Active acoustic control in gradient coils for MRI.

The new principles of active acoustic control in gradient coil design recently introduced by Mansfield and Haywood (MAGMA 1999;8(Suppl 1):55) are further developed theoretically for the far-field acoustic output for a single sector of a coil system comprising four or more flat rectangular coil sectors. Each sector consists of a split plate arrangement in which are embedded two windings, an outer primary winding and a narrow inner re-entrant loop control winding immediately adjacent to and surrounding the split or air gap. The wire spacing of the control winding is made small so as not to affect substantially the magnetic field created by the primary winding. Experimental results are presented for two sectors each made of a different readily available plastic material and tested over a range of frequencies. They both show substantial average reductions in acoustic output over the full output when the control winding is appropriately driven. New theoretical expressions are derived for particular frequencies based on normal mode expansions for the plate. This new approach is better able to explain the acoustic output difference between the full and reduced output modes. Empirical expressions are also developed which include longitudinal as well as transverse plate characteristics and used to fit the experimental acoustic output data as a function of frequency and indicate good agreement with regard to both the form and amplitude of the acoustic output response. Copyright 2001 Wiley-Liss, Inc.