Literature DB >> 8653827

Thermal latency in radiofrequency ablation.

F H Wittkampf1, H Nakagawa, W S Yamanashi, S Imai, W M Jackman.   

Abstract

BACKGROUND: Progression of unintentionally induced atrioventricular delay is occasionally observed directly after termination of radiofrequency delivery in the vicinity of the atrioventricular node. We postulated that the application of a radiofrequency pulse may result in a tissue temperature rise that continues after the pulse. METHODS AND
RESULTS: Using the thigh muscle preparation, 5-, 10-, 20-, and 30-second pulses were applied as 30 to 40 W via a standard 4-mm tip electrode with 10-g contact pressure. Forty-one undisturbed pulses were delivered while recording intramural temperatures at 2-, 4-, and 7-mm depth. Maximal "thermal latency" was observed with the shortest pulse duration and at greatest depth. With 5-second applications, tissue temperature at 7-mm depth peaked 11.6 seconds after termination of radiofrequency delivery and stayed above end-of-pulse value as long as 34.5 seconds after the pulse. The additional rise in tissue temperature was 2.9 degrees C. If only recording within the lesion border zone were considered, the duration of latency was maximal with 10-second pulses: an additional gain in tissue temperature of 3.4 degrees C was observed 6.4 seconds after the pulse while tissue temperature stayed above end-of-pulse value during 18.3 seconds.
CONCLUSIONS: With relatively short applications, tissue temperature continues to rise after termination of radiofrequency delivery. This "thermal latency" may result in lesion growth after the pulse and may so explain the incidentally observed progression of conduction block after short pulses in the vicinity of the atrioventricular node. It also may explain the apparent discrepancy between lesion growth rate and intramural temperature rise studies.

Entities:  

Mesh:

Year:  1996        PMID: 8653827     DOI: 10.1161/01.cir.93.6.1083

Source DB:  PubMed          Journal:  Circulation        ISSN: 0009-7322            Impact factor:   29.690


  7 in total

1.  Precision test apparatus for evaluating the heating pattern of radiofrequency ablation devices.

Authors:  I Chang; B Beard
Journal:  Med Eng Phys       Date:  2002-11       Impact factor: 2.242

2.  Interrelation of tissue temperature versus flow velocity in two different kinds of temperature controlled catheter radiofrequency energy applications.

Authors:  S Grumbrecht; J Neuzner; H F Pitschner
Journal:  J Interv Card Electrophysiol       Date:  1998-06       Impact factor: 1.900

Review 3.  Coronary artery pathophysiology after radiofrequency catheter ablation: review and perspectives.

Authors:  Adam Castaño; Thomas Crawford; Masatoshi Yamazaki; Uma Mahesh R Avula; Jérôme Kalifa
Journal:  Heart Rhythm       Date:  2011-07-06       Impact factor: 6.343

4.  Homogeneity and diameter of linear lesions induced with multipolar ablation catheters: in vitro and in vivo comparison of pulsed versus continuous radiofrequency energy delivery.

Authors:  A Erdogan; S Grumbrecht; J Carlsson; H Roederich; B Schulte; J Sperzel; A Berkowitsch; J Neuzner; H F Pitschner
Journal:  J Interv Card Electrophysiol       Date:  2000-12       Impact factor: 1.900

5.  Assessment of hyperbolic heat transfer equation in theoretical modeling for radiofrequency heating techniques.

Authors:  Juan A López-Molina; Maria J Rivera; Macarena Trujillo; Fernando Burdío; Juan L Lequerica; Fernando Hornero; Enrique J Berjano
Journal:  Open Biomed Eng J       Date:  2008-04-10

6.  Radiofrequency induced lesion characteristics according to force-time integral in experimental model.

Authors:  You Mi Hwang; Woo Seok Lee; Kee-Joon Choi; Yoo Ri Kim
Journal:  Medicine (Baltimore)       Date:  2021-03-12       Impact factor: 1.817

7.  Systematic Characterization of High-Power Short-Duration Ablation: Insight From an Advanced Virtual Model.

Authors:  Argyrios Petras; Zoraida Moreno Weidmann; Massimiliano Leoni; Luca Gerardo-Giorda; Jose M Guerra
Journal:  Front Med Technol       Date:  2021-11-12
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.