Literature DB >> 33809058

Assessment of Occupational Exposure to Indium Dust for Indium-Tin-Oxide Manufacturing Workers.

Boo Wook Kim1, Wonseok Cha1, Sungwon Choi1, Jungah Shin1, Byung-Soon Choi1, Miyeon Kim1.   

Abstract

According to recent research, indium nanoparticles (NPs) are more toxic than micro-sized particles. While cases of indium lung disease have been reported worldwide, very little research has been conducted on the occupational exposure to indium NPs. Recently, an indium-related lung disease was reported in Korea, a global powerhouse for display manufacturing. In this study, we conducted an assessment ofoccupational exposure at an indium tin oxide (ITO) powder manufacturing plant, where the first case of indium lung disease in Korea occurred. Airborne dustwas obtained from a worker's breathing zone, and area sampling in the workplace environment was conducted using real-time monitoring devices. Personal samples were analyzed for the indium concentrations in total dust, respirable dust fraction, and NPs using personal NPs respiratory deposition samplers. The total indium concentration of the personal samples was lower than the threshold limit value recommended by the American Conference of Governmental Industrial Hygienists (ACGIH TLV), which was set as occupational exposure limit (OEL). However, the respirable indium concentration exceeded the recently set ACGIH TLV for the respirable fraction of indium dust. The concentration of indium NPs ranged between 0.003 and 0.010 × 10-2 mg/m3, accounting for only 0.4% of the total and 2.7% of the respirable indium particles. This was attributed to the aggregating of NPs at the µm sub-level. Given the extremely low fraction of indium NPs in the total and respirable dust, the current OEL values, set as the total and respirable indium concentrations, do not holistically represent the occupational exposure to indium NPs or prevent health hazards. Therefore, it is necessary to set separate OEL values for indium NPs. This study covers only the process of handling ITO powder. Therefore, follow-up studies need to be conducted on other ITO sputtering target polishing and milling processes, which typically generate more airborne NPs, to further investigate the effects of indium on workers and facilitate the necessary implementation of indium-reducing technologies.

Entities:  

Keywords:  ITO; exposure assessment; indium; indium lung disease; nanoparticle; occupational exposure; occupational exposure limit

Year:  2021        PMID: 33809058      PMCID: PMC7998774          DOI: 10.3390/biom11030419

Source DB:  PubMed          Journal:  Biomolecules        ISSN: 2218-273X


  22 in total

1.  A personal nanoparticle respiratory deposition (NRD) sampler.

Authors:  Lorenzo G Cena; T Renée Anthony; Thomas M Peters
Journal:  Environ Sci Technol       Date:  2011-07-13       Impact factor: 9.028

2.  Ultrafine particle characteristics in a rubber manufacturing factory.

Authors:  Boowook Kim; Jong Seong Lee; Byung-Soon Choi; So-Young Park; Jin-Ha Yoon; Hyunwook Kim
Journal:  Ann Occup Hyg       Date:  2013-01-09

3.  The early onset and persistent worsening pulmonary alveolar proteinosis in rats by indium oxide nanoparticles.

Authors:  Sung-Hyun Kim; Soyeon Jeon; Dong-Keun Lee; Seonghan Lee; Jiyoung Jeong; Jong Sung Kim; Wan-Seob Cho
Journal:  Nanotoxicology       Date:  2019-11-27       Impact factor: 5.913

4.  Interstitial lung disorders in the indium workers of Korea: an update study for the relationship with biological exposure indices.

Authors:  Sungyeul Choi; Yong Lim Won; Dohyung Kim; Mi-Young Lee; Yoon Jung Choi; Jai-Soung Park; Hyoung-Ryoul Kim; Jung Im Jung; Sang-Gil Lee; Eun-A Kim
Journal:  Am J Ind Med       Date:  2014-10-23       Impact factor: 2.214

5.  Indium lung disease.

Authors:  Kristin J Cummings; Makiko Nakano; Kazuyuki Omae; Koichiro Takeuchi; Tatsuya Chonan; Yong-Long Xiao; Russell A Harley; Victor L Roggli; Akira Hebisawa; Robert J Tallaksen; Bruce C Trapnell; Gregory A Day; Rena Saito; Marcia L Stanton; Eva Suarthana; Kathleen Kreiss
Journal:  Chest       Date:  2011-12-29       Impact factor: 9.410

6.  Indium oxide (In2O3) nanoparticles induce progressive lung injury distinct from lung injuries by copper oxide (CuO) and nickel oxide (NiO) nanoparticles.

Authors:  Jiyoung Jeong; Jeongeun Kim; Seung Hyeok Seok; Wan-Seob Cho
Journal:  Arch Toxicol       Date:  2015-03-03       Impact factor: 5.153

7.  A field evaluation of a single sampler for respirable and inhalable indium and dust measurements at an indium-tin oxide manufacturing facility.

Authors:  Brie Hawley Blackley; Jenna L Gibbs; Kristin J Cummings; Aleksandr B Stefaniak; Ji Young Park; Marcia Stanton; M Abbas Virji
Journal:  J Occup Environ Hyg       Date:  2019-01-28       Impact factor: 2.155

8.  Respirable indium exposures, plasma indium, and respiratory health among indium-tin oxide (ITO) workers.

Authors:  Kristin J Cummings; M Abbas Virji; Ji Young Park; Marcia L Stanton; Nicole T Edwards; Bruce C Trapnell; Brenna Carey; Aleksandr B Stefaniak; Kathleen Kreiss
Journal:  Am J Ind Med       Date:  2016-05-24       Impact factor: 2.214

9.  Evaluation of personal exposure of workers to indium concentrations in total dust and its respirable fraction at three Japanese indium plants.

Authors:  Ichiro Higashikubo; Heihachiro Arito; Yoko Eitaki; Kenji Ando; Akihiro Araki; Hidesuke Shimizu; Haruhiko Sakurai
Journal:  Ind Health       Date:  2018-08-02       Impact factor: 2.179

10.  Assessment of nanoparticle exposure in nanosilica handling process: including characteristics of nanoparticles leaking from a vacuum cleaner.

Authors:  Boowook Kim; Hyunwook Kim; Il Je Yu
Journal:  Ind Health       Date:  2013-12-21       Impact factor: 2.179

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.