Literature DB >> 16961188

The effects of proteins on the friction and lubrication of artificial joints.

S C Scholes1, A Unsworth.   

Abstract

The tribological testing of artificial hip and knee joints in the laboratory has been ongoing for several decades. This work has been carried out in an attempt to simulate the loading and motion conditions applied in vivo and, therefore, the potential for the success of the joint. However, several different lubricants have been used in these tests. The work documented in this paper compares results obtained using different lubricants and makes suggestions for future work. Hip joints and knee joints of different material combinations were tested in a friction simulator to determine their friction and lubrication properties. Both carboxymethyl cellulose (CMC) fluids and bovine serum (with CMC fluids added) were used as the lubricants. These were prepared to various viscosities to produce the Stribeck plots. Human synovial fluid, of just one viscosity, was used as the lubricant with some of the joints to give a true comparison with physiological lubricants. The results showed that, in most cases, the lubricant had a significant effect on the friction developed between the joint surfaces. This is thought to be due to the proteins that are present within the bovine serum adsorbing to the bearing surfaces, creating 'solid-like' films which rub together, protecting the surfaces from solid-to-solid contact. This would be beneficial in terms of wear but can either increase or decrease the friction between the contacting surfaces. It is important to simulate the conditions in vivo as closely as possible when testing these joints to try to obtain a better comparison between the joints and to simulate more accurately the way that these joints will operate in the body. In an attempt to simulate synovial fluid, bovine serum seems to be the most popular lubricant used at present. It would be beneficial, however, to develop a new synthetic lubricant that more closely matches synovial fluid. This would allow us to predict more accurately how these joints would operate long-term in vivo.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16961188     DOI: 10.1243/09544119JEIM21

Source DB:  PubMed          Journal:  Proc Inst Mech Eng H        ISSN: 0954-4119            Impact factor:   1.617


  13 in total

1.  [Principles of tribological analysis of endoprostheses].

Authors:  J P Kretzer; C Zietz; C Schröder; J Reinders; L Middelborg; A Paulus; R Sonntag; R Bader; S Utzschneider
Journal:  Orthopade       Date:  2012-10       Impact factor: 1.087

2.  Wear in total knee arthroplasty--just a question of polyethylene?: Metal ion release in total knee arthroplasty.

Authors:  Jan Philippe Kretzer; Joern Reinders; Robert Sonntag; Sebastien Hagmann; Marcus Streit; Sebastian Jeager; Babak Moradi
Journal:  Int Orthop       Date:  2013-11-12       Impact factor: 3.075

3.  How do gait frequency and serum-replacement interval affect polyethylene wear in knee-wear simulator tests?

Authors:  Jörn Reinders; Robert Sonntag; Jan Philippe Kretzer
Journal:  J Mater Sci Mater Med       Date:  2014-07-12       Impact factor: 3.896

4.  Wear-corrosion synergism in a CoCrMo hip bearing alloy is influenced by proteins.

Authors:  Mathew T Mathew; Joshua J Jacobs; Markus A Wimmer
Journal:  Clin Orthop Relat Res       Date:  2012-11       Impact factor: 4.176

5.  CoCrMo metal-on-metal hip replacements.

Authors:  Yifeng Liao; Emily Hoffman; Markus Wimmer; Alfons Fischer; Joshua Jacobs; Laurence Marks
Journal:  Phys Chem Chem Phys       Date:  2013-01-21       Impact factor: 3.676

6.  Retrieval analysis of alumina ceramic-on-ceramic bearing couples.

Authors:  Muhammad Korim; Susan Scholes; Anthony Unsworth; Richard Power
Journal:  Acta Orthop       Date:  2014-04       Impact factor: 3.717

7.  Rapid prototyping for in vitro knee rig investigations of prosthetized knee biomechanics: comparison with cobalt-chromium alloy implant material.

Authors:  Christian Schröder; Arnd Steinbrück; Tatjana Müller; Matthias Woiczinski; Yan Chevalier; Patrick Weber; Peter E Müller; Volkmar Jansson
Journal:  Biomed Res Int       Date:  2015-03-24       Impact factor: 3.411

8.  Postoperative changes in in vivo measured friction in total hip joint prosthesis during walking.

Authors:  Philipp Damm; Alwina Bender; Georg Bergmann
Journal:  PLoS One       Date:  2015-03-25       Impact factor: 3.240

9.  Explant analysis of the Biomet Magnum/ReCap metal-on-metal hip joint.

Authors:  S C Scholes; B J Hunt; V M Richardson; D J Langton; E Smith; T J Joyce
Journal:  Bone Joint Res       Date:  2017-02       Impact factor: 5.853

10.  Tribo-biological deposits on the articulating surfaces of metal-on-polyethylene total hip implants retrieved from patients.

Authors:  Zhiwei Cui; Yi-Xing Tian; Wen Yue; Lei Yang; Qunyang Li
Journal:  Sci Rep       Date:  2016-06-27       Impact factor: 4.379

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.