Literature DB >> 18604612

Dynamic particle image velocimetry study of the aortic flow field of contemporary mechanical bileaflet prostheses.

Toshinosuke Akutsu1, Jun Saito, Ryota Imai, Tomoyuki Suzuki, Xiu Dong Cao.   

Abstract

The characteristics of mechanical bileaflet valves, the leaflets of which open at the outside first, differ significantly from those of natural valves, whose leaflets open at the center first, and this fact affects the flow field down-stream of the valves. The direction of jet-type flows, which is influenced by this difference in valve features, and the existence of the sinus of Valsalva both affect the flow field inside the aorta in different ways, depending on the valve design. There may also be an influence on the coronary circulation, the entrance to which resides inside the sinus of Valsalva. A dynamic particle image velocimetry (PIV) study was conducted to analyze the influence of the design of prosthetic heart valves on the aortic flow field. Three contemporary bileaflet prostheses, the St. Jude Medical (SJM) valve, the On-X valve (with straight leaflets), and the MIRA valve (with curved leaflets), were tested inside a simulated aorta under pulsatile flow conditions. A dynamic PIV system was employed to analyze the aortic flow field resulting from the different valve designs. The two newer valves, the On-X and the MIRA valves, open more quickly than the SJM valve and provide a wider opening area when the valve is fully open. The SJM valve's outer orifices deflect the flow during the accelerating flow phase, whereas the newer designs deflect the flow less. The flow through the central orifice of the SJM valve has a lower velocity compared to the newer designs; the newer designs tend to have a strong flow through all orifices. The On-X valve generates a simple jet-type flow, whereas the MIRA valve (with circumferentially curved leaflets) generates a strong but three-dimensionally diffuse flow, resulting in a more complex flow field downstream of the aortic valve. The clinically more adapted 180 degrees orientation seems to provide a less diffuse flow than the 90 degrees orientation does. The small differences in leaflet design in the bileaflet valves generate noticeable differences in the aortic flow; the newer valves show strong flows through all orifices.

Mesh:

Year:  2008        PMID: 18604612     DOI: 10.1007/s10047-008-0410-y

Source DB:  PubMed          Journal:  J Artif Organs        ISSN: 1434-7229            Impact factor:   1.731


  9 in total

1.  Three-dimensional flow analysis of a mechanical bileaflet mitral prosthesis.

Authors:  Toshinosuke Akutsu; Takashi Masuda
Journal:  J Artif Organs       Date:  2003       Impact factor: 1.731

2.  THE ANATOMY OF THE MITRAL VALVE AND ITS ASSOCIATED STRUCTURES.

Authors:  L A DUPLESSIS; P MARCHAND
Journal:  Thorax       Date:  1964-05       Impact factor: 9.139

3.  Surgical correction of aortic insufficiency.

Authors:  C A HUFNAGEL; W P HARVEY; P J RABIL; T F McDERMOTT
Journal:  Surgery       Date:  1954-05       Impact factor: 3.982

4.  Time-resolved particle image velocimetry and laser doppler anemometry study of the turbulent flow field of bileaflet mechanical mitral prostheses.

Authors:  Toshinosuke Akutsu; Takamasa Fukuda
Journal:  J Artif Organs       Date:  2005       Impact factor: 1.731

5.  Two-dimensional dynamic simulation of platelet activation during mechanical heart valve closure.

Authors:  S Krishnan; H S Udaykumar; J S Marshall; K B Chandran
Journal:  Ann Biomed Eng       Date:  2006-09-30       Impact factor: 3.934

6.  Unsteady fluid dynamics of several mechanical prosthetic heart valves using a two component laser Doppler anemometer system.

Authors:  T Akutsu; V J Modi
Journal:  Artif Organs       Date:  1997-10       Impact factor: 3.094

7.  An artificial arterial system for pumping hearts.

Authors:  N Westerhof; G Elzinga; P Sipkema
Journal:  J Appl Physiol       Date:  1971-11       Impact factor: 3.531

8.  Shear-induced activation of platelets.

Authors:  J M Ramstack; L Zuckerman; L F Mockros
Journal:  J Biomech       Date:  1979       Impact factor: 2.712

9.  A 5 1/2 year experience with the St. Jude Medical cardiac valve prosthesis. Early and late results of 737 valve replacements in 671 patients.

Authors:  E M Baudet; C C Oca; X F Roques; M N Laborde; A S Hafez; M A Collot; I M Ghidoni
Journal:  J Thorac Cardiovasc Surg       Date:  1985-07       Impact factor: 5.209

  9 in total
  6 in total

1.  Flow visualization for different port angles of a pulsatile ventricular assist device.

Authors:  Eiki Akagawa; Hwansung Lee; Eisuke Tatsumi; Akihiko Homma; Tomonori Tsukiya; Yoshiyuki Taenaka
Journal:  J Artif Organs       Date:  2011-10-30       Impact factor: 1.731

2.  Near valve flows and potential blood damage during closure of a bileaflet mechanical heart valve.

Authors:  L H Herbertson; S Deutsch; K B Manning
Journal:  J Biomech Eng       Date:  2011-09       Impact factor: 2.097

3.  Numerical comparison of the closing dynamics of a new trileaflet and a bileaflet mechanical aortic heart valve.

Authors:  Chi-Pei Li; Po-Chien Lu
Journal:  J Artif Organs       Date:  2012-06-13       Impact factor: 1.731

4.  Influence of three mechanical bileaflet prosthetic valve designs on the three-dimensional flow field inside a simulated aorta.

Authors:  Toshinosuke Akutsu; Akira Matsumoto
Journal:  J Artif Organs       Date:  2010-10-07       Impact factor: 1.731

Review 5.  Journal of Artificial Organs 2008: the year in review.

Authors:  Y Sawa; E Tatsumi; A Funakubo; T Horiuchi; K Iwasaki; A Kishida; T Masuzawa; K Matsuda; M Nishimura; T Nishimura; Y Tomizawa; T Yamaoka; H Watanabe
Journal:  J Artif Organs       Date:  2009-03-29       Impact factor: 1.731

6.  Transcatheter aortic valves produce unphysiological flows which may contribute to thromboembolic events: An in-vitro study.

Authors:  Andrea Ducci; Francesco Pirisi; Spyridon Tzamtzis; Gaetano Burriesci
Journal:  J Biomech       Date:  2016-11-03       Impact factor: 2.712

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.