Literature DB >> 1813395

Failures and complications in 391 consecutively inserted fixed prostheses supported by Brånemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup.

T Jemt1.   

Abstract

A total of 391 edentulous maxillae and mandibles was consecutively treated with routine fixed prostheses, supported by 2,199 implants. The patients were followed for 1 year; the overall success rate was 99.5% and 98.1% for the prostheses and implants, respectively. The number of severe complications was low, but it was possible to identify a significantly higher ratio of problems in the maxillae throughout the observation period than for the mandibles. While many problems occurred in both the maxillae and mandibles, there were also problems more typical for each jaw. Diction and fractures of resin teeth were more common problems in maxillae; cheek and lip biting was a more frequent postinsertion complication in the treatment of mandibles. Most problems were easily resolved, and the retrievability of the prostheses was of great advantage.

Entities:  

Mesh:

Substances:

Year:  1991        PMID: 1813395

Source DB:  PubMed          Journal:  Int J Oral Maxillofac Implants        ISSN: 0882-2786            Impact factor:   2.804


  51 in total

1.  Evaluation of fit of cement-retained implant-supported 3-unit structures fabricated with direct metal laser sintering and vacuum casting techniques.

Authors:  Raquel Castillo Oyagüe; Andrés Sánchez-Turrión; José Francisco López-Lozano; Javier Montero; Alberto Albaladejo; María Jesús Suárez-García
Journal:  Odontology       Date:  2011-11-11       Impact factor: 2.634

2.  Prosthetic misfit of implant-supported prosthesis obtained by an alternative section method.

Authors:  Rodrigo Tiossi; Hilmo Barreto Leite Falcão-Filho; Fábio Afrânio de Aguiar; Renata Cristina Silveira Rodrigues; Maria da Gloria Chiarello de Mattos; Ricardo Faria Ribeiro
Journal:  J Adv Prosthodont       Date:  2012-05-30       Impact factor: 1.904

Review 3.  Management of abutment screw loosening: review of literature and report of a case.

Authors:  Vinod Krishnan; C Tony Thomas; Ipe Sabu
Journal:  J Indian Prosthodont Soc       Date:  2013-10-25

Review 4.  Passive Fit in Screw Retained Multi-unit Implant Prosthesis Understanding and Achieving: A Review of the Literature.

Authors:  Muaiyed Mahmoud Buzayan; Norsiah Binti Yunus
Journal:  J Indian Prosthodont Soc       Date:  2013-12-28

5.  Implant fracture under dynamic fatigue loading: influence of embedded angle and depth of implant.

Authors:  Hiroaki Suzuki; Yoshiaki Hata; Fumihiko Watanabe
Journal:  Odontology       Date:  2015-12-23       Impact factor: 2.634

6.  Analysis of fit on implants of chrome cobalt versus titanium frameworks made by cad / cam milling.

Authors:  Begoña Oteiza-Galdón; Amparo Martínez-González; Ángel-Vicente Escuder
Journal:  J Clin Exp Dent       Date:  2020-10-01

7.  Influence of prosthetic screw material on joint stability in passive and non-passive implant-supported dentures.

Authors:  Aloísio Oro Spazzin; Guilherme Elias Pessanha Henriques; Mauro Antônio de Arruda Nóbilo; Rafael Leonardo Xediek Consani; Lourenço Correr-Sobrinho; Marcelo Ferraz Mesquita
Journal:  Open Dent J       Date:  2009-12-30

8.  Abrasion of abutment screw coated with TiN.

Authors:  Seok-Won Jung; Mee-Kyoung Son; Chae-Heon Chung; Hee-Jung Kim
Journal:  J Adv Prosthodont       Date:  2009-07-31       Impact factor: 1.904

9.  Peri-implantitis and the prosthodontist.

Authors:  A Dawood; B Marti Marti; S Tanner
Journal:  Br Dent J       Date:  2017-09-08       Impact factor: 1.626

10.  Experimental study on the factors affecting torque of beam-type implant torque wrenches.

Authors:  Hiroki Shiba; Yuji Sato; Junichi Furuya; Tokiko Osawa; Akio Isobe; Myu Hayashi; Noboru Kitagawa
Journal:  BMC Oral Health       Date:  2021-07-15       Impact factor: 2.757

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.