Glycan labeling strategies and their use in identification and quantification.

Most methods for the analysis of oligosaccharides from biological sources require a glycan derivatization step: glycans may be derivatized to introduce a chromophore or fluorophore, facilitating detection after chromatographic or electrophoretic separation. Derivatization can also be applied to link charged or hydrophobic groups at the reducing end to enhance glycan separation and mass-spectrometric detection. Moreover, derivatization steps such as permethylation aim at stabilizing sialic acid residues, enhancing mass-spectrometric sensitivity, and supporting detailed structural characterization by (tandem) mass spectrometry. Finally, many glycan labels serve as a linker for oligosaccharide attachment to surfaces or carrier proteins, thereby allowing interaction studies with carbohydrate-binding proteins. In this review, various aspects of glycan labeling, separation, and detection strategies are discussed.

Introduction

pan class="Chemical">Glycan analysis is increasingly applied in biological research, clinical analysis, and pharmaceutical biotechnological production. Specific glycosylation patterns have been associated with states of health and disease [1-4]. Moreover, glycosylation changes may modulate the biological activity of proteins, as demonstrated, for example, for the glycosylation of the Fc moiety of recombinant immunoglobulin G [5, 6].

Many approaches for analysis of n class="Chemical">oligosaccharides from glycoproteins have been described [7-9], and strategies for the analysis of the glycosylation of immunoglobulin G (both natural and recombinant) have recently been summarized [10]. A large number of methods focus on the analysis of released and subsequently derivatized glycans. These approaches allow in-depth analysis of the oligosaccharide structure independent of the carrier glycoprotein, but provide no information on the attachment site of the glycan. As the application of separation methods with optical or mass-spectrometric detection for the characterization of glycans is hindered by the lack of a chromophore and their poor ionization properties, a wide variety of derivatization strategies with a large number of different labels have been applied.

In this review an overview of the techniques applicable for n class="Chemical">glycan derivatization is given, e.g., reductive amination, Michael addition, hydrazide labeling, and permethylation, followed by some aspects on purification of derivatized glycans. Additionally, strategies for the analysis of tagged oligosaccharides using chromatographic and electromigrative separation techniques as well as mass spectrometry (MS) and their use in quantitation will be addressed. Criteria for the choice of derivatization strategies and detection methods will be discussed.

Derivatization strategies

A large number of n class="Chemical">glycan derivatization strategies have been described in the literature. The most common reaction employed is the reductive amination. Permethylation is also often applied. Alternatively, Michael addition or hydrazide labeling may be applied. Various compounds which provide the required functional group for the labeling reaction can be used. The application of a specific release method may restrict the labeling options. Reductive amination, Michael addition, and hydrazide labeling all require the reducing end of the glycan, which is not present on O-glycans released by reductive β-elimination. Labeling reagents are usually present in large excess, and most of the analytical techniques require a sample workup to remove excess labeling reagents. Most frequently, size-exclusion chromatography and solid-phase extraction (SPE) are applied.

Release methods

An efficient, reliable method for the release of n class="Chemical">oligosaccharides from protein or peptide backbones is a prerequisite for their detection [7]. Several methods for N-glycan or O-glycan release have been reported, and are represented in Fig. 1 [7-19].

Fig. 1

Strategies for N-glycan and O-glycan release from glycoproteins and glycopeptides

Strategies for pan class="Chemical">N-glycan and n>n class="Chemical">O-glycan release from glycoproteins and glycopeptides

n class="Chemical">N-Glycans are commonly released enzymatically using PNGase F or A (see Fig. 1). The hydrazinolysis approach is applicable for N-glycans as well as O-glycans [7, 18, 19], yielding glycans with a free reducing terminus. Even though the reaction mechanism of hydrazinolysis is not fully understood, it is generally accepted that glycan release occurs via an initial β-elimination step prior to a reaction with hydrazine resulting in a hydrazone derivate [19]. The method has some major drawbacks, such as the necessity to use anhydrous hydrazine, which is a highly toxic and explosive chemical also used in rocket fuel [20]. Several other disadvantages of the hydrazinolysis method have been given by various groups: one example is the release of O-glycans by hydrazinolysis, which has to be followed by re-N-acetylation and a concomitant acetohydrazone cleavage step, which is crucial in order to obtain intact glycans with a free reducing terminus [7, 9, 18–23].

Enzymatic release of n class="Chemical">O-glycans has a much more limited use owing to the very narrow substrate specificity of the enzymes available. Only two O-glycanases are commercially available [7], the use of which is unfortunately restricted to the liberation of the unsubstituted core 1 disaccharide Galβ1-3GalNacα linked to either serine or threonine. Accordingly, chemical release is the major method for O-linked oligosaccharide liberation and several options have been reported (see Fig. 1), all of which, however, have the inherent risk that a possible, unwanted degradation step called a “peeling” reaction can occur [19]. Peeling refers to a base-catalyzed elimination reaction which results in the loss of the 3-substituent of the innermost residue of an oligosaccharide [19].

Reductive amination

Reaction

n class="Chemical">Glycans can be labeled at their reducing end using reductive amination. In this reaction, a label containing a primary amine group reacts in a condensation reaction with the aldehyde group of the glycan, resulting in an imine or Schiff base, which is reduced by a reducing agent to yield a secondary amine (see Fig. 2a). The reaction is often performed in dimethyl sulfoxide containing acetic acid [24], but alternative approaches using tetrahydrofuran [25] and methanol [26] have been described. An advantage of this labeling approach is the stoichiometric attachment of one label per glycan, allowing a direct quantitation based on fluorescence or UV-absorbance intensity.

Fig. 2

Labeling of glycans. a 2-Aminobenzoic acid (2-AA) labeling via reductive amination, b 1-phenyl-3-methyl-5-pyrazolone labeling via a Michael-type addition, c labeling with phenylhydrazide, and d glycan permethylation

Labeling of n class="Chemical">glycans. a 2-Aminobenzoic acid (2-AA) labeling via reductive amination, b 1-phenyl-3-methyl-5-pyrazolone labeling via a Michael-type addition, c labeling with phenylhydrazide, and d glycan permethylation

Labels

Various labels have been used for the reductive amination of n class="Chemical">glycans. In two reviews, an extensive, though not complete list of labels for reductive amination has been given [27, 28]. The most widely applied labels are 2-aminobenzamide (2-AB), 2-aminobenzoic acid (2-AA), 2-aminopyridine (PA), 2-aminonaphthalene trisulfonic acid (ANTS), and 1-aminopyrene-3,6,8-trisulfonic acid (APTS). Labeling kits are available for the tags 2-AB, 2-AA, and PA (see, e.g., http://www.ludger.com) as well as for labeling with APTS (see http://www.beckmancoulter.com) and ANTS (see http://www.prozyme.com). 2-AB is a label that lacks negative charges and is widely applied in chromatographic analysis. An extensive database has been developed which uses the standardized elution positions of 2-AB-labeled glycans in hydrophilic interaction liquid chromatography (HILIC) with fluorescence detection for structural assignment [29]. PA is also widely used in high performance liquid chromatography (HPLC) profiling [30, 31], and databases for structural assignments based on standardized elution positions have been developed as well [32]. A major drawback of PA is the necessary recrystallization step prior to its use, since the commercially available compound lacks sufficient purity. The 2-AA label carries one negative charge, which makes it very versatile. It is used in HPLC and capillary electrophoresis (CE) separations as well as in positive-mode and negative-mode matrix-assisted laser desorption/ionization (MALDI) analysis, allowing detection of both neutral and sialylated glycan species [33-36]. APTS has three negative charges and is therefore very suitable for CE and capillary gel electrophoresis (CGE; see later) [37, 38]. However, the analysis of APTS-labeled oligosaccharides by MALDI appears to be difficult [39].

Other labels have been explored for their potential in quantitation: A [D4]n class="Chemical">PA label was introduced for glycosylation analysis [40]. Promising results were obtained; however, slight differences in retention times were observed between [H4]PA- and [D4]PA-labeled glycans when they were separated on a C18 column. No other stationary phases have been tested [40].

In an alternative attempt, n class="Chemical">oligosaccharides from chondroitin sulfates were labeled with [H4]2-AA or [D4]2-AA [41, 42], and separation by size exclusion was performed to avoid possible shifts in retention time. A mass shift of only 4 Da was achieved, which may result in a partial overlap of glycan pair isotope envelopes in mass-spectrometric detection. Another option is to label oligosaccharides with [12C6]alanine and [13C6]alanine [43, 44]. With use of this approach, a difference of 6 Da is generated between the two different glycans, which is sufficient to have full resolution of the isotopic patterns of glycan pairs in MS. Moreover, the use of deuterium is avoided, so no retention shifts on C18 columns are observed.

Reducing agent

The most widely applied reducing agent is n class="Chemical">sodium cyanoborohydride. Very high yields of labeled oligosaccharides have been reported using this compound [24]. Alternatively, sodium triacetoxyborohydride [45] and borane-diethylamine [46] have been used; however, these compounds are not widely used within the glycoanalytical field.

As an alternative, we recently described the use of n class="Chemical">2-picoline borane for the reductive amination of oligosaccharides with 2-AA and 2-AB [47]. The use of sodium cyanoborohydride results in the release of the toxic compound hydrogen cyanide, 2-Picoline borane is an efficient, nontoxic alternative. When comparing the two compounds, we observed equal efficacies for reductive amination using various tags such as APTS (unpublished results), 2-AA, and 2-AB [47]. Moreover, 2-picoline borane can be employed in both aqueous and nonaqueous conditions [47]. Owing to its superb properties, it has replaced sodium cyanoborohydride completely in the glycoanalytical protocols used in our laboratory, and we expect this to take place in other laboratories too.

Optimal reaction conditions

The optimal conditions for the reductive amination reaction of n class="Chemical">N-glycans with the 2-AB and 2-AA labels using NaCNBH3 as the reducing agent were reported by Bigge et al. [24] in 1995. The concentration of the labeling agent was recommended to be 0.25 M or greater, whereas more than 1 M reducing agent was required. The derivatization is enhanced by the addition of glacial acetic acid up to a content of 30% (v/v). A reaction temperature of 60 °C was found to be optimal. With use of these conditions, all glycans are derivatized within 2 h, and glycan degradation reactions such as acid-catalyzed loss of sialic acid are minimized. In a different study, the influence of different acids was evaluated for the derivatization of oligosaccharides with APTS [48]. Acids with lower pK a values, such as citric acid, malic acid, and malonic acid, were shown to result in higher yields than acetic acid when the derivatization was performed at 37 °C for 16 h. When higher temperatures and very acidic conditions are applied, partial degradation of the glycans will be induced with loss of sialic acids [49].

Michael addition

Labeling of the reducing end of n class="Chemical">glycans with reagents such as 1-phenyl-3-methyl-5-pyrazolone (PMP) by Michael addition is performed under alkaline conditions [50], thereby avoiding the considerable risk of loss of sialic acids under acidic conditions which is intrinsic to reductive amination reactions (see earlier).

The reaction itself is the nucleophilic addition of a carbanion to an α,β-unsaturated n class="Chemical">carbonyl compound, and is one of the most useful methods for the mild formation of C–C bonds. A detailed structural description of this glycan labeling procedure including the overall reaction scheme has been given by You et al. [50] and can also be found in a simplified version in Fig. 2b. Labeling reagents such as PMP [51, 52] or its methoxy analog 1-(p-methoxy)-phenyl-3-methyl-5-pyrazolone are most often applied [53]. The derivatization reaction itself is a base-catalyzed Michael-type addition involving a two step labeling process in which Michael donor molecules of the labeling reagent are formed and consecutively added to the reducing end of the glycan with a stoichiometry of two label molecules per glycan (II in Fig. 2b; [50]). After the addition of the first label molecule, a water molecule is lost [50], which results in the formation of an α,β-unsaturated carbonyl compound. The following step yields a Michael 1,4-addition product by conjugation of the second label molecule. You et al. [50] introduced the novel labeling reagent 1-(2-naphthyl)-3-methyl-5-pyrazolone for glycan labeling in the presence of an ammonium catalyst, which showed increased sensitivity in UV detection as well as a faster reaction time as compared with the previously applied PMP [50].

The use of the n class="Chemical">PMP label and related tags is restricted as no fluorescent labels have hitherto been reported. Moreover, as two label molecules are added per glycan, the chromatographic properties of the derivatized oligosaccharides are dominated by the tags, which may be disadvantageous in isomer separation.

Hydrazide labeling

Another labeling procedure can be accomplished by a reaction of n class="Chemical">glycans with labels providing a hydrazide end group (for the reaction mechanism, see Fig. 2c). Hydrazide labeling may be performed for mass-spectrometric detection [54] in combination with chromatography [55] or to allow biomolecular interaction analysis [56-59].

Lattova and Perreault [54] demonstrated that the conversion of n class="Chemical">monosaccharides and oligosaccharides to the corresponding phenylhydrazones is quantitative, meaning that no unreacted sugars were observed in the mass spectra after the labeling procedure [54]. In addition, it was shown that low picomolar sample concentrations were sufficient for structural identification by MALDI-MS and electrospray ionization (ESI) MS [55]. Carboxymethyl trimethylammonium hydrazide (Girard’s T reagent) is a label which places a permanent positive charge at the reducing end of a glycan [60]. This label is suitable for sensitive analysis of glycans by MALDI time of flight (TOF) MS.

Shinohara et al. [58] were among the first to introduce n class="Chemical">hydrazide tagging of oligosaccharides for the introduction of a biotin tag, which allows further biomolecular interaction studies by immobilization of the glycan to streptavidin-coated carriers [58]. Several applications of this approach, including the preparation of various hydrazide derivates followed [56, 57]. Leteux et al. [56] described the preparation of biotin hydrazide derivates of oligosaccharides employing biotinyl-l-3-(2-naphthyl)-alanine hydrazide (BNAH) and 6-(biotinyl)-aminocaproyl hydrazide (BACH) in which the ring of the reducing end monosaccharide is nonreduced. In this study BACH, BNAH, and 2-amino-(6-amidobiotinyl)pyridine derivatives (the latter one being obtained under reductive amination conditions) were compared. The BNAH tag combines two advantageous features, i.e., the presence of a chromophore/fluorophore [similar to 2-amino-(6-amidobiotinyl)pyridine] with the presence of an intact pyranose ring of the labeled glycan (similar to BACH derivates) [56]. A constitutive study by the same authors followed, where the same glycan tags conjugated to oligosaccharides on a streptavidin matrix were used to investigate their interaction with monoclonal antibodies, adhesion molecules, and E-, P-, and L-selectins [57].

(Per-)methylation

In permethylation, n class="Chemical">hydrogens on hydroxyl groups, amine groups, and carboxyl groups are replaced by methyl groups, yielding a hydrophobic sugar derivative (Fig. 2d) [61]. This is an advantageous derivatization step as it enhances the glycans’ signal strength in MS with both ESI and MALDI [8]. Permethylation facilitates the spectral interpretation since both acidic and neutral structures can be measured in the positive ion mode [62] as the sialic acids are stabilized after the procedure [22]. Moreover, tandem MS of sodium adducts of permethylated glycans provides detailed information on linkage positions [63]. For structural characterization of glycans, permethylation is often preceded by reduction of the reducing end aldose with sodium borohydride to achieve an open-ring alditol, thereby providing a mass tag which facilitates spectral interpretation [63].

Ciucanu and Kerek [64] have introduced the basic permethylation protocol which has become a standard procedure and is applied in many cases for n class="Chemical">O-glycan as well as N-glycan analysis with only minor alterations [50, 62, 63, 65–68]. Morelle and Michalski [22] provided a detailed step-by-step protocol and have summarized advantages and disadvantages of the procedure. Recently, Kang et al. [69] proposed packing a solid phase (either sodium hydroxide mesh beads or powder) in microspin columns or in fused-silica capillaries to allow effective and quantitative microscale derivatization of oligosaccharides in a short time [69]. The authors subsequently adapted this miniaturized approach to create a high-throughput method and combined it with an isotope labeling strategy [70, 71].

Recently, an elegant approach for sequential double permethylation for the analysis of n class="Chemical">sulfated glycans was introduced. Briefly, sulfated glycan samples are permethylated prior to the methanolytic cleavage of their sulfate groups. These oligosaccharides are then subjected to a second permethylation step using deuteromethyl iodide to label the hydroxyl groups resulting from methanolysis. By comparing the collision-induced dissociation (CID) MS2 spectra of permethylated and permethylated plus deuteromethylated samples, one can calculate the initial number of attached sulfate groups on the glycan. This method allows the detection and structural characterization of sulfated glycans using MS, avoiding the problem of signal suppression due to the presence of sulfate groups [72].

Alternative methylation protocols solely transform the n class="Chemical">carboxyl groups of monosaccharides such as sialic acids into methyl esters, thereby stabilizing sialic acid linkages for subsequent mass-spectrometric analysis [73].

Strategies for purification

After derivatization, labeled n class="Chemical">glycans often have to be purified prior to analysis. Not only does the excess of salts have to be removed (e.g., for MALDI analysis), but also the concentration of the labeling reagent, normally present in large excess during the labeling step, should be reduced. Five major strategies are applied for this purpose: SPE [22, 29, 34, 74, 75], liquid–liquid extraction [64], gel filtration [76, 77], paper chromatography [23], and precipitation [75]. Typical examples of purification strategies are summarized in Table 1. SPE is mainly performed after reductive amination and hydrazide labeling [55], whereas liquid–liquid extraction is the method of choice after permethylation [61, 64, 69] or Michael addition [51, 52, 78]. In permethylation procedures, liquid–liquid extraction may be followed by C18 SPE [79]. Paper chromatography may be used after reductive amination and hydrazide labeling [19, 80]. Precipitation with acetone is not widely applied, but may be used to remove proteins [75]. The strategies strongly differ in complexity as well as time consumption of sample handling. Among the five strategies, SPE is the method of choice for analyzing larger sample cohorts as it can be adapted to high-throughput setups [34]. The diversity of stationary phases for SPE is relatively large, and its use in purification of derivatized glycans is extensive. Several stationary phases have been used for purification of derivatized glycans by SPE: reverse phase (RP), porous graphitized carbon (PGC), HILIC, and anion-exchange chromatography.

Table 1

Sample purification after glycan labeling

Method	Material	Label	Comments	References
SPE	RP, C18	RA, aniline		[43]
SPE	RP, C18	Permethylation	TFA may be added	[22, 72, 85]
SPE	RP, C18	HL, BACH		[55]
SPE	PGC	RA, 2-AB	Sample application in water, elution using 25% (v/v) ACN	[83]
SPE	PGC	RA, benzylamine	Sample application in water, elution using 20% (v/v) ACN	[82]
SPE	HILIC, nylon filter, Oasis HLB or amide-2	RA, 2-AA	Sample application in 95% ACN, elution using water	[33, 86]
SPE	HILIC, cellulose	RA, 2-AA	Sample application in 80% ACN, elution using water	[34]
SPE	HILIC, microelution plate	RA, 2-AB	Sample application in 80% ACN, elution using water	[29]
SPE	HILIC, DPA-6S	RA, APTS	Sample application in 90% ACN, elution using water	[87]
Gel filtration	Sephadex G10	RA, APTS	Gel filtration in 96-well format in filter plates	[38]
Gel filtration	Toyopearl HW-40F	RA, APTS		[88]
Gel filtration	Sephadex G15	RA, PA		[89, 90]
Liquid–liquid extraction	Water/chloroform	Permethylation	Permethylated glycans are in the organic (lower) phase	[62, 64, 69, 91]
Liquid–liquid extraction	Water/dichloromethane	Permethylation	Permethylated glycans are in the organic (lower) phase	[61]
Liquid–liquid extraction	Water/ethyl acetate	HL, phenylhydrazine	Labeled glycans are in the aqueous phase	[54]
Liquid–liquid extraction	Water/butyl ether	MA, PMP	Labeled glycans are in the aqueous phase	[51]
Liquid–liquid extraction	Water/chloroform	MA, PMP	Labeled glycans are in the aqueous phase	[52, 78]
Paper chromatography	3 MM Whatman filter paper	RA, 2-AB, DAP	Glycans are eluted using water	[19, 80]
Precipitation	Acetone	RA, PA	Precipitation with water-free acetone was conducted 3 times	[75]

SPE solid-phase extraction, RP reverse phase, PGC porous graphitized carbon, HILIC hydrophilic interaction liquid chromatography, RA reductive amination, HL hydrazide labeling, BACH 6-(biotinyl)-aminocaproyl hydrazide, 2-AB 2-aminobenzamide, 2-AA 2-aminobenzoic acid, APTS 1-aminopyrene-3,6,8-trisulfonic acid, PA 2-aminopyridine, MA Michael addition, PMP 1-phenyl-3-methyl-5-pyrazolone, DAP 2,6-diaminopyridine, TFA trifluoroacetic acid, ACN acetonitrile

Sample purification after pan class="Chemical">glycan labeling

SPE solid-phase extraction, RP reverse phase, PGC porous graphitized n class="Chemical">carbon, HILIC hydrophilic interaction liquid chromatography, RA reductive amination, HL hydrazide labeling, BACH 6-(biotinyl)-aminocaproyl hydrazide, 2-AB 2-aminobenzamide, 2-AA 2-aminobenzoic acid, APTS 1-aminopyrene-3,6,8-trisulfonic acid, PA 2-aminopyridine, MA Michael addition, PMP 1-phenyl-3-methyl-5-pyrazolone, DAP 2,6-diaminopyridine, TFA trifluoroacetic acid, ACN acetonitrile

The introduction of hydrophobic properties by derivatization of native n class="Chemical">glycans (e.g., using the 2-AB label, see also later) is necessary for their adsorption to RP material, since nonderivatized glycans do not show sufficient retention on this material.

PGC is most widely and originally applied for nonderivatized n class="Chemical">glycans [81], but its use with labeled glycans has also been reported [82, 83]. Even though the mechanism is not well understood [84], the optimized method is highly specific for glycans. Elution is usually performed with acetonitrile/water mixtures containing trifluoroacetic acid (Table 1). The drawbacks of this method are the relatively high costs of the PGC and the fact that excess label may not be removed, depending on the properties of the label.

An upcoming approach for purification of mainly reductively aminated n class="Chemical">glycans is HILIC [29, 33, 34]. Several HILIC stationary phases have been described. In this approach, glycans are retained on the basis of their hydrophilic properties, whereas less hydrophilic excess label may be removed. We recently described the application of cellulose for purification of 2-AA-labeled glycans on a high-throughput platform [34]. Since elution of the derivatized glycans can be performed with water, samples can be stored immediately without the risk of the acid-catalyzed hydrolysis of sialic acids.

n class="Chemical">Glycan purification strategies may also include fractionation by anion-exchange chromatography of oligosaccharides labeled with PA or 2-AB, allowing the separation of neutral from sialylated glycans [92, 93].

Separation and detection

Electromigrative separation techniques

Electromigrative separation techniques are now frequently applied in n class="Chemical">glycan and carbohydrate analysis, providing high-speed separations and high resolution as has been summarized in a number of reviews [39, 94–101]. The separations are based on differences in the effective electrophoretic mobility of the analytes in the separation medium, when an external voltage is applied. Whereas “acidic” glycans carrying sialic acid, glucuronic acid, sulfate, or phosphate are negatively charged at low pH (pK a of sialic acids is 2.0–2.8 [102]), “neutral” glycans will only exhibit partial negative charges at very high pH owing to the deprotonation of hydroxyl groups (see also “High-pH anion-exchange chromatography”).

The electromigrative separation techniques applied so far include CE, micellar electrokinetic chromatography (MEKC), gel electrophoresis (also called “fluorescence-assisted n class="Chemical">carbohydrate electrophoresis), CGE, and capillary electrochromatography (see Table 2). CE gives rise to a charge-based separation; therefore, sialoforms are relatively easy to separate with high resolution [34]. An interesting approach for the separation of APTS-labeled glycans was presented by Zhuang et al. [103]. The authors used chip technology and CE [background electrolyte (BGE) 1 mM phosphate and 20 mM N-(2-hydroxyethyl)piperazine-N′-ethanesulfonic acid at pH 6.8]. A very fast analysis (less than 3 min) was possible with high resolution (see Fig. 3). Further separation based on the size and the shape of the glycans needs a more careful optimization of the BGE, but can be achieved by optimizing the pH and the concentration of organic modifiers in the BGE [104, 105]. Alternatively, size-dependent separation can be introduced using MEKC or CGE, enabling the separation of structural isomers. Sometimes borate is used to further enhance the separation selectivity [106, 107]. A number of methods for 2-AA- and APTS-labeled glycans have been published, mainly including polyethylene glycol (molecular weight 20,000–300,000) as the sieving matrix [36, 108–110]. Multiplexing using a DNA sequencer has been developed for high-throughput glycoprofiling of APTS-labeled glycans [37, 38, 77]. The major disadvantage of CGE-based methods is their incompatibility with MS, so the identification of signals is complicated and can only be achieved by standards or additional experiments such as the reanalysis of the sample after exoglycosidase treatment [36, 37, 110]. In recent years there has thus been an increase in the use of capillary electrochromatography for the analysis of glycans [111-117]. This technique allows charge-based separation driven by the external electric field, but also provides orthogonal chromatographic interaction for enhanced selectivity. Further growth of this approach can be anticipated, especially when it is used in combination with MS.

Table 2

Some typical methods and applications of electromigrative separation techniques for oligosaccharide analysis

Application	Derivatization	Separation technique	Detection	Background electrolyte	Comments	References
N-Glycome mapping	APTS	CGE	LIF 488 nm	POP-6 and POP-7 (Bio-Rad)	Sequencer technology	[38]
Glycoprotein and glycan standards	APTS	CGE	LIF 488 nm	Polyacrylamide polymera in 89 mM Tris, 89 mM borate, 2.2 mM EDTA	Sequencer technology	[37]
					Exoglycosidases and standards for identification
Influenza A virus hemagglutinin	APTS	CGE	LIF 488 nm	POP-6 (Bio-Rad)	Sequencer technology	[88]
Glycoprotein standards	APTS	CGE	LIF 488 nm	25 mM acetate pH 4.75 with 0.4% PEOb		[108]
Recombinant monoclonal antibody	APTS	CGE	LIF 488 nm	Kit system based on gel electrophoresis	Coated capillary, enzymatic digestions for identification	[135]
Glucose ladder standard	ANTS	CGE	LIF 325 nm	25 mM ammonium acetate, 0–1% PEO (300,000)	Neutral capillary coating	[136]
Glucose ladder standard, RNase B	APTS	CGE	LIF 488 nm	25 mM ammonium acetate, 0-1% PEOb	Neutral capillary coating	[137]
Fetuin	APTS	CGE	LIF 488 nm	25 mM ammonium acetate, 0.4% PEO (300,000)	Neutral capillary coating, enzymatic digestions for identification	[138]
α1-Acid glycoprotein	2-AA	CGE	LIF 325 nm	100 mM Tris–borate (pH 8.3), 10% PEG (70,000)	Neutral (DB-1) capillary	[110]
					Linkage differentiation
Monoclonal antibody	2-AA	CGE	LIF 325 nm	100 mM Tris–borate (pH 8.3), 10% PEG (35,000)	Neutral (DB-1) capillary	[36]
					Linkage differentiation
Antibody pharmaceuticals	3-AA, APTS	CGE	LIF 488 and 325 nm	3-AA: 100 mM Tris–borate pH 8.3 with 10% PEG (70,000)	Neutral (DB-1) capillary	[109]
				APTS: 50 mM Tris–acetate pH 7.0 with 0.5% PEG (70,000)
Serum IgG	APTS	CGE	LIF 488 nm	POP-7 gel buffer	Sequencer technology	[77]
					Clinical application
Fetuin	APTS	CGE	LIF 488 nm	25 mM phosphate pH 2.5 or 25 mM acetate pH 4.75 with 0–0.8% PEO (300,000)	Neutral capillary coating	[139]
Chondroitin sulfate type proteoglycans	2-Aminoacridone	CGE	LIF 488 nm	100 mM Tris–borate pH 8.0 with 1% PEG (70,000) or	Use of a neutral capillary coating	[140]
	2-AA		LIF 325 nm	100 mM Tris–borate pH 8.3 with 10% PEG 70,000
Chondroitine sulfate, trypsin inhibitor ulinastatin	None	MEKC, CGE	UV 214 nm	50 mM borate pH 9.3, 100 mM SDS or	Partial use of a neutral capillary coating	[141]
	2-Aminoacridone		LIF 488 nm	100 mM Tris–borate pH 8.0 with 1% PEG (70,000) or
	2-AA		LIF 325 nm	100 mM Tris–borate pH 8.3 with 10% PEG (70,000)
RNase B, hen egg albumin, bovine serum fetuin	2-Aminoacridone	MEKC	LIF 488 nm	500 mM sodium borate pH 8.87, 80 mM taurodeoxycholate		[127]
IgG	2-Aminoacridone	MEKC	LIF 442 nm	300 mM boric acid, 80 mM taurodeoxycholic acid, pH 9.2 (NaOH)		[129]
RNase B	2-Aminoacridone	MEKC	LIF 442 nm	300 mM boric acid , 80 mM taurodeoxycholic acid, pH 9.2 (NaOH)		[128]
Glycosaminoglycan disaccharides	2-Aminoacridone, ANTS	FACE	Fluorescence	FACE carbohydrate analysis kit from Prozyme (http://www.prozyme.com)		[142, 143]
RNase B, α1-acid glycoprotein	2-AB	MEKC and CD-CE	UV 254 nm	50 mM phosphate, 150 mM SDS, pH 6.7 or		[98]
				50 mM phosphate, pH 6.7 (NaOH/TEA), 4% SBE-γ-CD
Maltoheptaose standard, RNase B	APTS	CE and CGE	Off-line MALDI; UV 254 nm	10 mM ammonium actetate pH 4.75 or	Neutral poly(vinyl alcohol) coating	[39]
				25 mM ammonium acetate pH 4.75 with 0.4% PEOb	CE with fraction collector
Fetuin, α1-acid glycoprotein, IgG, transferrin	9-Fluorenylmethyl chloroformate	CE	MS	50 mM ammonoium acetate		[130]
Maltose ladder standard	Aminonaphthalene monosulfonic, disulfonic, and trisulfonic acid	CE	UV 235 nm	50 mM triethylammonium phosphate, pH 2.5	Reverse EOF	[144]
High-mannose N-glycans RNase B, xyloglucan, acetylchitooligosaccharides	6-Aminoquinoline, PA	CE	UV 240 nm	100 mM sodium phosphate, 50 mmM Bu4N+, pH 5.0	Polyether coating	[131]
Dextran ladder, monosaccharides	APTS	CE	LIF 488 nm	100 or 200 mM borate pH 10.2 or 50 mM phosphate pH 2.2	Linkage differentiation	[126]
Monclonal antibody characterization	APTS	CE	LIF 488 nm and MS	40 mM EACA pH 4.5 (HOAc)	Hydroxypropylmethylcellulose or poly(vinyl alcohol) coating	[105]
RNase B, asialofetuine, α1-acid glycoprotein	APTS	Chip-CE	LIF 488 nm	1 mM phosphate, 20 mM HEPES, pH 6.8		[103]
Cellobiohydrolase, RNase B	APTS	CE	MS	25 mM ammonium acetate	Separation of phosphorylated isomers	[145]
Dextran ladder	ANTS	CE	MS	1% acetic acid/NH4OH, pH 3.4		[146]
Standards, fetuin, ovalbumin	ANTS	CE	LIF 325 nm	50 mM phosphate pH 2.5		[147]
Standards and beverages	None	CE	Amperometric	100 mM NaOH		[123]
Wine samples	None	CE	MS	300 mM diethylamine		[122]
Fetuin, α1-acid glycoprotein, erythropoietin	None	CE	MS	100 mM EACA, 900 mM NH3, 70% MeOH	MS/MS characterization	[104]
Disaccharide standards	None	CE	Indirect UV 400 nm; or direct UV 195 nm	6 mM p-nitrophenol, 175 mM sodium borate pH 10.0	Borate complexation	[118]
Mono- and disaccharides	None	CEC	MS	Acetonitrile/water/ammonium formate mobile phase		[113]
O-Glycans from bovine mucin, bile salt-stimulated lipase	None	CEC	MS	2.4 mM ammonium acetate pH 3, 0.2 mM sodium acetate in 50:50 acetonitrile/water	Desialylation prior to analysis	[117]
RNase B, human milk bile salt-stimulated lipase	None	CEC	MS	Acetonitrile/water/ammonium formate mobile phase	MS/MS characterization	[114]
RNase B	2-AB	CEC	LIF 325 nm	Acetonitrile/water/ammonium formate mobile phase		[111]
α1-Acid glycoprotein, ovalbumin	2-AB	CEC	UV 210 nm	Acetonitrile/water/ammonium formate mobile phase, sulfated β-CD		[116]

ANTS 2-aminonaphthalene trisulfonic acid, GCE capillary gel electrophoresis, MEKC micellar electrokinetic chromatography, FACE fluorescence-assisted carbohydrate electrophoresis, CD cyclodextrin, CE capillary electrophoresis, LIF laser-induced fluorescence, MALDI matrix-assisted laser desorption/ionization, MS mass spectrometry, Tris tris(hydroxymethyl)aminomethane, PEO poly(etheylene oxide), PEG poly(ethylene glycol), 3-AA 3-aminobenzoic acid, SDS sodium dodecyl sulfate, TEA tetraethylammonium, SBE sulfobutyl ether, EACA ε-aminocaproic acid, HEPES N-(2-hydroxyethyl)piperazine-N′-ethanesulfonic acid, EOF electroosmotic flow

a12% solution of acrylamide/bisacrylamide (19:1) polymerized with ammonium persulfate and N,N,N′,N′-tetramethylethylenediamine

bMolecular weight not stated

Fig. 3

Separation of 1-aminopyrene-3,6,8-trisulfonic acid labeled glycans on a microfluidic device in 1 mM phosphate and 20 mM N-(2-hydroxyethyl)piperazine-N′-ethanesulfonic acid pH 6.8. Glycans were released from a blood sample of a stage IV breast cancer patient. (Taken from [103] with permission)

Some typical methods and applications of electromigrative separation techniques for pan class="Chemical">oligosaccharide analysis

ANTS n class="Chemical">2-aminonaphthalene trisulfonic acid, GCE capillary gel electrophoresis, MEKC micellar electrokinetic chromatography, FACE fluorescence-assisted carbohydrate electrophoresis, CD cyclodextrin, CE capillary electrophoresis, LIF laser-induced fluorescence, MALDI matrix-assisted laser desorption/ionization, MS mass spectrometry, Tris tris(hydroxymethyl)aminomethane, PEO poly(etheylene oxide), PEG poly(ethylene glycol), 3-AA 3-aminobenzoic acid, SDS sodium dodecyl sulfate, TEA tetraethylammonium, SBE sulfobutyl ether, EACA ε-aminocaproic acid, HEPES N-(2-hydroxyethyl)piperazine-N′-ethanesulfonic acid, EOF electroosmotic flow

a12% solution of n class="Chemical">acrylamide/bisacrylamide (19:1) polymerized with ammonium persulfate and N,N,N′,N′-tetramethylethylenediamine

Separation of n class="Chemical">1-aminopyrene-3,6,8-trisulfonic acid labeled glycans on a microfluidic device in 1 mM phosphate and 20 mM N-(2-hydroxyethyl)piperazine-N′-ethanesulfonic acid pH 6.8. Glycans were released from a blood sample of a stage IV breast cancer patient. (Taken from [103] with permission)

Most work using electromigrative separation techniques has focused on the identification of pan class="Chemical">glycans. However, CE has also been used to semiquantitatively compare pan class="Chemical">glycan peak area ratios in CE-MS [104].

Several strategies for pan class="Chemical">glycan and n>n class="Chemical">oligosaccharide analysis using electromigrative separation techniques have been presented in the literature, differing in their way to achieve separation:

Direct analysis: High-pH BGEs are applied to achieve the dissociation of the n class="Chemical">oligosaccharide hydroxyl groups to obtain electrophoretic mobility for the glycans. Alternatively, a focus on sialylated and phosphorylated glycans is possible; the neutral glycans are then only transported by electroosmotic flow and are not further separated. The analysis of nonlabeled glycans is possible using direct UV detection at a very low wavelength [118] or indirect detection with appropriate probes added to the BGE [118-121]. Also MS [104, 122] and electrochemical detection [123] can be applied.

Introduction of charged carriers: Several n class="Chemical">metal acids have been shown to complex with vicinal diol groups mainly via cis-diols, but also via trans-diols [106, 107], and thus they introduce a charge on the glycan. Borate or boronic acids are mostly used [124, 125]. These complexing agents can also be added to the BGE at lower concentration to enhance resolution by changing the separation selectivity, when labels are applied [36, 109, 110, 126]. MEKC can in principle be used for the analysis of unlabeled glycans; however, owing to detection restrictions, it has mainly been used for the separation of labeled glycans (neutral labels were applied such as 2-aminoacridone [98, 127–129] and 2-AB) by charged cyclodextrins as separation carriers [98].

Introduction of labels: n class="Chemical">Glycan labeling mainly has two functions in electrophoretic sepan>ration techniques: On the one hand, labels enable or facilitate fluorescence or MS detection; on the other hand, they enhance or in the case of neutral glycans allow the separation by introducing a charge on the glycans, thus allowing electrophoretic mobility. We can distinguish between neutral tags (only applied for detection purposes), cationic tags, and anionic tags.

Neutral tags are only rarely applied for electromigrative separation techniques as the electrophoretic mobility has then to be achieved by other means; only sialylated n class="Chemical">glycans may be considered, or alternatively MEKC using charged micellar carriers may be applied. Examples are the use of 2-AB [98] or 9-fluorenylmethylchloroformate on the amine function after release [130]. Several cationic labels have been applied for the analysis of monosaccharides, such as 6-aminoquinoline [131, 132], dansylhydrazine [133], benzoylhydrazine [134], aminopyridine [131], and aminoacridone [127-129]. Their use for complex glycans containing sialic acids is not recommended, as it would be difficult to have all glycans with an observed electrophoretic mobility towards the detector: neutral glycans (regarding only the glycan core) will be positively charged, whereas for sialylated glycans an overall cationic charge cannot always be achieved, leading to a mixture of cations and anions to be separated and transported towards the detector. Most work regarding the analysis of glycans with electromigrative separation techniques has thus been done using anionic labels, with APTS, ANTS, 3-aminobenzoic acid, and 2-AA most frequently applied (see Table 2). APTS, with three charged sulfonic acid groups, can be used over a large pH range, whereas for the analysis of aminobenzoic acid labeled glycans containing sialic acids a more basic pH is recommended to achieve an overall negative charge for all glycans.

Chromatographic separation

Chromatographic separation of n class="Chemical">glycans may be performed by adsorption chromatography, which is mostly done in the HPLC mode, by gel permeation chromatography (size-exclusion chromatography [148]), or by (capillary) gas chromatography [85, 149]. The latter technique is used for the analysis of monosaccharides in glycoconjugate composition analysis [149] or linkage analysis [85]. This section is restricted to adsorption chromatography for glycan analysis, as most of the recent chromatographic developments in glycan analysis have occurred in this field. Moreover, the focus will be on HPLC separations, and other, mostly older adsorption chromatographic techniques will be omitted, such as paper chromatography and thin layer chromatography of monosaccharides combined with radioactive detection using reductive labeling of the reducing end with tritium [150, 151].

Hydrophilic interaction liquid chromatography

HPLC-mode HILIC is a widely applied technique for n class="Chemical">oligosaccharide sepan>ration [152-154]. The most commonly used stationary phases comprise amine-bonded silica, amide-bonded silica, and ZIC HILIC phases [31, 152–154]. Also, diol phases are widely used [155]. Hydrogen bonding is often the major retention mechanism.

To be used in a pure HILIC mode (without anion exchange present), n class="Chemical">amine-bonded phases require rather high ionic strengths, which lead to the suppression of ionic interactions of acidic groups on the glycan such as sulfate and carboxyl groups of sialic acids with the ammonium groups of the stationary phase. Typically, volatile buffers such as acetic acid/triethylamine are applied at concentrations of up to 200 mM [156]. The use of amine-bonded phases at lower ionic strength results in a mixed-mode HILIC/anion-exchange separation, which is discussed later.

With ZIC-HILIC, where n class="Chemical">silica beads or n>n class="Chemical">polymer beads are functionalized with zwitterionic sulfobetaine groups, the retention properties of sialylated PA-labeled glycans change when 20 mM ammonium acetate is used instead of 5 mM ammonium acetate in the solvent, whereas the retention properties of neutral glycans are not influenced, pointing to a combination of ionic and nonionic interactions on these (mixed-mode) phases [31].

With n class="Chemical">amide and n>n class="Chemical">diol phases, ionic interactions play only a minor role and are mainly caused by the remaining bare silica groups of the carrier material. Therefore, these phases may be used in pure HILIC mode also at low salt concentrations such as 50 mM ammonium formate, pH 4.4 [29]. Typical equilibration conditions in HILIC HPLC of monosaccharides and oligosaccharides are 10–25% water in acetonitrile with a low concentration of acid or salt (mostly below 100 mM). Elution is accomplished by a gradient which increases the aqueous fraction of the mobile phase to typically 50%.

To allow for sensitive detection in HILIC, n class="Chemical">glycans are almost always labeled with a chromophore or a fluorophore. The most commonly used labels are PA [93], 2-AB [29], and 2-AA [34], but other tags such as 3-(acetylamino)-6-aminoacridine [157] have also been used. As most of these labels have hydrophobic characteristics, the derivatized glycans show slightly less retention than native, unlabeled glycans. Fluorescence detection is mostly performed using detectors equipped with a xenon lamp and both excitation and emission monochromators can be set to the optimal wavelengths of the chosen label to achieve high sensitivity.

HILIC is sometimes referred to as “size separation”, owing to the correlation between n class="Chemical">glycan size and its retention time. However, the contribution of added monosaccharides to oligosaccharide retention may vary considerably, depending on the composition of the sugars of the glycan. Generally speaking, hexoses tend to give a larger (increase of) retention than N-acetylhexosamines of deoxyhexoses (fucoses) [23, 29]. HILIC also has a considerable potential to separate structural isomers [158-162]. For example, core-fucosylated biantennary monogalactosylated N-glycans which carry the galactose on the 6-antenna (isomer 1) or 3-antenna (isomer 2) are partially separated by HILIC after labeling with 3-(acetylamino)-6-aminoacridine [157].

HILIC separations with fluorescence detection can be performed in a very robust manner. Fluctuations in retention times can be compensated by performing a standardization of elution properties using a n class="Chemical">glucose ladder (partial dextran hydrolysate). The time axis may then be normalized to an axis of glucose units (GUs), relating the oligosaccharide migration properties to the elution positions of these glucose oligomers [29]. Rudd and coworkers have established a database (GlycoBase and autoGU) which allows the structural assignment of 2-AB-labeled oligosaccharides on the basis of migration positions on a TSK-amide-80 column. In this database, GUs are listed for 2-AB-labeled glycans before and after cleavage by exoglycosidases [29, 163]. Recently, the use of smaller (3 μm instead of 5 μm) amide-coated HILIC particles has led to a marked reduction of analysis times [29, 157], which makes HILIC in combination with fluorescence detection a suitable method for intermediate- to high-throughput glycosylation analysis [29, 164].

A detailed overview of glycosylation analysis by HILIC with mass-spectrometric detection has recently been provided [152]. Mass-spectrometric detection of both labeled and unlabeled n class="Chemical">glycans is compatible with HILIC sepan>ration, particularly when amide or diol phases are used, owing to the low concentrations of acid or volatile salt combined with the relatively high percentages of acetonitrile, which is beneficial for ESI [152, 155]. To allow high-sensitivity detection, HILIC separation in combination with ESI-MS is often performed in miniaturized form down to the nanoscale [152, 159, 160, 165], allowing the detection of low femtomole amounts of glycan (absolute amount injected) in both native [160] and 2-AB-labeled form (Fig. 4) [159]. Similar to HILIC with fluorescence detection, HILIC with nano-ESI–ion trap–MS can make use of GUs when a 2-AB-labeled dextran ladder is applied as an internal standard. In this case, however, the primary information for glycan identification and structural elucidation is glycan mass and tandem MS data, and the GUs have a supporting role [159]. Alternatively, HILIC fractions may be analyzed by with MALDI-TOF(/TOF)-MS(/MS) detection, which may be combined with high-energy fragmentation of sodium adducts [161, 162]. HILIC-MS is particularly useful for the in-depth analysis of complex oligosaccharide mixtures owing to its potential to separate glycans of different structures and identify isomers [158-162]. The proven usefulness of HILIC-MS for the analysis of complex oligosaccharide mixtures [156-160] will surely lead to its widespread application in the future.

Fig. 4

Subfemtomole sensitivity of nanoscale liquid chromatography (LC)–electrospray ionization (ESI)–mass spectrometry (MS) in the analysis of a 2-aminobenzamide (2-AB)-labeled hexamannosidic N-glycan (Man6GlcNAc2). A 2-AB-labeled hexamannosidic N-glycan was analyzed using nanoscale hydrophilic interaction LC (HILIC)–ESI–ion trap–MS. Base-peak chromatograms of a dilution series show that the detection of as little as 2 fmol of 2-AB-tagged Man6GlcNAc2 injected is possible (A). Sum mass spectra of the elution range of Man6GlcNAc2 (25.2–26 min; B–E) revealed the detection of proton adducts (m/z 1,517) and sodium adducts (m/z 1,539) down to 0.5 fmol of injected standard (E). Combined selected ion chromatograms for m/z 1,517 and m/z 1,539 allowed the detection of the standard after injection of a 2-fmol as well as a 0.5-fmol aliquot (inset in A). (Reproduced from [159] with permission)

Subfemtomole sensitivity of nanoscale liquid chromatography (LC)–electrospray n class="Disease">ionization (ESI)–mass spectrometry (MS) in the analysis of a 2-aminobenzamide (2-AB)-labeled hexamannosidic N-glycan (Man6GlcNAc2). A 2-AB-labeled hexamannosidic N-glycan was analyzed using nanoscale hydrophilic interaction LC (HILIC)–ESI–ion trap–MS. Base-peak chromatograms of a dilution series show that the detection of as little as 2 fmol of 2-AB-tagged Man6GlcNAc2 injected is possible (A). Sum mass spectra of the elution range of Man6GlcNAc2 (25.2–26 min; B–E) revealed the detection of proton adducts (m/z 1,517) and sodium adducts (m/z 1,539) down to 0.5 fmol of injected standard (E). Combined selected ion chromatograms for m/z 1,517 and m/z 1,539 allowed the detection of the standard after injection of a 2-fmol as well as a 0.5-fmol aliquot (inset in A). (Reproduced from [159] with permission)

Mixed-mode HILIC/anion exchange separation

Some authors have chosen to combine ionic interaction with hydrophilic interaction in mixed-mode HILIC/anion exchange separations of n class="Chemical">2-AA-labeled glycans [74, 166]. These separations are performed on amine-bonded columns, which owing to (partial) protonation exhibit anion-exchange properties [74], or on a strong anion exchange HPLC column functionalized with quaternary ammonium groups [166]. The contribution of ionic interactions of both the tag and the glycan can be modulated by changing the ionic strength of the eluents (see “Hydrophilic interaction liquid chromatography”), whereas hydrophilic interactions (hydrogen bonding) with the stationary phase are influenced by the water content of the eluents. By carefully tuning the two interaction modes, optimized gradients result in the separation of glycan groups that differ in charge (Fig. 5). Within each charge group, separation is accomplished on the basis of HILIC. The separations obtained for glycans with different degrees of sialylation resemble somewhat those obtained by high-pH anion-exchange chromatography (HPAEC) of unlabeled glycans [74].

Fig. 5

Mixed-mode HILIC/anion exchange separation of α1-acid glycoprotein oligosaccharides before (a) and after (b) desialylation. S1−S5 refer to the number of sialic acid residues present in the oligosaccharides. Bi, Tri, Tri + F, Tetra, and Tetra + F refer to biantennary, triantennary, fucosylated triantennary, tetraantennary, and fucosylated tetraantennary N-linked oligosaccharides, respectively. (Reproduced from [166] from with permission)

Mixed-mode HILIC/anion exchange separation of α1-acid glycoprotein n class="Chemical">oligosaccharides before (a) and after (b) desialylation. S1−S5 refer to the number of sialic acid residues present in the oligosaccharides. Bi, Tri, Tri + F, Tetra, and Tetra + F refer to biantennary, triantennary, fucosylated triantennary, tetraantennary, and fucosylated tetraantennary N-linked oligosaccharides, respectively. (Reproduced from [166] from with permission)

Anion-exchange chromatography

Many n class="Chemical">glycan fractionation schemes include prepan>rative anion-exchange chromatography with fluorescence detection of glycans labeled with PA or 2-AB [92, 93]. Anion-exchange chromatography of glycans is typically performed at neutral to slightly alkaline pH. Under these conditions, the charge of most glycans is determined by the presence of carboxylic acids, sialic acids, glucoronic acids, sulfates, and phosphates. The separation is based on the (negative) charge of the glycans determined by these substituents. Elution is often accomplished by a salt gradient, which hinders the combination with mass-spectrometric detection. Anion-exchange chromatography may be followed by HILIC separation of the charged groups obtained after desialylation to the simplify elution patterns [167].

High-pH anion-exchange chromatography

In contrast to classic anion-exchange chromatography, Hn class="Chemical">PAEC is performed at a pH of approximately 13. Under these conditions, hydroxyl groups on glycans are partially deprotonated, resulting in a partial negative charge, which is then used for the separation of the glycans. Glycans with a reduced end exhibit less retention than reducing-end glycans, as they lack the anomeric hydroxyl group which is a major contributor to the partial negative charge. Usually electrochemical detection (pulsed amperometric detection, PAD) is applied for the analysis after HPAEC separation. HPAEC is suitable for the separation of nonderivatized glycans as well as glycans with various types of labels and modifications.

Kotani and Takaski [168] reported the analysis of n class="Chemical">N-linked oligosaccharides released from various glycoproteins labeled with 2-AB using HPAEC with PAD followed by in-line neutralization of the eluent with an anion micromembrane suppressor to allow for fluorescence detection. In their hands, high pH led to quenching of the fluorescence intensity, which made postcolumn neutralization necessary. Moreover, they observed a better chromatographic resolution for 2-AB-labeled asialooligosaccharides released from human α1-acid glycoprotein by HPAEC than by HILIC (Fig. 6).

Fig. 6

Analysis of N-linked oligosaccharides from human α1-acid glycoprotein. 2-AB-labeled oligosaccharides obtained were analyzed by high-pH anion-exchange chromatography with fluorescence detection (a) or high-performance LC (HPLC) with an amide-80 column and fluorescence detection (b). (Reproduced from [168] with permission)

Analysis of n class="Chemical">N-linked oligosaccharides from human α1-acid glycoprotein. 2-AB-labeled oligosaccharides obtained were analyzed by high-pH anion-exchange chromatography with fluorescence detection (a) or high-performance LC (HPLC) with an amide-80 column and fluorescence detection (b). (Reproduced from [168] with permission)

Ridley et al. [169] reported a method for n class="Chemical">biotin labeling of biologically active oligogalacturonides using a stable hydrazide linkage after first creating the water-instable hydrazone derivative. With use of HPAEC-PAD, optimization of the reaction conditions was monitored, product yields were determined, and a subsequent stability test was performed. It could be concluded that the yield of the oligogalacturonide-biotin hydrazide derivatives is dependent on the size of the oligogalacturonide.

Stubbs et al. [170] described a semipreparative purification of n class="Species">tetraantennary oligosaccharides from human α1-acid glycoprotein. Six tert-butoxycarbonyl-l-tyrosine oligosaccharide derivatives were purified and the subsequent labeling process was monitored by HPAEC-PAD. The chromatographic resolution of tert-butoxycarbonyl-l-tyrosine derivatives of the oligosaccharides with HPAEC-PAD was comparable to that of the free oligosaccharides. Closely related to this publication [170] is the work by Collard et al. [171], in which HPAEC-PAD was applied to monitor a time course of the elimination of the tert-butoxycarbonyl (BOC) group from a BOC-tyrosinamide-labeled triantennary N-glycan, followed by reductive alkylation/formylation resulting in dimethylation of the tyrosinamide moiety.

PGC chromatography

PGC stationary phases are often used for the separation of n class="Chemical">oligosaccharide alditols, fluorescently labeled glycans, and even permethylated glycans [66], as reviewed recently [84]. Retention is mediated by a combination of predominantly ionic and hydrophobic interactions [84], and elution is often achieved by a gradient of organic solvents with addition of small amounts of volatile salts, acids, or bases, making PGC of oligosaccharides compatible with mass-spectrometric detection [84].

Both small and large n class="Chemical">oligosaccharides show retention on PGC. Moreover, glycans with a reducing-end tag as well as native glycans may be applied. PGC is the separation method of choice for direct liquid chromatography (LC)–MS analysis of O-glycans which have been released by reductive β-elimination, as these glycans are often rather small and do not contain a reducing end for labeling [172, 173]. Next to native or reduced glycans, fluorescently labeled glycans have often been analyzed using PGC [84]. The fluorescent labels contribute to the retention of glycans on PGC: PA, which is a label with only modest retention in PGC, results in superb PGC separations of labeled glycans, whereas derivatization with a label such as 2-AB, which has pronounced influence on glycan retention on PGC, results in inferior resolution [174]. Notably, PGC is very efficient in separating structural isomers. Retention times in combination with glycan mass analysis are often sufficient for structural assignment [175, 176].

RP chromatography

The aspect of hydrophobic interactions between (labeled) n class="Chemical">oligosaccharides and the stationary phase is common for both PGC and RP sepan>rations on C18 phases. In contrast to PGC separation, however, RP-HPLC of oligosaccharides requires derivatization, because the retention of underivatized glycans is often insufficient [177]. For labeled glycans, the retention properties are determined by a combination of the hydrophobic properties of the tag and the contribution of monosaccharide residues [75]. The effect of the addition of monosaccharides on the retention of a labeled glycan may differ depending on the tag: N-glycans labeled with PA, which is a low-retention tag, showed increasing retention with a higher degree of antenna galactosylation, whereas the same set of N-glycans labeled with 2-aminobenzoic acid ethyl ester showed decreasing retention with a higher degree of antenna galactosylation [75].

For fluorescence detection in RP-HPLC, the most commonly applied tags are n class="Chemical">PA [93, 178] and 2-AB [179, 180]. Together with HILIC and anion-exchange chromatography, RP-HPLC with fluorescence detection is used in multidimensional mapping strategies for structural assignment of PA-labeled N-glycans [93].

Next to fluorescence detection, RP-HPLC is often combined with online ESI-MS analysis, which has been shown for n class="Chemical">glycans labeled with various tags such as PMP, phenylhydrazine, and the biotin label BACH [55, 78, 181, 182]. Moreover, both 2-AB-labeled and 2-AA-labeled N-glycans can be analyzed by RP-nanoLC-MS/MS, and separations of structural isomers have been demonstrated [83, 179, 180, 183]. Chen and Flynn [180] have impressively demonstrated the separation power of RP-HPLC of 2-AB-labeled glycans, and have combined this with both positive-mode and negative-mode multistage tandem MS on an ion trap mass spectrometer for structural assignment (Fig. 7).

Fig. 7

Reverse-phase HPLC with fluorescence detection of 2-AB-labeled glycans released from a 10 μg RNase B, b 30 μg ovalbumin, and c 30 μg fetuin. The structures of the labeled oligosaccharide peaks are shown in d. Species that were coeluted in the same fluorescence peak are indicated by letters a and b. The peaks corresponding to the species that were eluted early (less than 20 min) containing two or more sialic acids are not shown. Circles mannose, squares GlcNAc, diamonds galactose, triangles fucose, stars sialic acid, dashed lines α linkage, solid lines β linkage, vertical lines 1–2 linkage, horizontal lines 1–4 linkage, forward slashes 1–3 linkage, backslashes 1–6 linkage; wavy lines unknown linkage. (Reproduced from [180] with permission)

Reverse-phase HPLC with fluorescence detection of n class="Chemical">2-AB-labeled glycans released from a 10 μg RNase B, b 30 μg ovalbumin, and c 30 μg fetuin. The structures of the labeled oligosaccharide peaks are shown in d. Species that were coeluted in the same fluorescence peak are indicated by letters a and b. The peaks corresponding to the species that were eluted early (less than 20 min) containing two or more sialic acids are not shown. Circles mannose, squares GlcNAc, diamonds galactose, triangles fucose, stars sialic acid, dashed lines α linkage, solid lines β linkage, vertical lines 1–2 linkage, horizontal lines 1–4 linkage, forward slashes 1–3 linkage, backslashes 1–6 linkage; wavy lines unknown linkage. (Reproduced from [180] with permission)

Alternatively, nanoscale RP-HPLC-MS/MS of labeled n class="Chemical">glycans may be performed without fluorescence detection. A major advantage of this approach is that the necessary analytical equipment is available in many proteomics and metabolomics laboratories: columns (nano-RP C18) as well as solvents (water/acetonitrile mixtures containing typically 0.1% of formic acid) which are used for the LC-MS analysis of complex peptide mixtures can be directly used for the analysis of 2-AB-labeled [83, 183] and 2-AA-labeled glycans (unpublished results) without any adjustment.

Permethylated n class="Chemical">glycans may likewise be analyzed by RP-HPLC-MS. Structural isomers of permethylated glycans are separated using this approach [184]. This method in particular has potential for in-depth structural characterization of glycans by tandem MS of sodium adducts, which has hitherto predominantly been applied without a preceding separation [63].

A comparative study analyzing n class="Chemical">PMP- and ANTS-labeled glycans was performed by Saba et al. [78], where the ANTS labeling was accomplished by reductive amination. Overall, PMP-modified oligosaccharides yielded better normal and RP separation and improved sensitivity than the ANTS-labeled sugars for LC-ESI-MS analysis [78]. This approach could facilitate the structural investigation of various oligosaccharides in the future.

Mass spectrometry

Glycan ionization and detection

Both ESI-MS and MALDI-MS are often used for mass-spectrometric analysis of n class="Chemical">glycans. ESI of glycans is most often used in-line with HPLC or CE (see “Separation and detection”), which may be used for quantification in combination with (isotope) labeling (see “Comparative glycomics by MS”). Here, off-line ESI-MS and MALDI-MS of glycans are discussed with a focus on derivatization techniques.

The n class="Disease">ionization efficacies of oligosaccharides are markedly influenced by charged substituents of the glycan such as carboxyl groups of sialic acid or glucoronic acid and sulfate groups, which promote negative-mode ionization. Moreover, derivatization influences the ionization efficacies by introducing additional charges. Glycans with negatively charged substituents are more efficiently ionized in negative-ion mode than their neutral counterparts, whereas native as well as labeled glycans lacking acidic substituents are predominantly analyzed using positive-mode ionization [185]. Notably, the influence of charged substituents on ionization efficacies is much more pronounced in MALDI than in ESI. In addition, derivatization often gives the oligosaccharide a more hydrophobic character, which usually increases ESI efficacies. Next to their pronounced effect on ionization, labels influence the fragmentation behavior of glycans and may help with the assignment of fragmentation spectra by tagging the reducing end.

Off-line ESI-MS

Off-line ESI-MS of n class="Chemical">glycans is performed on both native and permethylated glycans. Off-line ESI-MS of native glycans is mostly applied for structural analysis by tandem MS and is possible in both negative-ion and positive-ion mode.

In positive-ion mode, some n class="Chemical">sodium salt is usually added to the spray solvent consisting typically of a water/methanol mixture containing a volatile acid (formic acid or acetic acid) [186]. The sodium ions suppress the formation of proton adducts. The resulting sodium adducts are more stable than proton adducts and less prone to in-source decay during ion transfer from atmospheric pressure to a vacuum. Thus, a better sensitivity and less complex structures are obtained. Moreover, whereas tandem MS of proton adducts by CID usually exclusively results in the fragmentation of glycosidic bonds, CID of sodium adducts additionally results in cross-ring cleavages providing linkage information [186]. Negative-mode ionization and fragmentation has been applied by Pfenninger et al. [187, 188] and more recently by Harvey [189-191], who optimized the off-line ESI conditions, resulting in the registration of (multiple) deprotonated species and/or anion adducts (phosphate, nitrate, or chloride). Tandem MS of negatively charged oligosaccharide ion species usually provides specific cross-ring cleavages allowing structural elucidation.

Notably, fragmentation of n class="Chemical">sodium adducts and deprotonated species of specific glycans result in very different patterns of cross-ring cleavages [192]. Negative-mode tandem MS of oligosaccharides is characterized by a considerable stability of fucose glycosidic linkages, in contrast to positive-mode tandem MS, where fucose bonds are labile [192].

The most commonly applied labeling technique for off-line positive-mode ESI is permethylation. Compared with native n class="Chemical">glycans, permethylated glycans generally give higher MS signals. Moreover, permethylation allows purification/desalting of the glycans by liquid–liquid extraction or RP-SPE (Table 1). Tandem mass spectra of sodium as well as other alkali ion adducts of permethylated glycans provide very informative tandem MS spectra: the methyl substitution pattern allows the discrimination between terminal, internal, and branching monosaccharide residues. Cross-ring cleavages are extensive, providing linkage information. The mass spectrometer of choice is the ion trap, which allows multiple ion isolation/fragmentation cycles for in-depth structural characterization. The power of this approach was demonstrated by Prien et al. [63] by characterizing isomers of RNase B N-glycans, some of which were described for the first time.

Matrix-assisted laser desorption/ionization MS

In contrast to ESI-MS, which is often used online with separation techniques, MALDI-MS of n class="Chemical">glycans is predominantly used as a stand-alone technique. MALDI-MS of native glycans is mostly performed in positive-ion mode using 2,5-dihydroxybenzoic acid (DHB) as the matrix substance, resulting in the registration of sodium adducts. Negative-mode detection of neutral native glycans, in contrast, is difficult to achieve and may require specific matrices and additives [192].

Permethylation is often used in combination with MALDI-TOF-MS detection, resulting in the very sensitive detection of n class="Chemical">glycans, mostly as sodium adducts [22, 72, 85, 193]. Permethylation transforms the carboxyl groups of sialic acid residues into methyl esters, which are far less labile than the underivatized sialic acid groups, thereby allowing the MALDI-TOF-MS analysis of glycans without loss of sialic acids by in-source and metastable decay [22].

Another labeling method which is used in combination with MALDI-TOF-MS analysis of n class="Chemical">glycans is the derivatization with carboxymethyl trimethylammonium hydrazide (Girard’s reagent T) [60]. This label induces a permanent positive charge at the reducing end and thereby allows very efficient generation of glycan ions. Labeling of glycans by reductive amination has several consequences for MALDI: the (secondary) aromatic amine group introduced in this reaction (see Fig. 2a) makes glycans labeled with PA, 2-AB, and 2-AA readily protonable. Thus, MALDI-MS of these glycans often results in the detection of proton adducts next to sodium adducts. With regard to negative-mode MALDI, the 2-AA tag—owing to its carboxyl group—makes neutral glycan structures readily ionizable, thereby allowing the joint registration of sialylated and nonsialylated glycans in one MALDI spectrum [34]. When sialylated glycans are analyzed, reflectron-mode MALDI-TOF-MS often shows partial or complete loss of sialic acids, which is due to in-source decay and metastable decay. Loss of sialic acids is somewhat less pronounced in negative-ion mode. Moreover, a reduction of decay problems may be achieved by applying alternative matrices such as 2,4,6-trihydroxyacetophenone, which is colder than DHB [194]. In contrast, a hot matrix such as α-cyano-4-hydroxycinnamic acid leads to a more pronounced desialylation. Notably, loss of sialic acid is hardly seen when MALDI-TOF-MS is performed in linear mode [34]: metastable decay still occurs under these conditions, but the resulting fragments are not visible. Acceleration starts immediately after ionization/desorption, and fragment ions arising thereafter in the field-free region will not be resolved.

Although MALDI-TOF-MS instruments generally require a source pressure in the range of 10-6 mbar, MALDI with other MS detectors may alternatively be performed at intermediate pressures (typically submillibar range). Under such conditions, the loss of n class="Chemical">sialic acids is suppressed: using DHB as a matrix, intermediate-pressure MALDI–Fourier transform ion cyclotron resonance (FTICR)–MS allows the high-resolution analysis of both sialylated and nonsialylated, 2-AA-labeled N-glycans from human plasma with virtually no in-source decay (Fig. 8). Our results show that loss of sialic acids is avoided by collisional cooling of ions in the ion source at intermediate-pressure conditions. Moreover, compared with MALDI-TOF-MS, relatively low extraction voltages are applied in the ion source.

Fig. 8

Analysis of 2-AA-labeled total plasma N-glycans by matrix-assisted laser desorption/ionization (MALDI)–Fourier transform ion cyclotron resonance (FTICR)–MS. Samples were prepared as described previously [34], desalted by porous graphitized carbon solid-phase extraction, and analyzed by MALDI-FTICR-MS using a 2,5-dihydroxybenzoic acid matrix. The low-mass range (top) and the high-mass range (bottom) were measured using different ion-transfer times. The inset shows the isotope pattern of registered glycan species. Yellow circles galactose, green circles mannose, blue squares N-acetylglucosamine, purple diamonds sialic acid, red triangles fucose

Analysis of n class="Chemical">2-AA-labeled total plasma N-glycans by matrix-assisted laser desorption/ionization (MALDI)–Fourier transform ion cyclotron resonance (FTICR)–MS. Samples were prepared as described previously [34], desalted by porous graphitized carbon solid-phase extraction, and analyzed by MALDI-FTICR-MS using a 2,5-dihydroxybenzoic acid matrix. The low-mass range (top) and the high-mass range (bottom) were measured using different ion-transfer times. The inset shows the isotope pattern of registered glycan species. Yellow circles galactose, green circles mannose, blue squares N-acetylglucosamine, purple diamonds sialic acid, red triangles fucose

Comparative glycomics by MS

Most often, relative quantification of glycoforms within one sample is achieved using MS (with or without preceding separation) or by LC or CE with fluorescence detection (see “Separation and detection”). Comparison of a large number of n class="Chemical">glycan samples by mass-spectrometric analysis may be compromised by changes in the performance of the mass spectrometer over time, and also because of the large number of sample prepan>ration steps necessary, possibly introducing unwanted bias, e.g., loss of sialic acids. Especially the labeling step itself can be problematic with respect to labeling efficiency, interference by matrix components, or the subsequent purification step. We have recently established a high-throughput method for glycosylation profiling of the total plasma N-glycome by negative linear-mode MALDI-TOF-MS after glycan release and 2-AA labeling. Similarly, N-glycosylation profiling can be performed with permethylated glycans, which has the advantage that sialic acid groups are stabilized by methyl ester formation [22, 69–71].

In proteomics approaches, labeling with isotopic or isobaric tags is often employed to obtain good quantification results [195]. Some research groups have now started to incorporate the idea of isotopic [40–44, 196–198] as well as isobaric [61, 91] labeling also for glycomics analysis (see also “Reductive amination”).

Isotopic derivatives share the same atomic composition, but have different masses owing to the introduction of heavy isotopes, most often D and n class="Chemical">13C. Several reports of use of this approach for comparative glycomics have been published: Many of the isotopic derivatives, such as [H4]PA versus [D4]PA [40], [H4]2-AA versus [D4]2-AA [41], and [12C6]alanine versus [13C6]alanine [43, 44], are introduced by reductive amination (see “Reductive amination”). The PA-labeled monosaccharides were analyzed by PGC-LC-MS, and the observed relative standard deviations (RSDs) were less than 7.2% [40]. Derivatization of a dextran ladder with aniline and subsequent analysis using HILIC-LC-MS resulted in RSDs below 10% for Hex3-Hex5. Larger oligosaccharides had larger RSDs [44]. In a second study, an RSD of 4.85% was observed for lacto-N-neotetraose derivatized with aniline followed by HILIC-LC-MS analysis with a large dynamic range [43].

The incorporation of an isotopic tag by permethylation has been described by Alvarez-Manilla et al. [196]. n class="Chemical">Oligosaccharides are permethylated using either 12[C]H3I or 13[C]H3I, resulting in a 1 Da mass difference per permethylation site. Derivatization of Hex3-Hex5, followed by MALDI-TOF-MS analysis revealed an average RSD of 12.7% over a linear dynamic range of 2 orders of magnitude. Differentially labeled glycans from α1-acid glycoprotein were mixed 1:1, resulting in an average RSD for seven glycoforms of 6%.

However, these approaches only allow for the comparison of one sample pair at a time, in contrast to proteomics labeling techniques such as iTRAQ enabling the comparison of up to eight samples [199]. Recently, Bowman and Zaia [197] synthesized different tags on the basis of n class="Chemical">2-aminobenzoic acid applicable to reductive amination, which are suitable for the direct comparison of four samples which, based on the incorporation of deuterium versus hydrogen atoms, give rise to an isotopic variety with a mass difference of 4 Da between the glycans from different samples. Upon analysis by ESI–quadrupole TOF–MS, the RSDs were below 10% for compounds with a ratio of more than 1:3 between the differentially labeled glycans. These tags are, however, not compatible with LC separation, owing to the large number of deuterium atoms, resulting in retention time shifts.

The previously described labeling techniques are all based on the same principle: introduction of an isotopic tag in vitro. Recently, Orlando et al. [198] reported on the use of an in vivo metabolic isotopic labeling approach using aminon class="Chemical">sugars containing 15N-glutamine. All GlcNAc, GalNAc, and sialic acids become labeled with 15N, resulting in a mass increase of 1 Da. With use of this approach, differentially labeled cell glycans can be mixed prior to all sample preparation procedures, thus reducing the risk of bias due to sample handling.

Isobaric derivatives have the same nominal mass, whereas the accurate mass is different. An example is the derivatization via permethylation using either n class="Chemical">13CH3I or 12CH2DI, resulting in a mass difference (Δm) of 0.003 Da per permethylation site as applied. This approach, called “quantification by isobaric labeling”, has been described recently for comparative glycomics of both N-glycans and O-glycans [61, 91]. All glycans have multiple methylation sites and, owing to the multiplication of the mass-shift, mass differences for the discrimination of differentially labeled glycan pairs to be analyzed using high-resolution mass spectrometers (e.g., Fourier transform MS) are obtained.

Microarrays

Although most of the methods discussed in this review deal with n class="Chemical">glycan labeling and analysis for identification, purification, and structural characterization, this section is dedicated to labeling approaches which combine structural characterization with biomolecular interaction analysis. In glycan binding assays using microarrays and microtitration plates, glycans are often immobilized, which may be achieved in a covalent or noncovalent manner. Carbohydrate-binding proteins (CBPs) such as animal or plant lectins and immunoglobulins are then applied. Fluorescence detection of attached CBPs is achieved by either directly labeling the CBPs or using fluorescently labeled secondary antibodies.

For noncovalent immobilization, Liu et al. [200] have established two types of neoglycolipid probes for n class="Chemical">glycan microarrays: glycans may be conjugated to 1,2-dihexadecyl-sn-glycero-3-phosphoethanolamine via reductive amination or to aminooxy-functionalized 1,2-dihexadecyl-sn-glycero-3-phosphoethanolamine via oxime ligation. Neoglycolipid probes are purified by silica chromatography, structurally characterized by MS, and used for preparing glycan microarrays.

Several n class="Chemical">biotin-containing tags are available for glycan labeling (see “Reductive amination” and “Hydrazide labeling”) offering the possibility to perform microtitration-plate binding assays [57, 58] as well as glycan microarray analyses combined with surface plasmon resonance detection [201]. BACH-labeled glycans have recently been shown to be suitable for detailed structural analysis by LC-MS [55], which, together with the aforementioned binding assays, offers the possibility to identify natural ligands of CBPs.

Xia et al. [80] introduced n class="Chemical">2,6-diaminopyridine, which carries two aromatic amine groups, as a versatile tag. After reductive amination, the free amine groups can be further coupled to any kind of N-hydroxysuccinimide-activated reagent, allowing immobilization on array surfaces or biotin labeling [80]. We have recently shown that glycans isolated from natural sources and labeled with fluorescent tags such as 2-AA and 2-AB using reductive amination are not only suitable for many separation techniques with fluorescence and mass-spectrometric detection (see “Separation methods”), but can also directly be used for covalent immobilization on a natural glycan microarray [202] (Fig. 9). The key to this approach is the reactivity of epoxy-activated slides which react with the secondary amine group linking the fluorescent tag with the oligosaccharide moiety, thereby allowing the oriented immobilization of fluorescently labeled glycans on microarray slides (Fig. 9d). Microarrays generated in this manner have been probed for interaction with CBPs by both fluorescence detection [202] and surface plasmon resonance [203].

Fig. 9

A natural glycan microarray approach with reductively aminated glycans. a Glycans are derivatized, b fractionated by HPLC, c analyzed by MALDI time of flight MS(/MS), d immobilized on microarray epoxide slides, e assayed for protein interaction, and f the data obtained are interpreted. (Reproduced from [202] with permission)

A natural n class="Chemical">glycan microarray approach with reductively aminated glycans. a Glycans are derivatized, b fractionated by HPLC, c analyzed by MALDI time of flight MS(/MS), d immobilized on microarray epoxide slides, e assayed for protein interaction, and f the data obtained are interpreted. (Reproduced from [202] with permission)

Discussion

In this section we will discuss some aspects regarding the choice of a pan class="Chemical">glycan label such as the introduction of changes in pan class="Chemical">glycan properties upon derivatization, sample preparation, and requirements for the analytical method.

Sample preparation

Next to detection and separation properties of a specific label, the derivatization process together with possible matrix effects also have to be taken into account when choosing a label. Some labels require optimized reaction conditions as the equilibrium is on the side of the nonlabeled n class="Chemical">glycans and the free label. This holds true for the common labeling scheme for 2-AB, which requires organic solvents as the reaction solution, and for APTS, for which only poor labeling yields may be achieved [75].

Most analytical techniques require a purification step after sample derivatization. MALDI and Hn class="Chemical">PAEC need samples with low amounts of salts, which is also the case for some electromigrative separation techniques. Acetone purification as well as paper chromatography leave the sample with quite some matrix compounds and salts; therefore, SPE methods may be preferred.

The removal of excess label is taken into account in most strategies, as problems with overload, column contamination, or quenching of signals (in MS) can occur. Hydrophilic labels are generally difficult to remove from the n class="Chemical">glycans, as their properties resemble more closely those of the glycans. An example is APTS, which is difficult to remove using HILIC and RP-SPE. Very hydrophobic labels most likely require easy-to-use RP-SPE; however, they are not compatible with many subsequent separation techniques. In addition, introduction of hydrophobic properties to the glycans can give rise to interferences with proteins and peptides in both purification and separation as these biomolecules usually show a higher hydrophobicity than the glycans. As the mechanism of binding on PGC-SPE is not fully understood, the optimization is dominated by trial and error as the adsorption and the loading capacity cannot easily be judged.

In general, with both PGC-SPE and HILIC-SPE, both labeled and unlabeled pan class="Chemical">glycans are retained and can be analyzed with appropriate analytical techniques. This is not the case in RP-SPE, where the label dominates binding and unlabeled pan class="Chemical">glycans are usually not retained.

In recent years there has been an onset of commercialization of purification strategies. More effort in this field can be expected in the coming years.

Separation methods

Most applications use separation techniques to gain information on the n class="Chemical">glycan content and to identify the glycans. Charge and hydrophobicity are major criteria in choosing a particular label. Charge plays a major role in several separation techniques, such as electromigrative separation techniques, anion-exchange chromatography, mixed-mode anion exchange/HILIC separations, and HPAEC. In CE-based separations the charge is necessary to provide the glycan with an effective electrophoretic mobility for migration. Glycan labeling with APTS and ANTS is often applied for CE: with their three sulfonic acid groups, both labels provide a nearly pH independent high anionic charge, giving rise to low analysis times. Laser-induced-fluorescence detection is applied at 488 and 325 nm, respectively [105, 108, 109, 126, 147]. Good detection limits can also be obtained by mass-spectrometric detection by taking advantage of the highly sensitive and selective negative ionization mode and the high negative charge of the labeled glycans [105]. Good results can also be obtained using 2-AA-labeled glycans with either laser-induced-fluorescence (325 or 355 nm) or ESI-MS detection in negative ionization mode using CE or CGE (see Table 2).

Hn class="Chemical">PAEC sepan>ration of glycans requires a (partial) negative charge, which may be achieved by partial deprotonation of glycan hydroxyl groups at high pH. Under these conditions, a charge-based separation of native glycans as well as glycans derivatized with a neutral label can be achieved. The introduction of labels providing an additional negative charge leads to an increase in retention times, but a change or enhancement in selectivity is not to be expected.

n class="Chemical">Glycan sepan>ration using HILIC is dominated by the physical properties of the glycan moiety. The label often has little influence on the separation. HILIC can be used as an SPE method for the purification of glycans after labeling, as small aromatic molecules such as 2-AA and 2-AB are hardly retained [34]. Notably, the APTS label, which owing to the three sulfonic acid groups has pronounced hydrophilic properties, leads to longer migration times of labeled glycans in HILIC compared with native glycans (unpublished results). In RP-HPLC native glycans are hardly retained, and retention is largely determined by the label. Separation of 2-AB-labeled N-glycans has been demonstrated with resolution of structural isomers and detection by (tandem) MS, showing the potential of RP-HPLC [180]. Separation by PGC somehow resembles RP-HPLC, yet with significant retention of native glycans and charge effects contributing to retention.

Summarizing, there are a few labels that are suitable for a large number of different applications. n class="Chemical">2-AB, for example, has been shown to be applicable for MALDI, HILIC, RP-LC, PGC sepan>ration, and HPAEC. It gives rise to reasonable signal intensities in ESI and can be used for fluorescence detection. 2-AA shows a somewhat similar broad applicability; it can, however, also be applied in electromigrative separation techniques as it introduces an anionic charge at intermediate to high pH. Moreover, in contrast to 2-AB, it can be used for MALDI-TOF-MS analysis of both neutral and sialylated glycans in negative ionization mode [34]. However, complex mixtures of N-glycans tend to be less efficiently separated by RP-HPLC in 2-AA-labeled form than in 2-AB-labeled form (unpublished observations).

Regarding the determination of labeling yields, those methods which allow the simultaneous separation and detection of nonlabeled and labeled n class="Chemical">glycans have to be considered. MS-based detection techniques as well as PAD are the few ones available. For separation, HPAEC, PGC and HILIC can be used. CE with mass-spectrometric detection will allow the analysis of sialylated glycans with and without a reducing end label, but not of the nonlabeled neutral glycans.

Optical detection

Several n class="Chemical">glycan labels are suitable for UV detection, for example, 2-AA, with an absorption maximum at 214 nm [204], and PMP, with an absorption maximum at 245 nm [205]. However, as many other biomolecules likewise absorb UV light, the specificity is generally low, and alternative detection techniques are usually preferred also to achieve better sensitivity. Fluorescence detection is the most commonly used optical detection method for glycan analysis. Whereas lamp-based fluorescence can be applied in chromatographic techniques, CE usually requires lasers as excitation sources owing to the short optical path length for detection in the capillary. Therefore, fluorescent labels have to be chosen which exhibit excitation/emission properties that match the wavelengths of common lasers, such as the argon laser at 488 nm (APTS), the He–Cd laser at 325 nm (2-AA, 2-AB), and the frequency-tripled Nd:YAG laser at 355 nm (2-AA, 2-AB) (see also Table 2).

Amperometric detection

Amperometric detection is almost exclusively used in combination with Hn class="Chemical">PAEC [206]. It enables the analysis of both labeled and unlabeled glycans. However, this detection method is not very selective, and compounds from the sample matrix such as amino acids also give rise to signals. With use of a membrane desalter, capillary-format HPAEC with amperometric detection was successfully combined with on-line ESI-MS for glycan characterization [207].

Mass-spectrometric detection

Mass-spectrometric detection of n class="Chemical">glycans by both ESI-MS and MALDI-MS is usually enhanced by glycan labeling compared with the analysis of unlabeled glycans. Both the hydrophobicity and the charge brought in by the label can be advantageous. Some tags are particularly suitable for detection in the positive ionization mode (e.g., PMP, 2-AB); others are preferably used with negative ionization mode (e.g., ANTS, APTS). Other labels such as 2-AA have been shown to give rise to acceptable signal intensities in both ionization modes [75]. Tandem MS of glycans as alkali adducts or in deprotonated form by (high-energy) CID is particularly valuable for structural characterization owing to the observed cross-ring cleavages which provide linkage information [8, 9, 22, 192]. Obviously, extensive cross-ring cleavages often lead to rather complex spectra, making spectral assignment challenging [161, 162].

Sialic acids

The analysis of sialylated n class="Chemical">glycans is still a challenge. Many researchers decide not to record the degree of sialylation and use neuraminidases to remove the sialic acids from the glycans [38]. This largely simplifies glycan patterns, and at the same time increases the repeatability of the method.

If the determination of sialoforms is of interest, labeling and purification conditions should be chosen that reduce the risk of n class="Chemical">sialic acid hydrolysis: steps including low pH and high temperature and especially the combination of both have to be avoided. Users might consider labeling strategies other than acidic reductive amination, e.g., PMP labeling, to reduce the risk of hydrolysis. In addition, the acidic conditions under which storage takes place might catalyze hydrolysis. Loss of sialic acids also occurs when glycans are stored on MALDI plates with DHB as the matrix (unpublished results). Permethylation can largely stabilize sialic acids; however, the choice of the subsequent analytical techniques is then reduced owing to the increase in hydrophobicity of the labeled glycans. Loss of sialic acids during LC or CE separations is usually not a problem, even when very acidic conditions are applied. However, in combination with heating of the separation system, loss of sialic acid might become noticeable.

Detection with MS using ESI or MALDI can likewise give rise to loss of pan class="Chemical">sialic acids by in-source decay or metastable decay. Using a sepan>ration method capable of sepan>rating sialylated from nonsialylated glycoforms is advantageous, as it allows one to discriminate on the basis of retention/migration times between sialylated pan class="Chemical">glycan species which are present in the sample and those species which are formed by desialylation during MS.

Quantification and profiling

Relative quantification of labeled n class="Chemical">glycans by mass-spectrometric analysis has been shown to yield consistent results [34, 193]. One important aspect to take into consideration is the occurrence of in-source decay, where mainly sialic acids are lost, but also the loss of full antennae can be observed. The use of specific ion sources such as intermediate-pressure MALDI may successfully minimize in-source decay [185], whereas sialic acids may also be stabilized using permethylation [22].

In MALDI, n class="Chemical">DHB is widely used as the matrix. DHB usually results in macrocrystalline sample preparations. Recrystallization using ethanol leads to smaller, more equally distributed crystals, which enhances shot-to-shot reproducibility and is therefore advantageous for quantification, also in combination with automatic measurements.

Next to relative quantitation, absolute quantitation with internal standards is possible for comparative glycomics. For this purpose, stable isotope labels may be used in combination with MS (see “Comparative glycomics by MS”). The use of isotope-labeled PA or n class="Chemical">2-AA may be easy to implement in laboratories where the nonisotopic derivatives are already in use [40, 41]. Unfortunately, deuterium may result in retention shifts in chromatography, and Δm between glycan pairs for these labels is only 4 Da. Both disadvantages may be overcome by the use of aniline, which is labeled by 13C, and generates Δm of 6 Da [43, 44]. Aniline derivatives cannot be detected on the basis of fluorescence, but only by UV detection. However, as absolute quantitation using isotope-labeled internal standards will rely on mass-spectrometric detection, the lack of fluorescence detection should not represent a major drawback.

As an alternative, n class="Chemical">glycans may be isotope-labeled by permethylation [70, 71, 196]. Again, this will be easy in laboratories where permethylation is already employed; however, since the number of permethylation sites may differ per glycan, the Δm generated is also different per glycan. When this method is applied to compare complex mixtures, it will result in rather complex mass spectra. Recently an attempt to implement four-plex isotope labeling has been published [197]. Unfortunately, mass shifts are generated by the introduction of deuterium, which makes the use of chromatography difficult. Moreover, the labels are not commercially available yet.

As a counterpart to the stable isotope labelling by amino acids in cell culture method, which is widely applied in proteomics, n class="Chemical">15N metabolic labeling of oligosaccharides via glutamate may be employed [198]. Since only 1 Da mass difference is generated per GlcNAc, GalNAc, and sialic acid residue, the overall Δm per glycan is often quite small. Moreover, this method may be applied in cell cultures, but is not suitable for the comparison of patient material.

The use of isobaric labeling has only very recently been introduced to glycomics [61, 91]. With use of this approach, pairs of labeled pan class="Chemical">glycans are detected at the same nominal mass. As only very small mass differences are generated, the use of high-resolution MS, which is not available in every laboratory, is necessary.

All of these methods have not been used in larger sample sets yet, and we expect further labels to be developed, as well as commercialization of such tags.