| Literature DB >> 32326637 |
Benjamin M M Grant1,2, Masahiro Enomoto1, Mitsuhiko Ikura1,2, Christopher B Marshall1.
Abstract
Calmodulin (CaM) is a Ca2+-sensor that regulates a wide variety of target proteins, many of which interact through short basic helical motifs bearing two hydrophobic 'anchor' residues. CaM comprises two globular lobes, each containing a pair of EF-hand Ca2+-binding motifs that form a Ca2+-induced hydrophobic pocket that binds an anchor residue. A central flexible linker allows CaM to accommodate diverse targets. Several reported CaM interactors lack these anchors but contain Lys/Arg-rich polybasic sequences adjacent to a lipidated N- or C-terminus. Ca2+-CaM binds the myristoylated N-terminus of CAP23/NAP22 with intimate interactions between the lipid and a surface comprised of the hydrophobic pockets of both lobes, while the basic residues make electrostatic interactions with the negatively charged surface of CaM. Ca2+-CaM binds farnesylcysteine, derived from the farnesylated polybasic C-terminus of KRAS4b, with the lipid inserted into the C-terminal lobe hydrophobic pocket. CaM sequestration of the KRAS4b farnesyl moiety disrupts KRAS4b membrane association and downstream signaling. Phosphorylation of basic regions of N-/C-terminal lipidated CaM targets can reduce affinity for both CaM and the membrane. Since both N-terminal myristoylated and C-terminal prenylated proteins use a Singly Lipidated Polybasic Terminus (SLIPT) for CaM binding, we propose these polybasic lipopeptide elements comprise a non-canonical CaM-binding motif.Entities:
Keywords: Ca2+ signaling; Calmodulin; KRAS4b; membrane association; myristoylation; polybasic region; prenylation; protein structure/function
Year: 2020 PMID: 32326637 PMCID: PMC7216078 DOI: 10.3390/ijms21082751
Source DB: PubMed Journal: Int J Mol Sci ISSN: 1422-0067 Impact factor: 5.923
Figure 1Diversity of calmodulin target binding. Structures of canonical and non-canonical calmodulin:target complexes selected to illustrate diverse modes of binding. PDB accession codes for each structure are indicated along with the target name and motif type. The calmodulin C-terminal and N-terminal lobes are coloured brown and blue, respectively, and target peptides and proteins are dark red. Lipid components of targets are green. Acronyms are: MARCKS (myristoylated alanine-rich C kinase substrate), CaMKII (Calmdoulin Kinase II), MLCK (Myosin Light Chain Kinase), CaMKK (Calmodulin Kinase Kinase), RyR (Ryanodine Receptor), PMCA (Protein Misfolding Cyclic Amplification), CaMKII CD (CaMKII C-terminal domain), C20W (the C20W peptide from the plasma membrane calcium pump), GAD (Glutamate Decarboxylase). CaM:target stoichiometry is indicated in cases where it is not 1:1 (e.g., one molecule of CaM binds two GAD or four sphingolipids, and two CaM peptides bind a single myosin peptide).
Figure 2The Singly Lipidated Polybasic Terminus (SLIPT) non-canonical calmodulin-binding motif. Top: sequence of the myristoylated SLIPT motif in CAP23/NAP22 and the farnesylated SLIPT in KRAS4b. Middle: Ribbon models of Ca2+-calmodulin in complex with a myristoylated N-terminal peptide of CAP23/NAP22 (PDB accession code 1L7Z) and farnesyl cysteine methyl ester (FCME), representing the farnesylated C-terminal residue of KRAS4b (PDB 6OS4). The calmodulin C-terminal and N-terminal lobes are coloured brown and blue, respectively, with lipids in green and peptidyl moieties of the targets in red. Bottom: Space filling models of the N-terminal and C-terminal lobes of calmodulin showing how the SLIPT motifs interact. Right panel: Sequences of SLIPT motif sequences from KRAS4b, other small GTPase proteins and myristoylated proteins. Sequences of RAS isoforms lacking SLIPT motifs are also shown. Reported phosphorylation sites are red, palmitoylation sites are green and basic residues are highlighted in blue. Myr, Myristoyl; farn, farnesyl; gg, geranylgeranyl.
Figure 3CaMeRAS demonstrates reversible Ca2+-/farnesyl-dependent internalization and FRET change. (A) Schematic of CaMeRAS and bimodal use for CaM-KRAS4b binding model validation. When transiently expressed in mammalian cells, the chimeric construct is natively processed at the C-terminal CaaX box (i.e., farnesylation of Cys185, cleavage of aaX residues, and carboxymethylation of the new C-terminus), allowing tethering of the construct to the plasma membrane. Upon cytosolic Ca2+ elevation, Ca2+-CaM extracts KRAS4b from the membrane, visible with fluorescence imaging, and the structural rearrangement of the chimera leads to detectable FRET. (B) Schematic of CaMeRAS variants transiently expressed in each experiment: CaMeRASWT (comprised of wild-type CaM and KRAS4b), CaMeRAS185A (KRAS4b Cys185 mutated to Ala to prevent farnesylation), and CaMeRAS1234Q (a key residue involved in coordination of Ca2+ in each of the four EF hands in CaM was mutated [i.e., E31Q, E67Q, E104Q and E140Q] to impair binding of Ca2+. An X indicates where each mutant is deficient. (C–F) After loading the cells with 10 µM Calbryte 630AM (AAT Bioquest), imaging was performed at room temperature using a Leica SP8 confocal microscope with a 63x/1.4 numerical aperture (NA) oil immersion objective lens and high-sensitivity HyD detectors. For simultaneous visualization of mTq2, SYFP2, and Calbryte 630, a 440-nm solid state laser and a white light laser tuned to 608 nm were used for excitation of mTq2 and Calbryte 630, respectively, and fluorescence emission was collected at 455 to 490 nm (mTq2), 525 to 560 nm (SYFP2), and 620 to 750 nm (Calbryte). Images were acquired at 3.4 to 4.0 s per frame. (C) Cellular localization (mTq2) of CaMeRAS constructs before histamine stimulation in HeLa cells. CaMeRASWT and CaMeRAS1234Q, farnesylated constructs, are localized on the plasma membrane, while CaMeRAS185A is distributed in the cytoplasm. Scale bars measure 10 μm. (D) Cellular localization (mTq2) of constructs at 60 s after treatment with 100 μM histamine. The CaMeRASWT localization becomes cytoplasmic over time while CaMeRAS185A and CaMeRAS1234Q mutants retain their prior localization. (E) Representative mTq2 intensity distributions over time for cellular cross-sections (yellow lines in (C)) show changes in cellular localization following histamine stimulation at 60 s (yellow arrowheads) after starting imaging. CaMeRASWT experiences a shift from plasma membrane to cytosol while the membrane and cytosolic localization of CaMeRAS185A and CaMeRAS1234Q remain unperturbed. (F) FRET was measured by comparing the ratio of mTq2 to SYFP2 emissions within many small segments along the plasma membrane (PM) and in the cytoplasm (Cyt) before and after histamine stimulation. Histograms of FRET readouts (ratio of SYFP2/mTq2 emissions) pre- and post-stimulation. CaMeRASWT shows a significant change in FRET signal post histamine as it translocates from PM to Cyt (left). A minor FRET change was observed in Cyt for CaMeRAS185A (middle), likely due the conformational change of CaM in response to Ca2+ binding. No FRET change was detected for CaMeRAS1234Q (right). Data fitting the normal distributions was performed by using Gaussian functions. (Adapted from Grant et al. 2020; Reference [55]).