OBJECTIVES: Zirconia ceramic material has been widely used in implant dentistry. In this in vitro study the physiochemical properties of titanium and zirconia materials were investigated and the affinity of different bacteria to different materials was compared. METHODS: Disc samples with different surface states were used: polished partially stabilized zirconia (PZ), titanium blasted with zirconia (TBZ), titanium blasted with zirconia then acid etched (TBZA), and polished titanium (PT) as a control. Surface topography was examined using scanning electron microscopy and profilometry. Contact angle, surface free energy (SFE), surface microhardness and chemical composition were determined. Disc samples were separately incubated with Streptococcus mitis and Prevotella nigrescens, either with or without pre-coating with human saliva, for 6h and the surface area covered by bacteria was calculated from fluorescence microscope images. RESULTS: PZ and TBZ exhibited lower surface free energy and lesser surface wettability than PT. Also, PZ and TBZ surfaces showed lower percentage of bacterial adhesion compared with control PT surface. CONCLUSIONS: The zirconia material and titanium blasted with zirconia surface (TBZ surface) showed superior effect to titanium material in reducing the adhesion of the experimented bacteria especially after coating with saliva pellicle. Modifying titanium with zirconia lead to have the same surface properties of pure zirconia material in reducing bacterial adhesion. SFE appears to be the most important factors that determine initial bacterial adhesion to smooth surface.
OBJECTIVES:Zirconia ceramic material has been widely used in implant dentistry. In this in vitro study the physiochemical properties of titanium and zirconia materials were investigated and the affinity of different bacteria to different materials was compared. METHODS: Disc samples with different surface states were used: polished partially stabilized zirconia (PZ), titanium blasted with zirconia (TBZ), titanium blasted with zirconia then acid etched (TBZA), and polished titanium (PT) as a control. Surface topography was examined using scanning electron microscopy and profilometry. Contact angle, surface free energy (SFE), surface microhardness and chemical composition were determined. Disc samples were separately incubated with Streptococcus mitis and Prevotella nigrescens, either with or without pre-coating with human saliva, for 6h and the surface area covered by bacteria was calculated from fluorescence microscope images. RESULTS: PZ and TBZ exhibited lower surface free energy and lesser surface wettability than PT. Also, PZ and TBZ surfaces showed lower percentage of bacterial adhesion compared with control PT surface. CONCLUSIONS: The zirconia material and titanium blasted with zirconia surface (TBZ surface) showed superior effect to titanium material in reducing the adhesion of the experimented bacteria especially after coating with saliva pellicle. Modifying titanium with zirconia lead to have the same surface properties of pure zirconia material in reducing bacterial adhesion. SFE appears to be the most important factors that determine initial bacterial adhesion to smooth surface.
Authors: Fernanda H Schünemann; María E Galárraga-Vinueza; Ricardo Magini; Márcio Fredel; Filipe Silva; Júlio C M Souza; Yu Zhang; Bruno Henriques Journal: Mater Sci Eng C Mater Biol Appl Date: 2019-01-16 Impact factor: 7.328
Authors: Cate Wisdom; Sarah Kay VanOosten; Kyle W Boone; Dmytro Khvostenko; Paul M Arnold; Malcolm L Snead; Candan Tamerler Journal: J Mol Eng Mater Date: 2016-08-22