Literature DB >> 20940353

Ethanol wet-bonding challenges current anti-degradation strategy.

F T Sadek1, R R Braga, A Muench, Y Liu, D H Pashley, F R Tay.   

Abstract

The long-term effectiveness of chlorhexidine as a matrix metalloproteinase (MMP) inhibitor may be compromised when water is incompletely removed during dentin bonding. This study challenged this anti-bond degradation strategy by testing the null hypothesis that wet-bonding with water or ethanol has no effect on the effectiveness of chlorhexidine in preventing hybrid layer degradation over an 18-month period. Acid-etched dentin was bonded under pulpal pressure simulation with Scotchbond MP and Single Bond 2, with water wet-bonding or with a hydrophobic adhesive with ethanol wet-bonding, with or without pre-treatment with chlorhexidine diacetate (CHD). Resin-dentin beams were prepared for bond strength and TEM evaluation after 24 hrs and after aging in artificial saliva for 9 and 18 mos. Bonds made to ethanol-saturated dentin did not change over time with preservation of hybrid layer integrity. Bonds made to CHD pre-treated acid-etched dentin with commercial adhesives with water wet-bonding were preserved after 9 mos but not after 18 mos, with severe hybrid layer degradation. The results led to rejection of the null hypothesis and highlight the concept of biomimetic water replacement from the collagen intrafibrillar compartments as the ultimate goal in extending the longevity of resin-dentin bonds.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20940353      PMCID: PMC3144072          DOI: 10.1177/0022034510385240

Source DB:  PubMed          Journal:  J Dent Res        ISSN: 0022-0345            Impact factor:   6.116


  32 in total

Review 1.  Small organic molecular imprinted materials: their preparation and application.

Authors:  Xiaoman Jiang; Na Jiang; Haixia Zhang; Mancang Liu
Journal:  Anal Bioanal Chem       Date:  2007-06-02       Impact factor: 4.142

2.  Application of hydrophobic resin adhesives to acid-etched dentin with an alternative wet bonding technique.

Authors:  Fernanda T Sadek; David H Pashley; Yoshihiro Nishitani; Marcella R Carrilho; Adam Donnelly; Marco Ferrari; Franklin R Tay
Journal:  J Biomed Mater Res A       Date:  2008-01       Impact factor: 4.396

3.  Durability of resin-dentin bonds to water- vs. ethanol-saturated dentin.

Authors:  K Hosaka; Y Nishitani; J Tagami; M Yoshiyama; W W Brackett; K A Agee; F R Tay; D H Pashley
Journal:  J Dent Res       Date:  2009-02       Impact factor: 6.116

4.  The incorporation of chlorhexidine in a two-step self-etching adhesive preserves dentin bond in vitro.

Authors:  Jianfeng Zhou; Jianguo Tan; Li Chen; Deli Li; Yao Tan
Journal:  J Dent       Date:  2009-06-26       Impact factor: 4.379

5.  Influence of chlorhexidine concentration on the durability of etch-and-rinse dentin bonds: a 12-month in vitro study.

Authors:  Lorenzo Breschi; Federica Cammelli; Erika Visintini; Annalisa Mazzoni; Francesca Vita; Marcela Carrilho; Milena Cadenaro; Stephen Foulger; Giovanni Mazzoti; Franklin R Tay; Roberto Di Lenarda; David Pashley
Journal:  J Adhes Dent       Date:  2009-06       Impact factor: 2.359

6.  Adhesion to chondroitinase ABC treated dentin.

Authors:  Annalisa Mazzoni; David H Pashley; Alessandra Ruggeri; Francesca Vita; Mirella Falconi; Roberto Di Lenarda; Lorenzo Breschi
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2008-07       Impact factor: 3.368

7.  Two-photon laser confocal microscopy of micropermeability of resin-dentin bonds made with water or ethanol wet bonding.

Authors:  Salvatore Sauro; Timothy F Watson; Francesco Mannocci; Katsuya Miyake; Bradford P Huffman; Franklin R Tay; David H Pashley
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-07       Impact factor: 3.368

8.  Chlorhexidine release and water sorption characteristics of chlorhexidine-incorporated hydrophobic/hydrophilic resins.

Authors:  N Hiraishi; C K Y Yiu; N M King; F R Tay; D H Pashley
Journal:  Dent Mater       Date:  2008-04-24       Impact factor: 5.304

9.  In vitro performance of nano-heterogeneous dentin adhesive.

Authors:  Q Ye; J G Park; E Topp; Y Wang; A Misra; P Spencer
Journal:  J Dent Res       Date:  2008-09       Impact factor: 6.116

10.  Sorption of chlorhexidine on cellulose: mechanism of binding and molecular recognition.

Authors:  Richard S Blackburn; Anna Harvey; Lorna L Kettle; Avinash P Manian; John D Payne; Stephen J Russell
Journal:  J Phys Chem B       Date:  2007-06-29       Impact factor: 2.991

View more
  37 in total

1.  Improved dental adhesive formulations based on reactive nanogel additives.

Authors:  R R Morães; J W Garcia; N D Wilson; S H Lewis; M D Barros; B Yang; C S Pfeifer; J W Stansbury
Journal:  J Dent Res       Date:  2011-10-21       Impact factor: 6.116

2.  Cross-linked dry bonding: A new etch-and-rinse technique.

Authors:  Jianfeng Zhou; Ayaka Chiba; Debora L S Scheffel; Josimeri Hebling; Kelli Agee; Junji Tagami; Jianquo Tan; Dalia Abuelenain; Manar Abu Nawareg; Ali H Hassan; Lorenzo Breschi; Franklin R Tay; David H Pashley
Journal:  Dent Mater       Date:  2016-07-16       Impact factor: 5.304

Review 3.  Mechanisms regulating the degradation of dentin matrices by endogenous dentin proteases and their role in dental adhesion. A review.

Authors:  Camila Sabatini; David H Pashley
Journal:  Am J Dent       Date:  2014-08       Impact factor: 1.522

Review 4.  Strategies to prevent hydrolytic degradation of the hybrid layer-A review.

Authors:  Leo Tjäderhane; Fabio D Nascimento; Lorenzo Breschi; Annalisa Mazzoni; Ivarne L S Tersariol; Saulo Geraldeli; Arzu Tezvergil-Mutluay; Marcela Carrilho; Ricardo M Carvalho; Franklin R Tay; David H Pashley
Journal:  Dent Mater       Date:  2013-08-14       Impact factor: 5.304

5.  Durable bonds at the adhesive/dentin interface: an impossible mission or simply a moving target?

Authors:  Paulette Spencer; Qiang Ye Jonggu Park; Anil Misra; Brenda S Bohaty; Viraj Singh; Ranga Parthasarathy; Fábio Sene; Sérgio Eduardo de Paiva Gonçalves; Jennifer Laurence
Journal:  Braz Dent Sci       Date:  2012-01

Review 6.  Limitations in bonding to dentin and experimental strategies to prevent bond degradation.

Authors:  Y Liu; L Tjäderhane; L Breschi; A Mazzoni; N Li; J Mao; D H Pashley; F R Tay
Journal:  J Dent Res       Date:  2011-01-10       Impact factor: 6.116

7.  Inhibition of endogenous human dentin MMPs by Gluma.

Authors:  Camila Sabatini; Débora L S Scheffel; Régis H Scheffel; Kelli A Agee; Katelyn Rouch; Masahiro Takahashi; Lorenzo Breschi; Annalisa Mazzoni; Leo Tjäderhane; Franklin R Tay; David H Pashley
Journal:  Dent Mater       Date:  2014-05-17       Impact factor: 5.304

8.  Influence of nanogel additive hydrophilicity on dental adhesive mechanical performance and dentin bonding.

Authors:  Valeria B Gotti; Américo B Correr; Steven H Lewis; Victor P Feitosa; Lourenço Correr-Sobrinho; Jeffrey W Stansbury
Journal:  Dent Mater       Date:  2016-09-21       Impact factor: 5.304

9.  Can 1% chlorhexidine diacetate and ethanol stabilize resin-dentin bonds?

Authors:  Adriana Pigozzo Manso; Rosa Helena Miranda Grande; Ana Karina Bedran-Russo; Alessandra Reis; Alessandro D Loguercio; David Henry Pashley; Ricardo Marins Carvalho
Journal:  Dent Mater       Date:  2014-05-09       Impact factor: 5.304

Review 10.  MMP Inhibitors on Dentin Stability: A Systematic Review and Meta-analysis.

Authors:  A F Montagner; R Sarkis-Onofre; T Pereira-Cenci; M S Cenci
Journal:  J Dent Res       Date:  2014-06-16       Impact factor: 6.116

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.