Representing within-session response rates proportionally and entirely.

In this technical article, methods for collecting and representing response rates maintained by schedules of reinforcement are presented. First, the time in a session that each important event (e.g., responses, reinforcers) occurs is collected and stored by a computer. Another computer program is used, then, to convert each response to a percentage of the total responses in a session and to plot these percentages cumulatively as a function of the time in the session that they occurred. In this manner, response rates may be expressed proportionally (i.e., using the same y-axis scale regardless of absolute response rate) without requiring the arbitrary selection of an interval over which responses are aggregated and expressed relative to the entire-session rate. A property of these records is that deviations in the slope of the obtained record from the diagonal, which connects (x, y) = (start of session, 0%) to (x, y) = (end of session, 100%), occurring at any point and for any duration, represent changes in the local response rate from the entire-session rate. This method of representing ongoing responding is illustrated by several records of key pecking of a pigeon on a variable-interval 60-s schedule of food reinforcement. Relative local response rates were also computed from these data at several levels of resolution (i.e., the time over which responses were aggregated), including the level typically employed by those interested in within-session changes in response rates.