Literature DB >> 26235717

Comparison of peri-implant bone formation around injection-molded and machined surface zirconia implants in rabbit tibiae.

Hong-Kyun Kim1, Kyung Mi Woo, Won-Jun Shon, Jin-Soo Ahn, Seunghee Cha, Young-Seok Park.   

Abstract

The aim of this study was to compare osseointegration and surface characteristics of zirconia implants made by the powder injection molding (PIM) technique against those made by the conventional milling procedure in rabbit tibiae. Surface characteristics of 2 types of implants were evaluated. Sixteen rabbits received 2 types of external hex implants with similar geometry, either machined zirconia implants or PIM zirconia implants, in the tibiae. Removal torque tests and histomorphometric analyses were performed. The roughness of the PIM zirconia implants was higher than that of machined zirconia implants. The PIM zirconia implants exhibited significantly higher bone-implant contact and removal torque values than the machined zirconia implants (p<0.001). The osseointegration of the PIM zirconia implant is promising, and PIM, using the roughened mold etching technique, can produce substantially rougher surfaces on zirconia implants.

Entities:  

Mesh：

Substances：

Year:  2015        PMID： 26235717      PMCID： PMC5559725          DOI： 10.4012/dmj.2015-024

Source DB:  PubMed          Journal:  Dent Mater J        ISSN： 0287-4547            Impact factor:   2.102


  41 in total

1.  Mechanical anchorage and peri-implant bone formation of surface-modified zirconia in minipigs.

Authors:  Henning Schliephake; Thomas Hefti; Falko Schlottig; Philippe Gédet; Henning Staedt
Journal:  J Clin Periodontol       Date:  2010-06-21       Impact factor: 8.728

2.  Enhanced osteoblast function on ultraviolet light-treated zirconia.

Authors:  Wael Att; Masato Takeuchi; Takeo Suzuki; Katsutoshi Kubo; Masakazu Anpo; Takahiro Ogawa
Journal:  Biomaterials       Date:  2008-12-18       Impact factor: 12.479

3.  Peri-implant bone formation and surface characteristics of rough surface zirconia implants manufactured by powder injection molding technique in rabbit tibiae.

Authors:  Young-Seok Park; Shin-Hye Chung; Won-Jun Shon
Journal:  Clin Oral Implants Res       Date:  2012-04-04       Impact factor: 5.977

Review 4.  Electrical implications of corrosion for osseointegration of titanium implants.

Authors:  R A Gittens; R Olivares-Navarrete; R Tannenbaum; B D Boyan; Z Schwartz
Journal:  J Dent Res       Date:  2011-05-09       Impact factor: 6.116

5.  Phase stabilization in nitrogen-implanted nanocrystalline cubic zirconia.

Authors:  Gonghua Wang; Guangfu Luo; Yun Liang Soo; Renat F Sabirianov; Hong-Ji Lin; Wai-Ning Mei; Fereydoon Namavar; Chin Li Cheung
Journal:  Phys Chem Chem Phys       Date:  2011-10-04       Impact factor: 3.676

6.  Stability of prototype two-piece zirconia and titanium implants after artificial aging: an in vitro pilot study.

Authors:  Ralf-Joachim Kohal; Hans Christian Finke; Gerold Klaus
Journal:  Clin Implant Dent Relat Res       Date:  2008-09-09       Impact factor: 3.932

7.  Titanium deposition in regional lymph nodes after insertion of titanium screw implants in maxillofacial region.

Authors:  D Weingart; S Steinemann; W Schilli; J R Strub; U Hellerich; J Assenmacher; J Simpson
Journal:  Int J Oral Maxillofac Surg       Date:  1994-12       Impact factor: 2.789

8.  Evaluation of nano-technology-modified zirconia oral implants: a study in rabbits.

Authors:  Jaebum Lee; Janet H Sieweke; Nancy A Rodriguez; Peter Schüpbach; Håkan Lindström; Cristiano Susin; Ulf M E Wikesjö
Journal:  J Clin Periodontol       Date:  2009-07       Impact factor: 8.728

9.  Peri-implant bone formation of non-thermal atmospheric pressure plasma-treated zirconia implants with different surface roughness in rabbit tibiae.

Authors:  Won-Jun Shon; Shin Hye Chung; Hong-Kyun Kim; Geum-Jun Han; Byeong-Hoon Cho; Young-Seok Park
Journal:  Clin Oral Implants Res       Date:  2013-02-13       Impact factor: 5.977

Review 10.  Zirconia as a ceramic biomaterial.

Authors:  C Piconi; G Maccauro
Journal:  Biomaterials       Date:  1999-01       Impact factor: 12.479
View more
  6 in total

Review 1.  Zirconia surface modifications for implant dentistry.

Authors:  Fernanda H Schünemann; María E Galárraga-Vinueza; Ricardo Magini; Márcio Fredel; Filipe Silva; Júlio C M Souza; Yu Zhang; Bruno Henriques
Journal:  Mater Sci Eng C Mater Biol Appl       Date:  2019-01-16       Impact factor: 7.328

2.  Osseointegration of a novel injection molded 2-piece ceramic dental implant: a study in minipigs.

Authors:  Geninho Thomé; Rebecca Sandgren; Sergio Bernardes; Larissa Trojan; Nils Warfving; Benjamin Bellón; Benjamin E Pippenger
Journal:  Clin Oral Investig       Date:  2020-09-10       Impact factor: 3.573

Review 3.  Biomimetic Implant Surfaces and Their Role in Biological Integration-A Concise Review.

Authors:  Mariana Brito Cruz; Neusa Silva; Joana Faria Marques; António Mata; Felipe Samuel Silva; João Caramês
Journal:  Biomimetics (Basel)       Date:  2022-06-06

Review 4.  Surface Structure of Zirconia Implants: An Integrative Review Comparing Clinical Results with Preclinical and In Vitro Data.

Authors:  Nadja Rohr; Blerta Hoda; Jens Fischer
Journal:  Materials (Basel)       Date:  2022-05-20       Impact factor: 3.748

Review 5.  Effect of Zirconia Dental Implant Surfaces on Bone Integration: A Systematic Review and Meta-Analysis.

Authors:  Ali Hafezeqoran; Roodabeh Koodaryan
Journal:  Biomed Res Int       Date:  2017-02-16       Impact factor: 3.411

6.  Clinical and radiographic success of injection-molded 2-piece zirconia implants submitted to immediate loading: A 12-month report of two cases.

Authors:  Geninho Thomé; Jean Uhlendorf; Camila Pereira Vianna; Waleska Caldas; Sergio Rocha Bernardes; Larissa Carvalho Trojan
Journal:  Clin Case Rep       Date:  2021-12-04
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.