Literature DB >> 30325716

A field evaluation of a single sampler for respirable and inhalable indium and dust measurements at an indium-tin oxide manufacturing facility.

Brie Hawley Blackley1, Jenna L Gibbs1,2, Kristin J Cummings1, Aleksandr B Stefaniak1, Ji Young Park1,3, Marcia Stanton1, M Abbas Virji1.   

Abstract

Indium-tin oxide production has increased greatly in the last 20 years subsequent to increased global demand for touch screens and photovoltaics. Previous studies used measurements of indium in blood as an indicator of indium exposure and observed associations with adverse respiratory outcomes. However, correlations between measurements of blood indium and airborne respirable indium are inconsistent, in part because of the long half-life of indium in blood, but also because respirable indium measurements do not incorporate inhalable indium that can contribute to the observed biological burden. Information is lacking on relationships between respirable and inhalable indium exposure, which have implications for biological indicators like blood indium. The dual IOM sampler includes the foam disc insert and can simultaneously collect respirable and inhalable aerosol. Here, the field performance of the dual IOM sampler was evaluated by comparing performance with the respirable cyclone and traditional IOM for respirable and inhalable indium and dust exposure, respectively. Side-by-side area air samples were collected throughout an indium-tin oxide manufacturing facility. Cascade impactors were used to determine particle size distribution. Several statistical methods were used to evaluate the agreement between the pairs of samplers including calculating the concordance correlation coefficient and its accuracy and precision components. One-way ANOVA was used to evaluate the effect of dust concentration on sampler differences. Respirable indium measurements showed better agreement (concordance correlation coefficient: 0.932) compared to respirable dust measurements (concordance correlation coefficient: 0.777) with significant differences observed in respirable dust measurements. The dual IOM measurements had high agreement with the traditional IOM for inhalable indium (concordance correlation coefficient: 0.997) but lower agreement for inhalable dust (concordance correlation coefficient: 0.886 and accuracy: 0.896) with a significantly large mean bias (-146.9 µg/m3). Dust concentration significantly affected sampler measurements of inhalable dust and inhalable indium. Results from this study suggest that the dual IOM is a useful single sampler for simultaneous measurements of occupational exposure to respirable and inhalable indium.

Entities:  

Keywords:  IOM; Indium-tin oxide; inhalable; respirable

Mesh:

Substances:

Year:  2019        PMID: 30325716      PMCID: PMC6419101          DOI: 10.1080/15459624.2018.1536826

Source DB:  PubMed          Journal:  J Occup Environ Hyg        ISSN: 1545-9624            Impact factor:   2.155


  26 in total

1.  Applications of low-cost, dual-fraction dust samplers.

Authors:  L Kenny; K Chung; M Dilworth; C Hammond; J Wynn Jones; Z Shreeve; J Winton
Journal:  Ann Occup Hyg       Date:  2001-01

2.  Weighing imprecision and handleability of the sampling cassettes of the IOM sampler for inhalable dust.

Authors:  G Lidén; G Bergman
Journal:  Ann Occup Hyg       Date:  2001-04

3.  Total deviation index for measuring individual agreement with applications in laboratory performance and bioequivalence.

Authors:  L I Lin
Journal:  Stat Med       Date:  2000-01-30       Impact factor: 2.373

4.  Field comparison of 37-mm closed-face cassettes and IOM samplers.

Authors:  Martine Demange; Peter Görner; Jean-Marie Elcabache; Richard Wrobel
Journal:  Appl Occup Environ Hyg       Date:  2002-03

5.  Accuracy and repeatability of weighing for occupational hygiene measurements: results from an inter-laboratory comparison.

Authors:  Peter Stacey; Graham Revell; Barry Tylee
Journal:  Ann Occup Hyg       Date:  2002-11

6.  Laboratory and field testing of particle size-selective sampling methods for mineral dusts.

Authors:  Marja Teikari; Markku Linnainmaa; Juha Laitinen; Pentti Kalliokoski; James Vincent; Petri Tiitta; Taisto Raunemaa
Journal:  AIHA J (Fairfax, Va)       Date:  2003 May-Jun

7.  Field comparison of inhalable and total dust samplers for assessing airborne dust in swine confinement barns.

Authors:  Bernardo Z Predicala; Ronaldo G Maghirang
Journal:  Appl Occup Environ Hyg       Date:  2003-09

8.  The inhalation toxicity of indium sesquioxide in the rat.

Authors:  L J LEACH; J K SCOTT; R D ARMSTRONG; L T STEADMAN; E A MAYNARD
Journal:  ORINS Rep US At Energy Comm       Date:  1961-05-10

9.  Laboratory and field testing of sampling methods for inhalable and respirable dust.

Authors:  Markku Linnainmaa; Juha Laitinen; Ari Leskinen; Olli Sippula; Pentti Kalliokoski
Journal:  J Occup Environ Hyg       Date:  2008-01       Impact factor: 2.155

10.  Application of PUF foam inserts for respirable dust measurements in the brick-manufacturing industry.

Authors:  Frank De Vocht; Adrian Hirst; Anthony Gardner
Journal:  Ann Occup Hyg       Date:  2008-10-31
View more
  3 in total

1.  Pulmonary and Systemic Toxicity in a Rat Model of Pulmonary Alveolar Proteinosis Induced by Indium-Tin Oxide Nanoparticles.

Authors:  Nan Liu; Yi Guan; Chunling Zhou; Yongheng Wang; Zhanfei Ma; Sanqiao Yao
Journal:  Int J Nanomedicine       Date:  2022-02-17

Review 2.  Review of Workplace Based Aerosol Sampler Comparison Studies, 2004-2020.

Authors:  James Hanlon; Karen S Galea; Steven Verpaele
Journal:  Int J Environ Res Public Health       Date:  2021-06-25       Impact factor: 3.390

3.  Assessment of Occupational Exposure to Indium Dust for Indium-Tin-Oxide Manufacturing Workers.

Authors:  Boo Wook Kim; Wonseok Cha; Sungwon Choi; Jungah Shin; Byung-Soon Choi; Miyeon Kim
Journal:  Biomolecules       Date:  2021-03-12
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.