Literature DB >> 25232556

Cranioplasty with custom made alloplastic prosthetic implant: A case report.

Lokendra Gupta1, In Aparna1, Dhanasekar Balakrishnan1, Lingeshwar Deenadayalan1, Puneeth Hegde1, Priyanka Agarwal1.   

Abstract

Cranial defects often occur due to trauma. The treatment of such defects is a challenge to the skill and knowledge of the practitioner. This article presents one such case, where a 15-year-old boy had suffered extensive loss of the right cranium following a road traffic accident. The patient required rehabilitation of the right fronto-temporal cranial anatomy and was managed using a custom made heat polymerized acrylic alloplastic implant.

Entities:  

Keywords:  Acquired defect; Cranial implant; Cranioplasty; Heat cure poly methyl methacrylate resin

Year:  2014        PMID: 25232556      PMCID: PMC4163775          DOI: 10.12998/wjcc.v2.i9.482

Source DB:  PubMed          Journal:  World J Clin Cases        ISSN: 2307-8960            Impact factor:   1.337


  25 in total

Review 1.  Alloplastic cranial implants made from computed tomographic scan-generated casts.

Authors:  M C van Putten; S Yamada
Journal:  J Prosthet Dent       Date:  1992-07       Impact factor: 3.426

2.  Form-fitting plastic cranioplasty.

Authors:  W T SPENCE
Journal:  J Neurosurg       Date:  1954-05       Impact factor: 5.115

3.  Preformed titanium cranioplasty after resection of skull base meningiomas - a technical note.

Authors:  Karl-Michael Schebesch; Julius Höhne; Holger G Gassner; Alexander Brawanski
Journal:  J Craniomaxillofac Surg       Date:  2013-02-21       Impact factor: 2.078

4.  Technique for cranioplasty prosthesis fabrication.

Authors:  R D Jordan; J T White; N Schupper
Journal:  J Prosthet Dent       Date:  1978-08       Impact factor: 3.426

5.  Cranioplasty using polymethyl methacrylate implant constructed from an alginate impression and wax elimination technique.

Authors:  Ae Abdulai; Mi Iddrissu; Tk Dakurah
Journal:  Ghana Med J       Date:  2006-03

6.  Cranioplasty using polymethyl methacrylate prostheses.

Authors:  Sai-Cheung Lee; Chieh-Tsai Wu; Shih-Tseng Lee; Po-Jen Chen
Journal:  J Clin Neurosci       Date:  2009-01       Impact factor: 1.961

7.  Fracture toughness of denture base acrylics.

Authors:  G D Stafford; R Huggett; B E Causton
Journal:  J Biomed Mater Res       Date:  1980-07

8.  Cranioplasty using acrylic material: a new technical procedure.

Authors:  Luigi Chiarini; Sabina Figurelli; Giuseppe Pollastri; Elio Torcia; Francesca Ferrari; Massimo Albanese; Pier Francesco Nocini
Journal:  J Craniomaxillofac Surg       Date:  2004-02       Impact factor: 2.078

9.  Craniofacial reconstruction with computer-generated HTR patient-matched implants: use in primary bony tumor excision.

Authors:  Barry L Eppley
Journal:  J Craniofac Surg       Date:  2002-09       Impact factor: 1.046

10.  Cranial implant problems.

Authors:  H Sabin
Journal:  J Prosthet Dent       Date:  1975-12       Impact factor: 3.426

View more
  1 in total

1.  Rapid prototyping technology for cranioplasty: A case series.

Authors:  Ashish Thakur; Dushyant Chauhan; M Viswambaran; R K Yadav; Dhruv Sharma
Journal:  J Indian Prosthodont Soc       Date:  2019 Apr-Jun
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.