| Literature DB >> 30763337 |
Saúl Jijón-Moreno1, Beatriz Eugenia Baca1, Diana Carolina Castro-Fernández1, Alberto Ramírez-Mata1.
Abstract
Azospirillum brasilense is one of the most studied species of diverse agronomic plants worldwide. The benefits conferred to plants inoculated withEntities:
Mesh:
Substances:
Year: 2019 PMID: 30763337 PMCID: PMC6375630 DOI: 10.1371/journal.pone.0211904
Source DB: PubMed Journal: PLoS One ISSN: 1932-6203 Impact factor: 3.240
Bacterial strains, and plasmids used in this study.
| Strains | Characteristic(s) | Source or |
|---|---|---|
| F-
| Thermo Fisher | |
| [ | ||
| Wild-type strain | [ | |
| [ | ||
| This study | ||
| This study | ||
| This study | ||
| This study | ||
| pCR2.1-TOPO | Cloning vector, ApR, KmR. | Invitrogen Thermo Fisher MX |
| pBlueScript + (pBSK+) | Cloning vector | Stratagene, La Jolla, CA, USA |
| pBSL142 | Plasmid vector GmR | [ |
| pJB3Tc20 | Plasmid derived from RK2 oriT, TcR, ApR | [ |
| pSUP202 | Suicide plasmid TcR, ApR, CmR | [ |
| pCR2.1- | Plasmid derived from pCR2.1-TOPO carrying a fragment of 2886 bp with the | This study |
| pBSK- | Plasmid derived from pBSK+ carrying the | This study |
| pCR2.1- | Plasmid derived from pCR2.1- | This study |
| pAB2116 | Plasmid derived from pSUP202 carrying | This study |
| pJB3- | Plasmid derived from pJB3Tc20 carrying the | This study |
Gm = Gentamycin, Ap = Ampicillin, Tc = Tetracycline, Cm = Chloramphenicol, Km = Kanamycin.
Oligonucleotides used in this study.
| Oligonucleotides | Characteristic(s) | Source or |
|---|---|---|
| TyrR-F1 | This study | |
| TyrR-R1.1 | This study | |
| RGm3 | This study | |
| F-tyrR-Sp7 | This study | |
| TyrR-R1 | This study | |
| PrTyrR-F-Sp7 | This study | |
| PrTyrR-R-Sp7 | This study | |
| tyrR-RT-F | This study | |
| tyrR-RT-R | This study | |
| dadA-RT-F | This study | |
| dadA-RT-R | This study | |
| gyrA-RT-F | [ | |
| gyrA-RT-R | [ |
Fig 1The overall predicted and domains displayed by the TyrR protein from A. brasilense Sp7 (Ab-Sp7).
(A) The TyrR protein consists of an ACT domain (red square), a PAS domain (red pentagon), an AAA+ domain (gray rectangle) and an HTH motif (purple hexagon). (B) The topology of the N-terminal region of a TyrR monomer from E. coli K12 with its separate domains. (C) Comparison by superposition of monomers of TyrR from the E. coli K12 (blue) crystal structure with a resolution of 2.3 Å and Ab-Sp7 (beige) with a root mean square deviation (RMSD) of 1.59 Å. (D) The prediction of the AAA+ monomer domain of TyrR from Ab-Sp7. The ribbon representation of Ab_TyrR-AAA+ consists of an α/β sub domain followed by a smaller α-helical subdomain. The regions and the PAS domain are highlighted. (E) Superimposition of the Pa_FleQ-AAA+ crystal structure with a resolution of 1.8 Å (blue) and Ab_TyrR-AAA+ (beige) with a RSMD of 0.89 Å. The significant motifs are highlighted: Walker A (red), Walker B (yellow), R finger (dark blue), Loop L1, (green), Loop L2 (cyan). (F) Sequence logo representations of sequence alignments of Walker A (GXXXXGK), Walker B (hhhhDE), R finger (RXXXXXR), Loop L2 (VG), Loop L1 (GAFTGA), and multiple sequence alignments of FleQ (P. aeruginosa), TyrR (A. brasilense Sp7), TyrR (E. coli K12), TyrR (E. cloacae) were used. (G) Comparison by structure superimposition of the Ab-TyrR-HTH model (beige) and template 1G2H of H. influenzae (blue color). Three well defined α-helices (HR-2, HR-1, and HR) are shown. (H) Superimposed structures show the crucial amino acids involved in forming hydrogen bonds directly with DNA are highlighted: arginine 291 (R), arginine 296 (R), histidine 301 (H), lysine 307 (K), and leucine 308 (L). The homology models constructed by I-Tasser with the best scores, C-score -1.21, RMSD 1.25 Å, visualized with UCSF Chimera software. Logos were generated with the Weblogo 3 Create software.
Fig 2Sequences of the cis elements contained in the intergenic promoter region of the tyrR and dadA genes from A. brasilense Sp7.
The TyrR boxes are shown in blod and are included in a rectangle; the -12 and -24 promoter regions are indicated in bold and with lines. The arrows indicate the ORFs of the tyrR and dadA genes. Identification of tyrR boxes in the A. brasilense Sp7 genome using the Find Individual Motif Occurrences (FIMO) software tool, which is part of the MEME Suite software toolkit [42].
IAA production determination in A. brasilense wild-type strain and derivatives.
| AIA production μg/mg protein | ||||
|---|---|---|---|---|
| Strain | 16 h | 24 h | 36 h | 40 h |
| 6.38 | 29.1 | 37.4 | 38.79 | |
| 3.84 | 23.35 | 30.66 | 35.62 | |
| ND | 2.37 | 4.05 | 5.2 | |
* IAA production was determined at
a exponential phase (OD600 = 1.04 ± 0.01)
b initial stationary phase, (OD600 = 1.29 ± 0.01)
C stationary phase, (OD600 = 1.34 ± 0.02); and
d late stationary phase, (OD600 = 1.34 ± 0.01). The results are from three independent experiments. ND, not determined.
Fig 3Expression analysis of ipdC-lacZ transcriptional fusion under the control of A. brasilense 2119 tyrR minus strain.
A. brasilense strains were grown in minimal media (MM) with malate, as described in the Material and Methods section, during 16, 24 and 36 h. Data are reported as Miller units by mg of protein from three independent experiments with two biological replicates.
Fig 4Growth profiles of the A. brasilense Sp7, 2116, 2117, and 2118 strains.
(A) Growth kinetics of A. brasilense strains in minimal media (MM) with malate or D-alanine as the sole carbon sources. The strains were grown in MM supplemented with malate (20 mM) or DL-alanine (20 mM) as carbon sources. Growth was followed at OD600 nm every 4 h until 56 h. Sp7, 2116, 2117 and 2118 strains.The data points represent the average from three independent cultures of each strain. (B) Growth of A. brasilense strains in minimal medium with D-alanine as the sole nitrogen source. Bacterial strains were grown in DL-malate minimal medium supplemented with D-alanine (20 mM) as the sole nitrogen source. Growth was followed at OD600 nm every 4 h until 36 h. The data points represent the average from three independent cultures of each strain.
Fig 5RT-PCR analysis of dadA, tyrR and gyrA expression from the A. brasilense Sp7, 2116, and 2117 strains.
RT-PCR analysis of tyrR, dadA and gyrA expression from the A. brasilense Sp7, 2116 and 2117 strains. Total RNA (1 μg) from each strain was subjected to reverse transcription, and the obtained cDNA was amplified using pairs of primers specific for tyrR. (A) dadA, (B), and gyrA (C) A. brasilense strains are indicated at the top of each lane by their conventional denomination. The expected PCR products of 196 bp (tyrR), 145 bp (dadA) and 143 bp (gyrA) were visualized by ethidium bromide staining on a 2.5% agarose gel. A positive control (+), represented by genomic DNA. A negative reaction control is represented by (-), without reverse transcriptase, both were included in each experiment. The image is representative of three independents experiments.
Fig 6Biofilms and EPS production by the A. brasilense Sp7, 2116, and 2117 strains.
(A) CR staining assay. Cells were grown on agar-solidified CR medium inoculated with 10 μL of 1.0 OD600 nm of each culture strains for 72 h at 30 ºC. For EPS quantification, the strains were cultured as described in Material and Methods and incubated at 30°C for 5 days. CR binding was expressed as mg CR/OD600 nm. (B) For biofilm production cells were grown statically for 5 days at 30 ºC on NFb* with 27mM malate as a C source + 10mM D-alanine. Biofilm formation was visualized by Crystal violet staining as well quantified and normalized per OD600 nm of growth. All data are the average from three independent experiments performed in duplicate. Error bars indicate standard errors of the means as compared with values observed for WT. For all data, P was < 0.001 as assessed by Student´s t-test. (C) Calcofluor white colorant M2R (CWC) staining. Cells were grown on agar-solidified NFb* supplemented with CWC and inoculated with 10 μL of 1.0 OD600 nm of each culture strains for five days at 30 ºC. The cell fluorescence was observed under was observed with a Nikon Eclipse Ti-E C2+. Bars represent 10 μm. The white arrows indicate EPS.