| Literature DB >> 19014712 |
Tim Mitchell1, Peter B O'Sullivan, Angus F Burnett, Leon Straker, Anne Smith.
Abstract
BACKGROUND: Spinal posture is commonly a focus in the assessment and clinical management of low back pain (LBP) patients. However, the link between spinal posture and LBP is not fully understood. Recent evidence suggests that considering regional, rather than total lumbar spine posture is important. The purpose of this study was to determine; if there are regional differences in habitual lumbar spine posture and movement, and if these findings are influenced by LBP.Entities:
Mesh:
Year: 2008 PMID: 19014712 PMCID: PMC2605454 DOI: 10.1186/1471-2474-9-152
Source DB: PubMed Journal: BMC Musculoskelet Disord ISSN: 1471-2474 Impact factor: 2.362
Subject Demographics and LBP Characteristics
| 21.7 ± 3.5 | 22.0 ± 4.2 | 23.9 ± 5.1 | |
| 21.9 ± 2.8 | 23.3 ± 4.3 | 23.1 ± 3.4 | |
| 0 | 3.9 ± 2.3 | 6.6 ± 1.6 | |
| 0 | 1–7 | 8–30 | |
| 0 | 44.4 | 96.2 | |
| 0 | 10.4 ± 6.6 | 21.2 ± 9.2 |
BMI = body mass index. VAS = visual analogue scale.
Figure 1Test postures.
Figure 2Spinal model used for the calculation of lumbar angles. LLx = lower lumbar; ULx = upper lumbar. Total lumbar angle is the angle formed between the tangents from the sensors at T12 and S2.
Comparisons between upper lumbar and lower lumbar spine static and peak angles across postures and tasks.
| 4.1 ± 8.8 | -1.3 ± 8.8 | < 0.001 | 0.497 | 0.036 (0.638) | |
| 23.4 ± 11.2 | 15.5 ± 9.6 | < 0.001 | 0.016 | - 0.505 (< 0.001) | |
| 1.6 ± 9.1 | -8.6 ± 6.1 | < 0.001 | 0.770 | - 0.111 (0.151) | |
| 31.2 ± 13.6 | 17.4 ± 11.9 | < 0.001 | 0.576 | - 0.58 (< 0.001) | |
| 11.8 ± 6.8 | 15.4 ± 5.9 | < 0.001 | 0.026 | - 0.062 (0.426) | |
| 44.1 ± 19.9 | 25.8 ± 16.0 | < 0.001 | 0.183 | - 0.509 (< 0.001) | |
| -8.1 ± 7.2 | -12.5 ± 6.3 | < 0.001 | 0.015 | 0.197 (0.012) | |
| -5.3 ± 8.3 | -8.5 ± 8.5 | < 0.001 | 0.108 | 0.274 (< 0.001) | |
| 3.5 ± 8.5 | -4.7 ± 8.3 | < 0.001 | 0.013 | - 0.017 (0.825) | |
| 8.4 ± 8.9 | 1.7 ± 8.4 | < 0.001 | 0.031 | - 0.147 (0.062) | |
| -3.2 ± 9.0 | -2.9 ± 9.6 | 0.866 | 0.968 | 0.346 (< 0.001) |
Repeated measures ANCOVA and correlations adjusted for BMI.
LLx = Lower Lumbar, ULx = Upper Lumbar, BMI = Body Mass Index, Negative value = relative flexion (kyphosis) of lumbar spine.
Comparisons between upper lumbar and lower lumbar spine range of motion across postures and tasks.
| 2.5 ± 4.0 | 7.3 ± 7.0 | < 0.001 | 0.072 | 0.525 (< 0.001) | |
| 8.2 ± 5.4 | 0.8 ± 5.4 | < 0.001 | < 0.001 | - 0.469 (< 0.001) | |
| 35.0 ± 10.0 | 30.8 ± 9.9 | 0.003 | 0.033 | - 0.442 (< 0.001) | |
| 20.6 ± 13.3 | 8.9 ± 11.1 | < 0.001 | 0.001 | - 0.426 (< 0.001) | |
| 55.7 ± 18.6 | 39.8 ± 17.0 | < 0.001 | 0.042 | - 0.460 (< 0.001) | |
| 31.4 ± 9.9 | 28.0 ± 9.1 | 0.004 | 0.140 | - 0.332 (< 0.001) | |
| 28.7 ± 10.2 | 24.0 ± 10.1 | < 0.001 | 0.069 | - 0.142 (0.071) | |
| 19.9 ± 8.2 | 20.3 ± 9.3 | 0.775 | 0.290 | - 0.186 (0.018) | |
| 15.0 ± 7.3 | 13.9 ± 8.2 | 0.170 | 0.160 | - 0.041 (0.601) | |
| 26.5 ± 10.2 | 18.4 ± 11.8 | < 0.001 | 0.009 | - 0.008 (0.918) |
Repeated measure ANCOVA and correlations adjusted for BMI.
LLx = Lower Lumbar, ULx = Upper Lumbar, BMI = Body Mass Index, ROM = Range of Motion.