Literature DB >> 29366559

Hip chondrolabral mechanics during activities of daily living: Role of the labrum and interstitial fluid pressurization.

Jocelyn N Todd1, Travis G Maak2, Gerard A Ateshian3, Steve A Maas4, Jeffrey A Weiss5.   

Abstract

Osteoarthritis of the hip can result from mechanical factors, which can be studied using finite element (FE) analysis. FE studies of the hip often assume there is no significant loss of fluid pressurization in the articular cartilage during simulated activities and approximate the material as incompressible and elastic. This study examined the conditions under which interstitial fluid load support remains sustained during physiological motions, as well as the role of the labrum in maintaining fluid load support and the effect of its presence on the solid phase of the surrounding cartilage. We found that dynamic motions of gait and squatting maintained consistent fluid load support between cycles, while static single-leg stance experienced slight fluid depressurization with significant reduction of solid phase stress and strain. Presence of the labrum did not significantly influence fluid load support within the articular cartilage, but prevented deformation at the cartilage edge, leading to lower stress and strain conditions in the cartilage. A morphologically accurate representation of collagen fibril orientation through the thickness of the articular cartilage was not necessary to predict fluid load support. However, comparison with simplified fibril reinforcement underscored the physiological importance. The results of this study demonstrate that an elastic incompressible material approximation is reasonable for modeling a limited number of cyclic motions of gait and squatting without significant loss of accuracy, but is not appropriate for static motions or numerous repeated motions. Additionally, effects seen from removal of the labrum motivate evaluation of labral reattachment strategies in the context of labral repair.
Copyright © 2018 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Biphasic; Cartilage mechanics; Finite element; Hip; Labrum

Mesh:

Year:  2018        PMID: 29366559      PMCID: PMC5815394          DOI: 10.1016/j.jbiomech.2018.01.001

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  60 in total

1.  The mechanics of focal chondral defects in the hip.

Authors:  Brenden J Klennert; Benjamin J Ellis; Travis G Maak; Ashley L Kapron; Jeffrey A Weiss
Journal:  J Biomech       Date:  2016-11-29       Impact factor: 2.712

2.  The influence of the acetabular labrum on hip joint cartilage consolidation: a poroelastic finite element model.

Authors:  S J Ferguson; J T Bryant; R Ganz; K Ito
Journal:  J Biomech       Date:  2000-08       Impact factor: 2.712

3.  Investigation of the preservation of the fluid seal effect in the repaired, partially resected, and reconstructed acetabular labrum in a cadaveric hip model.

Authors:  Edwin R Cadet; Andrew K Chan; George C Vorys; Thomas Gardner; Bob Yin
Journal:  Am J Sports Med       Date:  2012-09-07       Impact factor: 6.202

4.  The hip fluid seal--Part I: the effect of an acetabular labral tear, repair, resection, and reconstruction on hip fluid pressurization.

Authors:  Marc J Philippon; Jeffrey J Nepple; Kevin J Campbell; Grant J Dornan; Kyle S Jansson; Robert F LaPrade; Coen A Wijdicks
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2014-02-12       Impact factor: 4.342

5.  Finite element prediction of cartilage contact stresses in normal human hips.

Authors:  Michael D Harris; Andrew E Anderson; Corinne R Henak; Benjamin J Ellis; Christopher L Peters; Jeffrey A Weiss
Journal:  J Orthop Res       Date:  2011-12-30       Impact factor: 3.494

6.  Accuracy of 3D dual echo steady state (DESS) MR arthrography to quantify acetabular cartilage thickness.

Authors:  Christine L Abraham; Neal K Bangerter; Lance S McGavin; Christopher L Peters; Alex J Drew; Christopher J Hanrahan; Andrew E Anderson
Journal:  J Magn Reson Imaging       Date:  2015-04-06       Impact factor: 4.813

7.  Anisotropic hydraulic permeability in compressed articular cartilage.

Authors:  Boris Reynaud; Thomas M Quinn
Journal:  J Biomech       Date:  2004-12-13       Impact factor: 2.712

8.  The material properties of the bovine acetabular labrum.

Authors:  S J Ferguson; J T Bryant; K Ito
Journal:  J Orthop Res       Date:  2001-09       Impact factor: 3.494

Review 9.  Toward patient-specific articular contact mechanics.

Authors:  Gerard A Ateshian; Corinne R Henak; Jeffrey A Weiss
Journal:  J Biomech       Date:  2014-12-18       Impact factor: 2.712

10.  Comparative study of the intrinsic mechanical properties of the human acetabular and femoral head cartilage.

Authors:  K A Athanasiou; A Agarwal; F J Dzida
Journal:  J Orthop Res       Date:  1994-05       Impact factor: 3.494

View more
  2 in total

1.  A Plugin Framework for Extending the Simulation Capabilities of FEBio.

Authors:  Steve A Maas; Steven A LaBelle; Gerard A Ateshian; Jeffrey A Weiss
Journal:  Biophys J       Date:  2018-09-26       Impact factor: 4.033

2.  How Does Chondrolabral Damage and Labral Repair Influence the Mechanics of the Hip in the Setting of Cam Morphology? A Finite-Element Modeling Study.

Authors:  Jocelyn N Todd; Travis G Maak; Andrew E Anderson; Gerard A Ateshian; Jeffrey A Weiss
Journal:  Clin Orthop Relat Res       Date:  2022-03-01       Impact factor: 4.755

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.