Comparing shoulder maneuvers to magnetic resonance imaging and arthroscopic findings in patients with supraspinatus tears.

BACKGROUND: Shoulder maneuvers and magnetic resonance imaging (MRI) are performed to diagnose supraspinatus tendon tears regardless of arthroscopy exam. Although there are many studies on this subject, there is a lack of studies comparing the sensitivity (Se) and specificity (Sp) of shoulder maneuvers and MRI to arthroscopic findings (intact, partial, or full thickness supraspinatus tendon tear). AIM: To compare the diagnostic values of shoulder maneuvers with MRI for supraspinatus tendon tears in patients undergoing shoulder arthroscopy.
METHODS: A total of 199 consecutive patients from four orthopedic centers met the eligibility criteria of shoulder pain persisting for at least four weeks. They were prospectively enrolled in this study from April 2017 to April 2019. Seven clinical tests (full can, empty can, drop arm, Hawkins', painful arc, Neer's sign and resisted external rotation) and MRI were performed, and all were compared with surgical findings. Full can, empty can and resisted external rotation tests were interpreted as positive in the case of pain and/or weakness. We assessed the Se, Sp, accuracy, positive predictive value (PPV) and negative predictive value (NPV), positive and negative likelihood ratio and diagnostic odds ratio for overall, partial and full-thickness supraspinatus tears.
RESULTS: MRI had the highest Se for overall (0.97), partial (0.91) and full-thickness (0.99) tears; moreover, MRI had the highest NPV: 0.90, 0.88 and 0.98 for overall, partial and full-thickness tears, respectively. For overall supraspinatus tears, the Se and PPV were: Painful arc (Se = 0.85/PPV = 0.91), empty can (pain) (Se = 0.80/PPV = 0.89), full can (pain) (Se = 0.78/PPV = 0.90), resisted external rotation (pain) (Se = 0.48/PPV = 0.87), drop arm (Se = 0.19/PPV = 0.97), Neer's sign (Se = 0.78/PPV = 0.93) and Hawkins' (Se = 0.80/PPV = 0.88). MRI had the highest PPV (0.99). The Hawkin's test had the highest false positive rate in patients with intact tendons (0.36). The Sp of the empty can and full can (both tests positive for pain and weakness), drop arm and MRI were: 0.93, 0.91, 0.98 and 0.96, respectively. For partial and full-thickness tears, the empty can test (positive for pain and weakness) had a Sp of 0.93, and the drop arm and MRI had the same Sp (0.98).
CONCLUSION: Physical examination demonstrated good diagnostic value, the drop arm test had a Sp as good as MRI for supraspinatus tears; however, MRI was more accurate in ruling out tears. The Hawkins' test had high false-positive findings in patients with intact tendons. ©The Author(s) 2022. Published by Baishideng Publishing Group Inc. All rights reserved.

Core Tip: Shoulder maneuvers and magnetic resonance imaging (MRI) are performed to diagnose supraspinatus tendon tears regardless of arthroscopy exam. The shoulder maneuvers are useful for diagnosing supraspinatus tears in patients for whom surgery is being considered; however, they showed limited values in ruling out tears compared with MRI. Moreover, some shoulder maneuvers had high false-positive findings in patients with intact tendons.

INTRODUCTION

Several shoulder maneuvers have been described and performed on patients undergoing shoulder arthroscopy; however, previous studies have shown that only the empty can and full can tests accurately diagnose supraspinatus tears[1]. Moreover, other studies demonstrated that the drop arm test has the highest specificity (Sp) for supraspinatus tears[2].

For diagnostic confirmation of clinical findings, magnetic resonance imaging (MRI) has been used to evaluate rotator cuff tears (RCTs). MRI showed high sensitivity (Se) and Sp for full thickness tears; however, poor Se for detecting partial tears[3]. Moreover, MRI is valuable in surgical planning of RCTs, allowing a detailed assessment of the tear size and muscle atrophy[4-7].

Systematic reviews point out limitations in the accuracy studies of clinical tests and imaging exams for diagnosing RCTs, and these reviews suggested new research with improved methodological standards[3,8-10]. The main weakness identified was the lack of standardization of the clinical tests, small sample size, absence of blinded evaluators, long time interval between the index tests and arthroscopy, retrospective method evaluation and the use of MRI as a reference standard instead of arthroscopy[3,9].

Although the literature is extensive on this subject, there is a lack of studies that compared the Se and Sp of shoulder maneuvers and MRI for supraspinatus tears. Therefore, the aim of this study was to evaluate the diagnostic values of seven clinical tests and MRI for supraspinatus tears in patients undergoing shoulder arthroscopy. We hypothesized that clinical tests will be as specific as MRI in diagnosing supraspinatus tendon tears.

MATERIALS AND METHODS

Study design

We carried out a prospective multicenter accuracy study at four orthopedic centers (Sao Paulo Hospital, Christóvão da Gama Hospital and Maternity, Wladimir Arruda Hospital and the Japanese-Brazilian Beneficent Hospital of São Paulo) from April 2017 to April 2019. The study was approved by an institutional review board under registration number 1662/2016 and registered on the ISRCTN registry platform (ID: ISRCTN13083925 – https://doi.org/10.1186/ISRCTN13083925)[11,12].

The inclusion criteria were patients who had an indication of arthroscopy for RCTs with symptoms of shoulder pain for at least 4 wk. The patients included in this study underwent shoulder maneuvers, MRI and arthroscopy; some of these patients were treated with physiotherapy for RCTs between the physical examination and arthroscopy. Patients excluded were those with adhesive capsulitis, glenohumeral osteoarthritis, or shoulder instability, three months after the physical examination, MRI and arthroscopy.

The following demographic information was obtained: Gender, age, symptoms duration (months), side involved, dominance of the affected limb, and history of previous shoulder trauma. Moreover, the time between the index tests (shoulder maneuvers and MRI) and the reference standard (arthroscopy) was evaluated.

Physical examination

Seven clinical tests (full can, empty can, drop arm, resisted external rotation, Hawkins’, painful arc, and Neer’s sign) were independently performed by four experienced orthopedic shoulder surgeons, in all patients sequentially, following a random order according to the choice of each evaluator and were not always performed in the same order. These tests were chosen based on previously published studies that evaluated the diagnostic values of the shoulder maneuvers for RCTs. The empty can, full can, Hawkin’s painful arc and Neer’s sign were standardized according to their original description; the drop arm and resisted external rotation tests, according to the description in the study by Hanchard et al[9]. Before the start of the study, all four evaluators underwent training to standardize the technique and the positivity criteria of the shoulder maneuvers, in a sample of patients who were not included in this study. Clinical tests were conducted following an average interval of two minutes between each maneuver and a goniometer was used to measure the angles in the limb assessed. The evaluators were blinded to any previous clinical examination and imaging exams but had access to the history and demographic data of the patients. Only one shoulder surgeon assessed each patient.

The seven clinical tests were performed as described below:

Empty can test: With the arm at a position of 90˚ of abduction in the scapula plane and internal rotation (thumb pointing down), the patient was asked to isometrically resist a downward pressure applied by the examiner[13].

Full can test: With the arm at 90˚ of abduction in the plane of the scapula and external rotation (thumb pointing up), the patient was asked to resist a downward pressure applied by the examiner isometrically[14].

Drop arm test: The patient elevated the arm above 90˚ of abduction, using a goniometer, passively by the examiner; the support was removed, and the patient attempted to lower the arm actively in the plane of abduction. This maneuver was considered positive if the patient did not hold the position or if the arm dropped abruptly when lowering the arm in the coronal plane[9,15].

Resisted external rotation test: The patient stands, elbow at side and flexed at 90˚, shoulder in neutral rotation, and then asked to externally rotate the shoulder maximally against the tester’s isometric resistance, applied at the wrist[9].

Hawkins’ test: The upright patient’s arm was passively positioned at 90˚ of shoulder and 90˚ of elbow flexion. The examiner then forced an internal rotation of the patient’s shoulder. The test was considered positive if pain was reported[16].

Neer’s sign: The tester passively elevated the patient’s arm in the plane of the scapula, preventing scapular movement by holding with the other hand. The test was considered positive if pain occurred during the elevation[17].

Painful arc: The patient actively elevates the shoulder to full elevation, and then lowers it in the scapula plane. The test was interpreted positively if pain was reported during elevation, lowering, or both, between 60˚ and 120˚[18].

The muscle strength of empty can, full can and resisted external rotation was manually measured and interpreted positively if the patient was unable to overcome the resistance imposed by the examiner or if the strength decreased in relation to the contralateral side[1]. If weakness was observed, the test was interpreted as positive. The pain was not graduated, and any level of pain when performing the maneuver was considered positive. The empty can, full can and resisted external rotation tests were interpreted as positive in the case of pain and/or weakness.

MRI

MRI results were evaluated by two blinded musculoskeletal radiologists, who had no prior information on the patient’s physical examination. The radiologists evaluated each MRI together and there was a consensus on diagnosis of the lesions. MRI was performed using 3.0 Tesla devices, and the shoulder was placed in a dedicated receive-only shoulder coil. The supraspinatus was evaluated in the axial, oblique coronal, and oblique sagittal planes, at 4 to 5-mm section thickness. The sequences performed were two T1-weighted planes centered on the rotator cuff muscles: The axial plane, covering from the greater tubercle of the humerus to the spinal edge of the scapula, and the oblique sagittal plane, covering the tuberosity to the medial third of the scapula. In T2-weighted imaging, three acquisition planes were chosen: The axial plane, from the top of the acromioclavicular joint to the lower recess of the glenohumeral joint; oblique coronal plane, parallel to the supraspinatus and covering the entire scapular-humeral joint; and the oblique sagittal plane, perpendicular to the supraspinatus, from the distal end of the tendon to the middle part of the rotator cuff muscle belly. The supraspinatus was classified as intact tendon, partial or full-thickness tears according to the fluid signal intensity in T2-weighted coronal and sagittal scans.

Arthroscopy

Arthroscopy was the reference standard and was performed by two experienced orthopedic shoulder surgeons. The principal surgeon was involved in the clinical history and the preoperative physical examination; the assistant was blinded to all the clinical tests and MRI. All patients were placed in the lateral decubitus position with an anterior pad and another in the back, under general anesthesia, and a brachial plexus block. Eleven pounds of balanced suspension was used with the arm in 30˚ to 45˚ of abduction and 30˚ to 45˚ of forward flexion, and posterior inclination of the back to leave the glenoid parallel with the horizontal. The standard posterior portal was used to evaluate the supraspinatus tendon from the articular side. Through the lateral portal, the tendon was assessed from the subacromial space with a 30˚ arthroscope. A probe was used to identify tears, and the supraspinatus tendon was classified as intact, partial or full-thickness tears.

Sample size

The sample size was calculated assuming that the Se was 0.90, the prevalence of RCTs in the general population was 22%, a confidence interval (CI) of 95% with a marginal error of 0.10, resulting in a sample size of at least 157 patients[19-21].

Statistical analysis

The clinical tests and MRI results were compared with the surgical findings of arthroscopy to analyze the diagnostic values. Statistical analysis included the Se, Sp, positive predictive value (PPV), negative predictive value (NPV), accuracy, diagnostic odds ratio (DOR), and likelihood ratio[22]. These ratios were used to predict overall, partial and full-thickness tears. The Se and Sp are presented with the 95%CI. Tests were performed using SPSS software (ver. 25 for Mac; IBM Corp., New York, United States).

RESULTS

A total of 720 patients were consecutively seen at four orthopedic centers, 213 had an indication for shoulder arthroscopy and were included. Fourteen patients were excluded because the period between the performance of the index tests (shoulder maneuvers and MRI) and arthroscopy was greater than three months, and 199 patients met enrollment criteria for the final analysis. Demographic data were collected and are shown in Table 1.

Table 1

Demographic data of the patients studied, median and standard deviation are shown

Patient variables (n = 213)	Statistic n (%)
Median age (yr)	47.4; SD = 13.2; range 19 to 76
Symptoms duration (mo)	21.2; range 1 to 144
Gender
Male	123 (57.7)
Female	90 (42.3)
Laterality
Right	131 (61.5)
Left	82 (38.5)
Dominant arm
Dominant	129 (60.5)
Non-dominant	84 (39.4)
History of previous trauma
Yes	73 (34.3)
No	140 (65.7)

A total of 47 intact tendons, 62 partial tears (32 bursal-side and 30 articular-side tears) and 90 full-thickness tears (70 supraspinatus, 20 supraspinatus and infraspinatus tears) were found during arthroscopy. The arthroscopy was performed within a mean of 37 d (range, 1 to 83 d) after the physical examination and within 55 d (range, 4 to 89 d) after MRI.

MRI had the highest Se for overall tears (Table 2) (Se = 0.97). Among the clinical tests, the painful arc had the highest Se (Se = 0.85) and the empty can (positive for pain and weakness) had the best performance (DOR = 40). The drop arm test had the highest Sp (0.98), whereas the Sp for MRI for diagnosis of supraspinatus tears was 0.96. The shoulder maneuvers presented low values to rule out tears and the empty can test had the highest NPV between the physical examinations (0.70). The drop arm test and MRI had the highest PPV (0.97 and 0.99, respectively).

Table 2

Diagnostic values for overall tears

Test	Se	95%CI	Sp	95%CI	Ac	PPV	NPV	LR +	LR -	DOR
Painful arc	0.85	0.79-0.90	0.73	0.60-0.84	0.83	0.91	0.60	3.22	0.20	16.27
Empty can
P	0.80	0.71-0.87	0.82	0.69-0.90	0.81	0.89	0.68	4.35	0.24	17.78
P and W	0.75	0.63-0.84	0.93	0.81-0.98	0.82	0.94	0.70	10.75	0.27	40.00
Full can
P	0.78	0.69-0.85	0.81	0.68-0.90	0.79	0.90	0.63	4.15	0.27	15.26
P and W	0.63	0.50-0.74	0.91	0.78-0.96	0.74	0.91	0.63	6.76	0.41	16.53
Resisted external rotation
P	0.48	0.39-0.57	0.84	0.71-0.92	0.59	0.87	0.43	3.01	0.62	4.87
P and W	0.40	0.31-0.50	0.95	0.85-0.99	0.58	0.95	0.43	8.89	0.62	14.25
Drop arm	0.19	0.13-0.25	0.98	0.89-1.00	0.37	0.97	0.26	9.21	0.83	11.10
Neer’s sign	0.78	0.71-0.84	0.82	0.69-0.90	0.79	0.93	0.53	4.26	0.27	15.92
Hawkins’	0.80	0.73-0.85	0.65	0.51-0.77	0.77	0.88	0.49	2.30	0.31	7.53
MRI	0.97	0.93-0.99	0.96	0.86-0.99	0.97	0.99	0.90	23.76	0.03	752

Se: Sensitivity; Sp: Specificity; Ac: Accuracy; PPV: Positive predictive value; NPV: Negative predictive value; LR +: Positive likelihood ratio; LR -: Negative likelihood ratio; DOR: Diagnostic odds ratio; CI: Confidence interval; P: Positive for pain; W: Positive for weakness; MRI: Magnetic resonance imaging.

The false positive results for overall tears were: Painful arc (0.28), empty can (pain = 0.19/pain and weakness = 0.08), full can (pain = 0.19/pain and weakness = 0.11), resisted external rotation (pain = 0.20/pain and weakness = 0.06), drop arm (0.04), Neer’s sign (0.19), Hawkin’s (0.36), and MRI (0.02).

For partial tears (Table 3), MRI had the highest Se (0.91); however, MRI had the same Sp (0.98) as the drop arm test. For full thickness tears (Table 4), the empty can test (positive for pain and weakness) had a Se = 0.84; Sp of the drop arm was 0.98, and the MRI had a Se = 0.99 and Sp = 0.98.

Table 3

Diagnostic values for partial tears

Test	Se	95%CI	Sp	95%CI	Ac	PPV	NPV	LR +	LR -	DOR
Painful arc	0.78	0.66-0.86	0.75	0.61-0.85	0.76	0.81	0.70	3.10	0.30	10.40
Empty can
P	0.74	0.61-0.84	0.82	0.69-0.90	0.78	0.81	0.75	4.06	0.31	12.99
P and W	0.70	0.55-0.81	0.93	0.81-0.98	0.81	0.91	0.75	10.00	0.32	30.77
Full can
P	0.72	0.59-0.82	0.81	0.68-0.90	0.76	0.82	0.71	3.84	0.34	11.10
P and W	0.57	0.41-0.71	0.91	0.79-0.96	0.75	0.84	0.71	6.12	0.48	12.80
Resisted external rotation
P	0.43	0.32-0.55	0.84	0.71-0.92	0.61	0.78	0.52	2.70	0.67	4.01
P and W	0.25	0.15-0.39	0.95	0.85-0.99	0.58	0.87	0.52	5.61	0.78	7.18
Drop arm	0.09	0.04-0.18	0.98	0.89-1.00	0.46	0.86	0.43	4.30	0.93	4.62
Neer’s sign	0.72	0.60-0.81	0.83	0.70-0.91	0.76	0.86	0.68	4.30	0.34	12.63
Hawkins’	0.73	0.61-0.82	0.67	0.52-0.78	0.70	0.75	0.64	2.19	0.40	5.44
MRI	0.91	0.81-0.96	0.98	0.89-1.00	0.94	0.98	0.88	42.59	0.09	444.67

Se: Sensitivity; Sp: Specificity; Ac: Accuracy; PPV: Positive predictive value; NPV: Negative predictive value; LR +: Positive likelihood ratio; LR -: Negative likelihood ratio; DOR: Diagnostic odds ratio; CI: Confidence interval; P: Positive for pain; W: Positive for weakness; MRI: Magnetic resonance imaging.

Table 4

Diagnostic values for full-thickness tears

Test	Se	95%CI	Sp	95%CI	Ac	PPV	NPV	LR +	LR -	DOR
Painful arc	0.91	0.84-0.95	0.75	0.61-0.85	0.86	0.91	0.75	3.64	0.12	30.00
Empty can
P	0.86	0.73-0.94	0.82	0.69-0.90	0.84	0.81	0.87	4.70	0.17	28.15
P and W	0.84	0.65-0.94	0.93	0.81-0.98	0.90	0.87	0.91	12.04	0.17	70
Full can
P	0.85	0.72-0.92	0.81	0.68-0.90	0.83	0.82	0.85	4.54	0.18	24.76
P and W	0.72	0.52-0.86	0.91	0.78-0.96	0.84	0.82	0.85	7.74	0.31	25.07
Resisted external rotation
P	0.56	0.41-0.70	0.84	0.71-0.92	0.71	0.74	0.70	3.51	0.52	6.71
P and W	0.58	0.43-0.72	0.95	0.85-0.99	0.77	0.92	0.70	12.79	0.44	29.17
Drop arm	0.25	0.18-0.35	0.98	0.89-1.00	0.49	0.96	0.39	12.12	0.76	15.88
Neer’s sign	0.83	0.74-0.89	0.83	0.70-0.91	0.83	0.91	0.70	4.97	0.21	24.12
Hawkins’	0.85	0.76-0.91	0.67	0.52-0.78	0.79	0.84	0.68	2.54	0.23	11.20
MRI	0.99	0.95-1.00	0.98	0.89-1.00	0.98	0.99	0.98	46.35	0.01	3266

Se: Sensitivity; Sp: Specificity; Ac: Accuracy; PPV: Positive predictive value; NPV: Negative predictive value; LR +: Positive likelihood ratio; LR -: Negative likelihood ratio; DOR: Diagnostic odds ratio; CI: Confidence interval; P: Positive for pain; W: Positive for weakness; MRI: Magnetic resonance imaging.

DISCUSSION

This study demonstrated the significance of clinical tests for the diagnosis of supraspinatus tears in patients with an indication for shoulder arthroscopy. The Sp of the drop arm test for supraspinatus tears was similar to that of MRI. On the other hand, the physical examination demonstrated limited diagnostic value in ruling out tears when compared to MRI.

The strengths of this study were the inclusion of a consecutive and representative sample of patients; experienced shoulder surgeons performed the physical examination; the technique was standardized, and the positivity criterion for each clinical test was fulfilled. Therefore, we demonstrated that trained orthopedists could perform clinical tests with high Sp for the diagnosis of supraspinatus tears[3,23-27]. Moreover, arthroscopy was utilized as a reference standard, a minimally invasive surgical procedure that is the gold standard for diagnosis and is widely used to treat RCTs[1]. Through arthroscopy, the evaluator can inspect and probe the partial articular and bursal-side tears, assess the rotator cuff footprint accurately and perform a general examination of the shoulder joint in order to identify and treat associated rotator cuff lesions[3].

To standardize shoulder maneuvers is challenging due to the high variability in performance and interpretation. The empty can test, for example, adopts the interpretative criteria of pain, muscle weakness, or both, affecting Se and Sp, as demonstrated in this study[8,9]. Muscle weakness was previously demonstrated in other studies as a reliable criterion, and in our study, the pain associated with weakness obtained the highest Sp[1,28]. We observed that many patients with supraspinatus tears had pain associated with weakness, demonstrating that pain can be a cause for functional disability when performing the test[1,28], as described by Jobe et al[13,29].

The empty can, full can and resisted external rotation tests showed improved results when positive for pain and weakness. Positivity only for pain in these tests had better Se, but less Sp; the positivity only for muscle weakness occurred in just a few cases and it was not possible to perform statistical analysis for this specific positivity criterion. The diagnostic values of these three clinical tests were calculated according to positivity only for pain and pain associated with weakness.

Another methodological criterion adopted here was establishing a time limit between physical examination, MRI and arthroscopy, a criterion little used in other accuracy studies and cited as one of the weaknesses in systematic reviews[3,9]. In this study, we choose a three-month interval between the index tests and arthroscopy, to reduce the interpretation bias, different to that in other studies[5,30-33]. The ideal would be to carry out the index tests and arthroscopy in the same day or week; however, we chose the limit of three months, mainly due to the logistics of the orthopedic centers included in the study, as there is a waiting list for these procedures[34].

We demonstrated high Sp and PPV of the drop arm test, unlike Somerville et al[33], who mentioned that no clinical test in isolation is sufficient to diagnose RCTs. Our results showed that the drop arm test is valuable for confirming overall supraspinatus tears (PPV = 0.97). The drop arm test had a similar Sp to MRI for supraspinatus tears; however, one factor contributing to the high Sp of these clinical tests was the possible association of supraspinatus and infraspinatus tears in patients included in this study.

Physical examination has already been demonstrated in previous studies as limited in ruling out RCTs[1,33]. The limitations of the shoulder maneuvers for excluding supraspinatus tears were also shown in our study; moreover, the painful arc and Hawkins’ tests had the highest false-positive rates in patients with intact tendons.

Physical examination alone cannot quantify the size and extension of the supraspinatus tear, muscle atrophy, and associated rotator cuff lesions (biceps tendon pathologies and acromioclavicular joint osteoarthritis). Therefore, imaging exams, such as radiography, ultrasonography, or MRI, are essential to determine surgical indication[33].

Limitations

First, the reliability of the clinical tests, MRI and arthroscopy was not evaluated. Previous studies demonstrated a moderate to substantial agreement of the empty can, painful arc and external rotation resistance tests, but a fair agreement for the Hawkins’ and the Neer’s sign[35]. We suggest that future studies should evaluate mainly the reliability and analysis of Se and Sp of the physical examination.

Second, muscle weakness was evaluated manually using subjective criteria according to each tester. We did not use a dynamometer for objective data collection, as some studies considered a 20% decrease in strength in relation to the contralateral side, a positivity criterion for weakness[36]. Moreover, we did not quantify pain when performing each maneuver, with a visual analogue scale, for example, and any shoulder pain during the test was considered positive.

Third, the principal surgeon performing the arthroscopy was not blinded to the shoulder maneuvers and MRI; however, to reduce this bias, we included a second surgeon’s evaluation, blinded to physical examination and MRI.

CONCLUSION

Physical examination demonstrated good diagnostic value, showing that the drop arm test had a similar Sp to MRI for supraspinatus tears. However, MRI had higher Se compared with the shoulder maneuvers and was more accurate in ruling out supraspinatus tears.

ARTICLE HIGHLIGHTS

Research background

Shoulder maneuvers and magnetic resonance imaging (MRI) are performed in current practice in patients with rotator cuff tears (RCTs); however, there is insufficient evidence as to which clinical test is efficient for diagnosing supraspinatus tears.

Research motivation

The motivation for this study was the exponential increase in MRI requests and little appreciation of physical examination in patients with RCTs.

Research objectives

The objective of this study was to compare the accuracy of clinical tests with MRI for diagnosing supraspinatus tears.

Research methods

A prospective multicenter accuracy study of seven shoulder maneuvers and MRI for supraspinatus tears in patients undergoing arthroscopy was performed.

Research results

MRI and the drop arm test had the highest specificity (0.99 and 0.97, respectively) for overall supraspinatus tears; the Hawkin’s test had the highest rate of false-positive findings (0.36) in patients with intact tendons.

Research conclusions

Shoulder maneuvers had good diagnostic value for supraspinatus tears; however, MRI had the highest diagnostic value for ruling out tears.

Research perspectives

Futures studies are necessary to analyze the accuracy of clinical tests and MRI for infraspinatus and subscapularis tears.

ACKNOWLEDGEMENTS

The authors would like to thank the contribution of the Orthopedics and Traumatology Department of Escola Paulista de Medicina – Universidade Federal de São Paulo – UNIFESP, for supporting the realization of this study; without their support, this project would not have been completed.