Literature DB >> 20176359

Effects of idealized joint geometry on finite element predictions of cartilage contact stresses in the hip.

Andrew E Anderson1, Benjamin J Ellis, Steve A Maas, Jeffrey A Weiss.   

Abstract

Computational models may have the ability to quantify the relationship between hip morphology, cartilage mechanics and osteoarthritis. Most models have assumed the hip joint to be a perfect ball and socket joint and have neglected deformation at the bone-cartilage interface. The objective of this study was to analyze finite element (FE) models of hip cartilage mechanics with varying degrees of simplified geometry and a model with a rigid bone material assumption to elucidate the effects on predictions of cartilage stress. A previously validated subject-specific FE model of a cadaveric hip joint was used as the basis for the models. Geometry for the bone-cartilage interface was either: (1) subject-specific (i.e. irregular), (2) spherical, or (3) a rotational conchoid. Cartilage was assigned either a varying (irregular) or constant thickness (smoothed). Loading conditions simulated walking, stair-climbing and descending stairs. FE predictions of contact stress for the simplified models were compared with predictions from the subject-specific model. Both spheres and conchoids provided a good approximation of native hip joint geometry (average fitting error approximately 0.5mm). However, models with spherical/conchoid bone geometry and smoothed articulating cartilage surfaces grossly underestimated peak and average contact pressures (50% and 25% lower, respectively) and overestimated contact area when compared to the subject-specific FE model. Models incorporating subject-specific bone geometry with smoothed articulating cartilage also underestimated pressures and predicted evenly distributed patterns of contact. The model with rigid bones predicted much higher pressures than the subject-specific model with deformable bones. The results demonstrate that simplifications to the geometry of the bone-cartilage interface, cartilage surface and bone material properties can have a dramatic effect on the predicted magnitude and distribution of cartilage contact pressures in the hip joint. Copyright 2010 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Year:  2010        PMID: 20176359      PMCID: PMC2857573          DOI: 10.1016/j.jbiomech.2010.01.010

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  39 in total

1.  The effect of muscle loading on the simulation of bone remodelling in the proximal femur.

Authors:  Charalampos Bitsakos; Jan Kerner; Ian Fisher; Andrew A Amis
Journal:  J Biomech       Date:  2005-01       Impact factor: 2.712

2.  Physiologically based boundary conditions in finite element modelling.

Authors:  Andrew D Speirs; Markus O Heller; Georg N Duda; William R Taylor
Journal:  J Biomech       Date:  2006-12-12       Impact factor: 2.712

3.  The relationship between acetabular retroversion and osteoarthritis of the hip.

Authors:  W Y Kim; C E Hutchinson; J G Andrew; P D Allen
Journal:  J Bone Joint Surg Br       Date:  2006-06

4.  Hip joint center location by fitting conchoid shape to the acetabular rim region of MR images.

Authors:  MyungJin Kang
Journal:  Conf Proc IEEE Eng Med Biol Soc       Date:  2004

5.  The influence of the acetabular labrum on hip joint cartilage consolidation: a poroelastic finite element model.

Authors:  S J Ferguson; J T Bryant; R Ganz; K Ito
Journal:  J Biomech       Date:  2000-08       Impact factor: 2.712

6.  Direct comparison of contact areas, contact stress and subchondral mineralization in human hip joint specimens.

Authors:  R von Eisenhart-Rothe; F Eckstein; M Müller-Gerbl; J Landgraf; C Rock; R Putz
Journal:  Anat Embryol (Berl)       Date:  1997-03

Review 7.  The reaction of articular cartilage to injury and osteoarthritis (first of two parts).

Authors:  H J Mankin
Journal:  N Engl J Med       Date:  1974-12-12       Impact factor: 91.245

8.  Improved techniques for measuring in vitro the geometry and pressure distribution in the human acetabulum--I. Ultrasonic measurement of acetabular surfaces, sphericity and cartilage thickness.

Authors:  P D Rushfeldt; R W Mann; W H Harris
Journal:  J Biomech       Date:  1981       Impact factor: 2.712

9.  A computer simulation study of normal and abnormal hip joint contact pressure.

Authors:  E Genda; N Konishi; Y Hasegawa; T Miura
Journal:  Arch Orthop Trauma Surg       Date:  1995       Impact factor: 3.067

10.  Computer determination of contact stress distribution and size of weight bearing area in the human hip joint.

Authors:  Ales Iglic; V Kralj-Iglic; M Daniel; A Macek-Lebar
Journal:  Comput Methods Biomech Biomed Engin       Date:  2002-04       Impact factor: 1.763

View more
  43 in total

Review 1.  Multiscale mechanics of articular cartilage: potentials and challenges of coupling musculoskeletal, joint, and microscale computational models.

Authors:  J P Halloran; S Sibole; C C van Donkelaar; M C van Turnhout; C W J Oomens; J A Weiss; F Guilak; A Erdemir
Journal:  Ann Biomed Eng       Date:  2012-05-31       Impact factor: 3.934

2.  CORR Insights®: Increased Hip Stresses Resulting From a Cam Deformity and Decreased Femoral Neck-Shaft Angle During Level Walking.

Authors:  Andrew E Anderson
Journal:  Clin Orthop Relat Res       Date:  2016-10-26       Impact factor: 4.176

Review 3.  Subject-specific analysis of joint contact mechanics: application to the study of osteoarthritis and surgical planning.

Authors:  Corinne R Henak; Andrew E Anderson; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2013-02       Impact factor: 2.097

4.  Computationally efficient magnetic resonance imaging based surface contact modeling as a tool to evaluate joint injuries and outcomes of surgical interventions compared to finite element modeling.

Authors:  Joshua E Johnson; Phil Lee; Terence E McIff; E Bruce Toby; Kenneth J Fischer
Journal:  J Biomech Eng       Date:  2014-04       Impact factor: 2.097

5.  A new sensor for measurement of dynamic contact stress in the hip.

Authors:  M J Rudert; B J Ellis; C R Henak; N J Stroud; D R Pederson; J A Weiss; T D Brown
Journal:  J Biomech Eng       Date:  2014-03       Impact factor: 2.097

6.  Finite element prediction of cartilage contact stresses in normal human hips.

Authors:  Michael D Harris; Andrew E Anderson; Corinne R Henak; Benjamin J Ellis; Christopher L Peters; Jeffrey A Weiss
Journal:  J Orthop Res       Date:  2011-12-30       Impact factor: 3.494

7.  Hip chondrolabral mechanics during activities of daily living: Role of the labrum and interstitial fluid pressurization.

Authors:  Jocelyn N Todd; Travis G Maak; Gerard A Ateshian; Steve A Maas; Jeffrey A Weiss
Journal:  J Biomech       Date:  2018-01-16       Impact factor: 2.712

8.  Accuracy of 3D dual echo steady state (DESS) MR arthrography to quantify acetabular cartilage thickness.

Authors:  Christine L Abraham; Neal K Bangerter; Lance S McGavin; Christopher L Peters; Alex J Drew; Christopher J Hanrahan; Andrew E Anderson
Journal:  J Magn Reson Imaging       Date:  2015-04-06       Impact factor: 4.813

9.  A new discrete element analysis method for predicting hip joint contact stresses.

Authors:  Christine L Abraham; Steve A Maas; Jeffrey A Weiss; Benjamin J Ellis; Christopher L Peters; Andrew E Anderson
Journal:  J Biomech       Date:  2013-03-01       Impact factor: 2.712

10.  Finite element prediction of transchondral stress and strain in the human hip.

Authors:  Corinne R Henak; Gerard A Ateshian; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2014-02       Impact factor: 2.097

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.