Estimation of the absolute shear stiffness of human lung parenchyma using (1) H spin echo, echo planar MR elastography.

PURPOSE: To develop a rapid proton MR elastography (MRE) technique that can quantify the absolute shear stiffness of lung parenchyma, to investigate the ability to differentiate respiration-dependent stiffness variations of the lung, and to demonstrate clinical feasibility.
MATERIALS AND METHODS: A spin-echo echo planar imaging MRE sequence (SE-EPI MRE) with a very short echo time was developed and tested in a series of five healthy volunteers at three different lung volumes: (i) residual volume (RV), (ii) total lung capacity (TLC), (iii) and midway between RV and TLC (MID). At each volume, lung density was quantified using a MR-based density mapping sequence. For reference, data were acquired using the previously described spin-echo lung MRE sequence (SE-MRE). MRE data were also acquired in a patient with proven Idiopathic Pulmonary Fibrosis (IPF) to test clinical feasibility.
RESULTS: The SE-EPIMRE sequence reduced total acquisition time by a factor of 2 compared with the SE-MRE sequence. Lung parenchyma median shear stiffness for the 5 volunteers quantified with the SE-EPI MRE sequence was 0.9 kPa, 1.1 kPa, and 1.6 kPa at RV, MID, and TLC, respectively. The corresponding values obtained with the SE-MRE sequence were 0.9 kPa, 1.1 kPa, and 1.5 kPa. Absolute shear stiffness was also successfully measured in the IPF patient.
CONCLUSION: The results indicate that stiffness variations due to respiration could be measured with the SE-EPIMRE technique and were equivalent to values generated by the previously described SE-MRE approach. Preliminary data obtained from the patient demonstrate clinical feasibility.