthroplasties.

Authors:  C J Sutherland; A H Wilde; L S Borden; K E Marks
Journal:  J Bone Joint Surg Am       Date:  1982-09       Impact factor: 5.284

6.  Dislocations after total hip-replacement arthroplasties.

Authors:  G E Lewinnek; J L Lewis; R Tarr; C L Compere; J R Zimmerman
Journal:  J Bone Joint Surg Am       Date:  1978-03       Impact factor: 5.284

7.  A comparison of surgeon estimation and computed tomographic measurement of femoral component anteversion in cementless total hip arthroplasty.

Authors:  Lawrence D Dorr; Zhinian Wan; Aamer Malik; Jinjun Zhu; Manish Dastane; Prashant Deshmane
Journal:  J Bone Joint Surg Am       Date:  2009-11       Impact factor: 5.284

8.  The accuracy of free-hand cup positioning--a CT based measurement of cup placement in 105 total hip arthroplasties.

Authors:  G Saxler; A Marx; D Vandevelde; U Langlotz; M Tannast; M Wiese; U Michaelis; G Kemper; P A Grützner; R Steffen; M von Knoch; T Holland-Letz; K Bernsmann
Journal:  Int Orthop       Date:  2004-05-15       Impact factor: 3.075

9.  Acetabular component orientation in 834 total hip arthroplasties using a manual technique.

Authors:  Yukihide Minoda; Toru Kadowaki; Mitsunari Kim
Journal:  Clin Orthop Relat Res       Date:  2006-04       Impact factor: 4.176

10.  Poor accuracy of freehand cup positioning during total hip arthroplasty.

Authors:  B H Bosker; C C P M Verheyen; W G Horstmann; N J A Tulp
Journal:  Arch Orthop Trauma Surg       Date:  2007-02-13       Impact factor: 3.067

View more
  7 in total

1.  The effect of acetabular and femoral component version on dislocation in primary total hip arthroplasty.

Authors:  Takaaki Fujishiro; Takafumi Hiranaka; Shingo Hashimoto; Shinya Hayashi; Masahiro Kurosaka; Taiki Kanno; Takeshi Masuda
Journal:  Int Orthop       Date:  2015-07-23       Impact factor: 3.075

2.  Is the acetabular cup orientation after total hip arthroplasty on a two dimension or three dimension model accurate?

Authors:  Benjamin Craiovan; Tobias Renkawitz; Markus Weber; Joachim Grifka; Lutz Nolte; Guoyan Zheng
Journal:  Int Orthop       Date:  2014-04-16       Impact factor: 3.075

3.  Acetabular and Femoral Component Positioning Using Direct Anterior Approach Versus Posterior Approach in Total Hip Arthroplasty.

Authors:  Tarun Goyal; Arghya Kundu Choudhury; Souvik Paul; Tushar Gupta; Lakshmana Das
Journal:  Indian J Orthop       Date:  2021-03-10       Impact factor: 1.251

4.  Accuracy of Low Dose Computed Tomography Scanogram for Measurement of Femoral Version after Locked Intramedullary Nailing.

Authors:  Kristi Lynn Hultman; Rahul Vaidya; Ibraheem Malkawi; Jon Brandon Carlson; Jason Benjamin Wynberg
Journal:  Int Orthop       Date:  2015-11-17       Impact factor: 3.075

5.  Does total hip arthroplasty restore native hip anatomy? three-dimensional reconstruction analysis.

Authors:  Tsung-Yuan Tsai; Dimitris Dimitriou; Guoan Li; Young-Min Kwon
Journal:  Int Orthop       Date:  2014-06-26       Impact factor: 3.075

Review 6.  Femoral anteversion: significance and measurement.

Authors:  Matteo Scorcelletti; Neil D Reeves; Jörn Rittweger; Alex Ireland
Journal:  J Anat       Date:  2020-06-24       Impact factor: 2.610

7.  Optimal combined anteversion range for obtaining a wider range of motion without prosthetic impingement after total hip arthroplasty: a three-dimensional analysis study.

Authors:  Ryo Hidaka; Kenta Matsuda; Masaki Nakamura; Shigeru Nakamura; Hirotaka Kawano
Journal:  J Orthop Surg Res       Date:  2022-04-10       Impact factor: 2.359

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.