Isolation and Characterization of Phages Infecting Bacillus subtilis.

Bacteriophages have been suggested as an alternative approach to reduce the amount of pathogens in various applications. Bacteriophages of various specificity and virulence were isolated as a means of controlling food-borne pathogens. We studied the interaction of bacteriophages with Bacillus species, which are very often persistent in industrial applications such as food production due to their antibiotic resistance and spore formation. A comparative study using electron microscopy, PFGE, and SDS-PAGE as well as determination of host range, pH and temperature resistance, adsorption rate, latent time, and phage burst size was performed on three phages of the Myoviridae family and one phage of the Siphoviridae family which infected Bacillus subtilis strains. The phages are morphologically different and characterized by icosahedral heads and contractile (SIOΦ, SUBω, and SPOσ phages) or noncontractile (ARπ phage) tails. The genomes of SIOΦ and SUBω are composed of 154 kb. The capsid of SIOΦ is composed of four proteins. Bacteriophages SPOσ and ARπ have genome sizes of 25 kbp and 40 kbp, respectively. Both phages as well as SUBω phage have 14 proteins in their capsids. Phages SIOΦ and SPOσ are resistant to high temperatures and to the acid (4.0) and alkaline (9.0 and 10.0) pH.

1. Introduction

Recent investigations show that bacteriophages could be used as a means of controlling food-borne pathogens [1-3]. New phages are therefore being isolated and characterized [4, 5]. One of the bacterial genera with the highest prevalence in food industry, which could potentially be controlled by bacteriophages, is Bacillus, which belong to the heterogeneous group of Gram-positive, endospore-forming, facultative anaerobic bacteria [6, 7]. Despite the numerous advantages of Bacillus species in industry applications, they may also cause damage. The pathogenicity of Bacillus anthracis for mammals is well known, and other Bacillus species infections have been documented since the beginning of the last century [8, 9]. Bacillus cereus is considered a pathogenic species causing local infections, bacteremia, septicemia endocarditis and pericarditis, and infection of the central nervous system and respiratory tract [10-15]. Bacillus cereus is the main factor in food poisoning resulting from toxin production [16]. Beside the well-known pathogenic Bacillus species, recent studies have detected the production of enterotoxins and emetic toxin by B. subtilis, B. pumilus, and B. licheniformis, resulting in food-borne illnesses [17-19]. Bacillus subtilis contaminated 25% of samples of food products in The Netherlands (milk, yeast, flour, pasta products, cocoa, chocolate, bakery products, meat products, herbs, and spices) [20] and 12% of raw materials, dough and bread samples in South Africa [21]. Moreover, B. subtilis spore contamination has been found in wheat flour, ropy bread [22], and gelatin [23].

The removal of Bacillus contamination is limited due to its resistance to physicochemical decontaminations methods. Usually the food industry uses physical methods of sterilization or disinfection such as uv, gamma radiation, or high temperature, but, unfortunately, they are often not effective against the highly resistant Bacillus spores [24, 25]. One option for Bacillus contamination treatment could be phagotherapy [26].

Bacteriophages are the largest group of viruses [27, 28]. They are very useful for people in phage therapy [29]. On the other hand, preventive phage therapy may eliminate pathogenic bacteria from food products. Phages are host-specific and infect only specific species or strains [1] with a few exceptions [30]. Although investigations have shown that bacteriophages can aid in successful eradications of food-borne pathogens such as Listeria monocytogenes, Escherichia coli, Salmonella typhimurium, or Campylobacter [1, 31], there are few commercial products, such as LISTEX P100, which have received the GRAS status [32]. Thus, it is necessary to determine the criteria for the application of phages in the control of bacteria in food and therefore all newly isolated phages with the potential application in antibacterial therapy should be characterized in detail. Beside using isolated phages as decontamination agents, they could be used in bacterial detection and serotyping or strain improvement recently described by Petty et al. [33]. However, the commercial application of bacteriophages requires the optimization of culture conditions and detailed determination of the physical and chemical factors influencing phage viability [34, 35]. The first attempts to control Bacillus subtilis infections by phages were carried out by Ackermann et al. [36]. The results showed an extreme heterogeneity of B. subtilis strains. Ackermann's phagotype system was used by Inatsu et al. [37] for the differentiation of B. subtilis (natto) and other B. subtilis strains isolated from fermented soybean foods [38].

The aim of this work was to isolate and characterize Bacillus bacteriophages in view of their potential application in phagotyping, strain improvement, and eradication of unwanted Bacillus strains in food industries. We have isolated four bacteriophages with different specificity to 20 B. subtilis strains. Detailed data on their morphology, thermal and pH stability, genome size, and capsid protein mass are described for bacteriophages specified for four representative B. subtilis strains.

2. Materials and Methods

2.1. Bacillus Strains and Bacteriophages

The origins of bacteriophages used in this study as well as their host strains are shown in Table 1. Bacillus strains 10 (isolated from soil), SWV215 [39], B3 [40], and ATTC6633 [41] were used for detailed investigation (Table 1). Bacillus strains were maintained as frozen stocks at −80°C in 1.5%, nutrient broth (Biocorp, Poland) with 2% agar-agar (BioShop, Canada Inc) supplemented with 15% (v/v) of glycerol. For experiments, the strains were cultured on the nutrient agar and then cultured overnight in a liquid nutrient broth. The Bacillus subtilis-specific bacteriophages SUBω, SPOσ, SIOΦ (Acc. number KC699836), and ARπ were isolated from soil supplemented with a liter of Bacillus subtilis cultures. After a week, soil samples (1 g) were suspended in water, shaken (200 rpm/30 min), and centrifuged (4500 rpm/10 min), and the supernatant was filtered through a polyethersulfone (PES) 0.22 μm Millipore filter. Phage propagation was performed as follows: 45 mL of filtered soil samples and 5 mL culture of Bacillus strain grown overnight in nutrient broth were added to 20 mL of fresh nutrient broth and incubated for 24 h at 37°C. The suspension was centrifuged (4500 rpm/10 min) and the supernatant was filtered through a PES 0.22 μm Millipore filter. The bacteriophage titer in the filtrate was assessed using the double-agar layer technique of Adams [42].

Table 1

Bacillus subtilis strains and bacteriophages.

Number	Strain	Origin	Bacteriophage typing
			SUBω	SPOσ	SIOΦ	ARπ
1	B. subtilis ATCC 6633	Polish Academy of Sciences, Wroclaw	+	+	−	−
2	B. subtilis 168	Institute, Rijksuniversiteit Groningen, Holland	0	+	0	0
3	B. subtilis SWV215		+	+	−	−
4	B. subtilis 10	University of Wroclaw, Faculty of Biotechnology	−	−	+	−
5	B. subtilis B3	Wroclaw University of Environmental and Life Sciences, Faculty of Food Science	+	+	−	+
6	B. subtilis Ż7-mutant B3		+	+	−	+
7	B. subtilis Ż17-mutant B3		+	+	−	+
8	B. subtilis Ż25-mutant B3		+	+	−	+
9	B. subtilis Hb36-mutant B3		+	+	−	+
10	B. subtilis B20		0	+	−	0
11	B. subtilis P22		+	+	−	+
12	B. subtilis KT20		0	−	0	0
13	B. subtilis 172		+	+	−	+
14	B. subtilis B24		0	+	−	0
15	B. subtilis PCM1938	Polish Academy of Sciences, Wroclaw	+	+	−	−
16	B. subtilis PCM 2226		+	+	+	−
17	B. subtilis PCM 486		0	+	−	0
18	B. subtilis PCM 2189		+	+	−	−
19	B. subtilis PCM 2005		+	+	−	0
20	B. subtilis PCM 2224		+	+	−	−

(−) Plaques not formed, (+) distinct clear plaques, and (0) hazy plaques.

Phage stocks were prepared in nutrient broth and then stored at 4°C.

2.2. Electron Microscopy

A high-titer phage lysate filtered through a PES 0.22 μm Millipore filter was centrifuged at 25,000 ×g for 60 min, and the pellet was washed twice in ammonium acetate (0.1 M, pH 7.0). A portion of the resuspended sediment was deposited on carbon-coated Formvar films, stained with 1% uranyl acetate for 30 s, and examined in a Philips CM 100 (Philips CM 100, Japan) transmission electron microscope at 80 kV with 39,000x magnification. The phage size was determined from the average of five to seven independent measurements using T4 phage tail (114 nm) as the magnification control.

2.3. Thermal Treatment

The thermal resistance of all bacteriophages was determined at 23, 50, 60, 70, 80, 90, and 100°C in a temperature-controlled thermo-block (Labnet International. Inc.), at 121°C in an autoclave, at 4°C and −20°C in a standard refrigerator, and at −80°C in a low temperature freezer (REVCO Sanyo, Japan). Equal volumes of phage (107 pfu/mL in sterile water) were incubated for 1, 2, 5, 10, 15, 30, 60, and 180 min at 4°C and then placed in an ice bath or thawed. Samples were assayed to determine surviving pfu using the double-agar layer technique [42].

2.4. pH Treatment

The influence of pH on the bacteriophages was assayed in CP (citrate-phosphate) buffer (0.2 M Na2HPO4/0.1 M citrate) within the pH range of 2.0 to 8.0 and in carbonate buffer (0.2 M H2CO3/0.2 M NaHCO3) within the pH range of 9.0 to 11.0. Experiments were carried out at room temperature (25°C) for 1 and 6 h. Samples were assayed to determine pfu using the double-agar layer technique [42].

2.5. Host Range Determination

The host range of bacteriophages was assayed according to Yang et al. [43] as follows: 108 bacterial cells were mixed with molten 0.6% agar and the mixture was poured on 2% solid agar to make double layer agar plates. After solidification, 10 μL of bacteriophage (>106 pfu/mL) was spotted on each plate with each of the different Bacillus strains, incubated, and the presence of lysed plates was examined to determine host range.

2.6. Adsorption Rate, Latent Time, and Phage Burst Size

Experiments were performed as described previously [42, 44, 45] with slight modifications. Equal volume of phages (106–107 pfu/mL) was added to 0.9 mL of overnight cultures of host bacterial species and incubated at 37°C for 5 min. After incubation, the mixture was diluted to 10−5 and filtered through a PES 0.22 μm Millipore filter. The number of free phages in the filtrate was determined in duplicate, using the double-agar layer method.

To determine the phage latent time and burst size a one-step experiment was carried out according to the previous descriptions [46] with modifications. To 0.9 mL of overnight cultures of host bacteria was added 0.1 mL of the bacteriophage suspension. The bacteria were allowed to adsorb the bacteriophages for 5 min at 37°C; the mixture was diluted to 10−5 or 10−4 and further incubated for 135 min at 37°C. Samples were taken at 10 min intervals and phage titer was determined by the double layer-agar plate method. Burst size was calculated as the ratio of the final amount of liberated phage particles to the initial number of infected bacterial cells during the latent period [42].

2.7. Phage DNA Extraction

Phage particles were partially purified by PEG precipitation [47]. High titer suspensions (1010 pfu/mL) of filtered phage lysate were mixed with NaCl (1 M final conc.) and incubated on ice for 1.5 h. Then PEG 8000 was added to a final concentration of 10% and the mixture was incubated on ice for 2.5 h. This was followed by the centrifugation of precipitated phages (10 000 g, 4°C, 20 min). Pellets were suspended in 10 mM TE buffer (pH 8.0) or TM buffer (10 mM Tris-HCl, 100 mM NaCl, 10 mM MgCl2; pH 7.4). The residual PEG and bacterial debris were next removed by gentle extraction for 30 s with an equal volume of chloroform, followed by centrifugation at 3000 ×g, 4°C for 15 min.

2.8. Pulsed-Field Gel Electrophoresis PFGE

Determination of bacteriophage genome size by PFGE was performed according to Lingohr et al. [48]. Purified phage particles in 10 mM TE buffer (pH 8.0) were incorporated in 1 : 1 proportion into 2% low-melting agarose in 10 mM TE. The solid gel plugs were incubated for 2.5 h at 54°C in 1 mL of phage lysis buffer containing 50 mM pH 8.0 Tris-HCl, 50 mM EDTA, 1% (w/v) SDS, and 100 μg/mL (final conc.) of proteinase K (phages SUBω, SPOσ, SIOΦ) or 1 mg/mL of proteinase K (phage ARπ). The plugs were washed at least 4 times in 10 mM Tris/EDTA buffer (TE, pH 8.0) and pulsed-field gel electrophoresis (PFGE) was performed (Bio-Rad, UK) in 1% agarose in 0.5X TBE buffer (pH 8.3). The PFGE parameters were as follows: 0.5X TBE buffer; 6 V/cm, initial switch time 1 s; final switch time 15 s; run time 16 h; temperature 12°C. Gels were stained with ethidium bromide followed by destaining in miliQ water. The genome size was determined with BioRad Quantity One software, using the Low Range PFG marker (New England BioLabs, UK) as a standard.

2.9. Preparation of Phage Structural Proteins and SDS-PAGE

Concentrated phage particles in TM buffer were extracted with chloroform (1 : 1 v/v) and, after gentle mixing, were centrifuged at 3000 ×g, 4°C for 15 min. Partly purified phage particles in the aqueous phase were pelleted by ultra-centrifugation (Beckman Coulter) at 50 000 rpm at 4°C for 60 min. The pellets were resuspended in 1X Laemmli loading buffer (62.5 mM Tris-HCl, 2% SDS (w/v), 5% β-mercaptoethanol (v/v), 10% glycerol (v/v), 0.04% (w/v) bromophenol blue; pH 6.8), boiled for 5 min, and separated on the SDS-PAGE 12% gel. All gels were run at 40 mA using a mini Protean apparatus (BioRad) and Laemmli buffer. Gels were stained with Gel Code Blue stain reagent (Thermo Scientific). Biorad Quantity One software was used for the molecular analysis of the phage structural proteins based upon a PageRuler prestained protein ladder plus (Fermentas).

2.10. Statistical Analysis

All experiments were performed at least in triplicate. For the statistical analysis of data obtained, Microsoft Excel 2007 (SD and t-test) and R (ANOVA) programs were applied. Standard deviation was included in figures. Statistical significance was determined using Student's t-test. The significance level was set at P < 0.05.

3. Results

3.1. Phage Isolation

Bacillus subtilis-specific bacteriophages were isolated from soil inoculated with four distinct (isolated from different locations) B. subtilis strains: 10, B3, ATTC 6633, and SWV215. All isolated phages formed clear plaques with the strains used for isolation. Phage titers ranged from 1010 for SUBω and SPOσ to 1013 for SIOΦ (Table 2).

Table 2

Phage titers (pfu/mL) for B. subtilis strains.

Phage	SIOΦ	SUBω	SPOσ	ARπ
Bacillus strain	B. subtilis 10	B. subtilis ATCC 6633	B. subtilis SWV215	B. subtilis  B3
Phage titer(pfu/mL)	1013	1010	1010	1012

3.2. Phage Typing

Twenty Bacillus subtilis strains were used to determine the specificity of the four isolated bacteriophages: SUBω, SPOσ, SIOΦ, and ARπ (Table 1). Phage SUBω infected all Bacillus strains tested with the exception of B. subtilis 10. For B. subtilis 168, B20, KT20, B24, and PCM 486 the resulting plaques were hazy. Phage SPOσ did not form plaques with B. subtilis 10 and KT20 strains, but formed distinct clear plaques with all other strains. Phage SIOΦ formed plaques with B. subtilis strains 168, 10, KT20, and PCM 2226 but clear plaques were observed only with Bacillus strains 10 and PCM 2226. Phage ARπ did not form plaques with strains ATCC 6633, SWV215, 10, PCM1938, PCM 2226, PCM 2189, and PCM 2224. Clear plaques were observed for P22 and 172 strains and for B3 and its mutants (Table 1).

3.3. Phage Morphology

The phages belonged to two morphotypes. Three phages (SIOΦ, SUBω, and SPOσ) were classified to Myoviridae because of the appearance of icosahedral heads and contractile tails with necks, collars, and base plates (Figures 1(a), 1(b), and 1(c)). Phage head and tail length also indicated relationship to the Myoviridae (Table 3).

Figure 1

Transmission electron microscopic images of (a) B. subtilis 10 phage SIOΦ, (b) B. subtilis ATCC 6633 phage SUBω, (c) B. subtilis SWV215 phage SPOσ, and B. subtilis B3 phage ARπ.

Table 3

Particle sizes of SIOΦ, SUBω, SPOσ, and ARπ phages.

Host	Phage	Head diameter[nm × nm]	Tail length[nm]
B. subtilis 10	SIOΦ	100 × 90	208
B. subtilis ATCC 6633	SUBω	67 × 67	223
B. subtilis SWV215	SPOσ	91 × 87	70
B. subtilis B3	ARπ	41 × 47	342

Bacteriophage ARπ had icosahedral heads and noncontractile, long tails (Figure 1(d), Table 3) and is thus morphologically similar to phages belonging to Siphoviridae family.

3.4. Thermal and pH Stability Test

The thermal stability test was carried out to determine the heat resistance of tested phages at pH 7.0. All phages were stable after 180 min at −80°C, −20°C, 4°C, 23°C, 30°C, 37°C, and 50°C, and all phages retained 100% infection activity after a 1 min incubation at 90°C, 100°C, and 121°C (data not shown). An ANOVA test was done and the interaction between the types of phage tested parameters was found statistically important. Thus, it can be said that the inactivation rate of the phages varies for different types of phages.

Phage SIOΦ lost total activity after 2 min at 80°C, 30 min at 70°C, and at 60°C only 1% of original activity was observed after a 3 h incubation period. Phage SUBω lost its infective ability after 1 min at 80°C, 5 min at 70°C, and 180 min at 60°C. Phage SPOσ was inactive after 2 min at 80°C, 15 min at 70°C, and 60 min at 60°C, respectively. Phage ARπ lost its activity after 2 min at 80°C, 10 min at 70°C, and 3 hours at 60°C (Figures 2(a), 2(b), 2(c), and 2(d)).

Figure 2

Thermal stability test of phages: (a) SIOΦ, (b) SUBω, (c) SPOσ, and (d) ARπ.

Optimal pH was determined by testing the stability of phages at different pH after 60 min (data not shown) and 6 h of incubation at room temperature (25°C). After 1-hour incubation at pH 2.0 all tested phages lost infective ability. Statistically significant differences between tested phages were found. Phage SPOσ seems to be extremely stable in the pH range 6.0–8.0; after a 6 h incubation the SPOσ activity was reduced from 107 to 104 pfu/mL at pH 3.0 and pH 4.0 (Figure 3(c)). At alkaline pH of 10.0 and pH 11.0 the activity was reduced by one order of magnitude (Figure 3(c)).

Figure 3

pH stability test of phages: (a) SIOΦ, (b) SUBω, (c) SPOσ, and (d) ARπ. Data are the means from three independent experiments +SD.

Bacteriophage ARπ was the most sensitive to acid and alkaline conditions and only showed 100% activity at pH 7.0 and pH 8.0 (Figure 3(d)). Similar results were observed after only 1 hour incubation (data not shown).

Phages SIOΦ and SUBω had 100% activity in the pH range of 6.0–8.0 and SIOΦ had reduced activity at pH 4.0, 5.0, and 9.0 from 107 to 102, 103, and 103, respectively (Figures 3(a) and 3(b)).

Phage SIOΦ was the most active in the adsorption (50%) to the B. subtilis 10 strain. The one-step growth curve of SIOΦ indicated that the latent period was 55–65 min and the estimated burst size was ~74 phage particles per infected bacterial cell (Table 4). Phage SPOσ was less active. It was adsorbed by only 7.5% of the B. subtilis SWV215 strain. The latent period of SPOσ was 75–85 min and the estimated burst size was ~23 phage particles per infected bacterial cell (Table 4). The latent periods of phages SUBω and ARπ were the same as that of phage SIOΦ, but the adsorption was lower (12%) and growth times were shorter (30 min). A difference between phages SUBω and ARπ was observed in their burst size: for SUBω it was only ~8 phage particles per infected bacterial cell while for ARπ it was ~37 phage particles (Table 4).

Table 4

Biological characteristics of SIOΦ, SUBω, SPOσ, and ARπ phages.

Phage	Adsorption [%]	Burst size [pfu/mL]	Latent period [min]	Growth time [min]
SIOΦ	50	∼74	55–65	40
SUBω	12	∼8	55–65	30
SPOσ	7.5	∼23	75–85	40
ARπ	12	∼37	55–65	30

3.5. Phage Genome Size Estimated by PFGE

The size of the intact genomic DNA of the four phages in this study was estimated by pulse-field electrophoresis (PFGE). For phages SIOΦ, SUBω, and SPOσ belonging to Myoviridae family the size of their genomes was, respectively, 154, 154, and 25 kbp (Figure 4). The genome size of Arπ, the only phage from Siphoviridae family, was 40 kbp (Figure 4). The determined genome size values are comparable with values estimated by ICTV for the indicated phage families.

Figure 4

Pulsed-field gel electrophoresis of undigested phage DNAs. Genome sizes were estimated by using Low Range PFG marker (M).

3.6. Protein Composition

SDS-PAGE was used to determine the content of structural proteins of phage particles. Virions of phages SIOΦ, SUBω, and SPOσ contained structural proteins with predominant protein bands corresponding, respectively, to ~52 kDa (SIOΦ), ~45, 31 kDa (SUBω), and 45 kDa (SPOσ) (Figure 5). Phage ARπ contained at least 14 structural proteins and was found to produce three major protein bands at molecular masses of approximately 42, 37, and 31 kDa (Figure 5).

Figure 5

SDS-polyacrylamide gel electrophoretic analysis of indicated virion proteins estimated by using PageRuler prestained protein ladder plus (M).

4. Discussion

Bacillus has a high prevalence in nature and ability to form heat-resistant endospores; hence it is difficult to eradicate it from, for example, fermented food, and the constant presence of beneficial microorganisms is critical to maintaining the expected food quality. Bacteriophages are host-specific natural enemies of bacteria and the efficient eradication of bacterial pathogens with the use of phages is an effective way to control harmful bacteria [2, 49].

Bacteriophages may have distinct applications, such as biocontrol (eradication) of unwanted species (strains), improvement (selection) of strains used for production, and strain typing. All these applications depend on phage specificity [50]. Both a wide and a narrow host range may be useful. While a rather narrow host range will enable distinction of closely related strains in strain typing, a rather wide host range will be beneficial for biocontrol. In comparison to biocontrol, application of bacteriophages for improvement and selection of industrial strains has been poorly described. In fact, it is well known that in a large-scale production phage infection may lead to the collapse of the production, as it was in the case of acetone-butanol fermentation [51]. Thus, in industrial practice either various strains are used every month or a cocktail of strains is used for inoculum. Rotation of strains with various resistance decreases the risk of accumulation of bacteriophages infecting producer strain in industrial environment [52].

We found four bacteriophages with different specificity toward twenty Bacillus subtilis strains (Table 1). The classification of bacteriophages is in most cases based on morphological criteria and rarely on molecular data, for example, nucleotide sequence homology [53]. Considering the morphology, 96% of all bacteriophages belong to the order Caudovirales and this order is subdivided into three families: the Myoviridae (25%), characterized by a contractile tail; the Siphoviridae (61%) with a noncontractile tail; and the Podoviridae (14%) with a short, noncontractile tail [54, 55]. In 2009 the International Committee on the Taxonomy of Viruses (ICTV) proposed the creation the Myoviridae subfamily Spounavirinae with genera of SPO1-like viruses and Twort-like viruses and eight phage species [56]. Recently, Klumpp et al. [57] proposed a revision of current taxonomic organization of the family Myoviridae and evaluated new members of this group. In this work we isolated three phages, SIOΦ, SUBω, and SPOσ, which morphologically belong to the Myoviridae family and phage ARπ which is classified in the Siphoviridae family (Figure 1). The genomes of SIOΦ and SUBω are 154 kbp each and are similar to the other phages of Bacillus subtilis such as SPO1 (145.7 kbp), SP8, SP82G, H1, 2C, Φe, or Φ25 (~150) [57]. SIOΦ has only four capsid proteins like the ΦH-like viruses; however, viruses of the ΦH type have a mere 59 kbp genome [58]. Bacteriophage SPOσ has a genome size of 25 kbp and ~14 capsid proteins and these features allow it to fall into the group of P2-like or Mu-like viruses but, unfortunately, viruses in this class have Gram-negative bacteria as hosts [58]. ARπ phage genome is sized 40 kbp and it has ~14 capsid proteins. On the basis of these characteristics it can be classified as N15-like virus but the very long tail (342 nm) excludes it from the known classification [58]. The bacteriophages with the longest tails in Siphoviridae family belong to ΦM1-like viruses (210 nm) and their tail is terminated with a knob as in ARπ phage.

The use of bacteriophages in biotechnological processes requires the knowledge of their characteristics such as the host range, latent period, growth time, or the resistance to stress conditions, for example, different temperatures or pH. Temperature plays a crucial role in bacteriophage survival, capacity for attachment, and the length of the latent period [59]. SIOΦ, SUBω, SPOσ, and ARπ bacteriophages retain a stable activity following 3 hours at temperatures ranging from −80°C to 50°C (Figure 2). Phages SIOΦ, SPOσ, and ARπ proved to be resistant to high temperatures and all of them survive after 2 min at 80°C, 5 min or longer at 70°C, and 180 min (except for 60 min for SPOσ) at 60°C (Figure 2). In general, members of Myoviridae and Siphoviridae families are considered to be resistant to large temperature fluctuations [35].

Acidity and alkalinity of the environment are other important factors influencing phage stability. SIOΦ and SPOσ phages are the most resistant to acid (4.0) and alkaline (9.0 and 10.0) pH; ARπ phage is the least resistant to pH fluctuations. The optimum pH values for all investigated phages were 7.0 and 8.0 (Figure 3). Lasobras et al. [60] have suggested that members of Siphoviridae family are the most resistant to adverse conditions. However, phage Arπ, which we morphologically classified as a member of Siphoviridae, is only active in a narrow pH range (6.0–8.0).

Bacteriophage SIOΦ had the highest percent adsorption to the Bacillus host (50%) and released the largest number of particles (~74) from host cells (Table 4) and its phage titer was the highest (1013) (Table 2). Due to high activity at low and high temperature and pH, SIOΦ seems to be the best candidate for use in industry.

The literature contains many descriptions of experiments conducted under different conditions and hence with varying results. Some Bacillus subtilis phages such as SP02c1 or SP82 have a higher percent of adsorption than our phages [61] while, on the other hand, phage SPO1 has the same burst size as SIOΦ [62].

At least one of the characterized isolated bacteriophages was lytic for each tested strain of Bacillus subtilis. Thus, they could be suitable for the phagotyping of this bacterial species.