Warning: Undefined array key "mm" in /www/wwwroot/www.ai-bt.com/si.php on line 10 Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in /www/wwwroot/www.ai-bt.com/si.php on line 10 Loosening of the femoral component in surface replacement of the knee.

Literature DB >> 727908

Loosening of the femoral component in surface replacement of the knee.

J Colley, H U Cameron, M A Freeman, S A Swanson.

Abstract

The incidence of loosening of the femoral component of the ICLH knee has been found to be lower than that of the tibial component. This is thought to be due to the fact that the compressive strength of the distal femur has been found to be greater than that of the proximal tibia. It has further been shown that the strength of even the femur can be so reduced by the osteoporosis accompanying Rheumatoid Arthritis that it becomes insufficient for adequate prosthetic fixation.

Entities: Disease

Mesh：

Substances：
Bone Cements

Year: 1978 PMID： 727908 DOI： 10.1007/bf00381637

Source DB: PubMed Journal: Arch Orthop Trauma Surg ISSN： 0344-8444

6 in total

1. Mechanical and physiological properties of bone.

Authors: L Klenerman; S A Swanson; M A Freeman
Journal: Proc R Soc Med Date: 1967-09

2. A comparison of osteotomy and joint replacement in the surgical treatment of the arthritic knee.

Authors: M A Freeman; J Bargren; I Miller
Journal: Arch Orthop Unfallchir Date: 1977-04-22

3. Total replacement of the knee design considerations and early clinical results.

Authors: M A Freeman; S A Swanson; R C Todd
Journal: Acta Orthop Belg Date: 1973 Jan-Feb Impact factor: 0.500

4. ICLH arthroplasty of the knee: 1968--1977.

Authors: M A Freeman; R C Todd; P Bamert; W H Day
Journal: J Bone Joint Surg Br Date: 1978-08

5. Mechanical tests on the tibial components of non-hinged knee prostheses.

Authors: J H Bargren; W H Day; M A Freeman; S A Swanson
Journal: J Bone Joint Surg Br Date: 1978-05

6. The production and biology of polyethylene wear debris.

Authors: P A Revell; B Weightman; M A Freeman; B V Roberts
Journal: Arch Orthop Trauma Surg Date: 1978-05-30

6 in total

5 in total

Loosening of the femoral component in surface replacement of the knee.

1. Mechanical and physiological properties of bone.

2. A comparison of osteotomy and joint replacement in the surgical treatment of the arthritic knee.

3. Total replacement of the knee design considerations and early clinical results.

4. ICLH arthroplasty of the knee: 1968--1977.

5. Mechanical tests on the tibial components of non-hinged knee prostheses.

6. The production and biology of polyethylene wear debris.

1. Bone strength measurements at the proximal tibia. Penetration tests and epiphyseal compressive strength.

2. Dual-photon absorptiometry of the proximal tibia.

3. Cancellous bone at the knee: a comparison of two methods of strength measurement.

4. Mechanical failure modes in total knee replacement.

5. Review of a failed knee replacement and some observations on the design of a knee resurfacing prosthesis.