Literature DB >> 33757470

Accuracy of a portable accelerometer-based navigation system for cup placement and intraoperative leg length measurement in total hip arthroplasty: a cross-sectional study.

Hiromasa Tanino1, Yasuhiro Nishida2, Ryo Mitsutake2, Hiroshi Ito2.   

Abstract

BACKGROUND: Complications after total hip arthroplasty (THA) are frequently the consequence of malpositioned components or leg length discrepancy after surgery. Recently, a new version of a portable, accelerometer-based hip navigation system (New HipAlign) was made available with a change in the method of measuring cup abduction and the addition of a leg length measurement function. The purposes of this study were to investigate cup positioning and to examine the accuracy of leg length measurement with New HipAlign.
METHODS: Cups were implanted and intraoperative leg length change was measured using New HipAlign in 60 THAs through a posterior approach in the lateral decubitus position. The cup position and radiographic leg length change were determined postoperatively on pelvic radiograph and computed tomography scans. We previously compared cup positioning with a previous version of a portable, accelerometer-based hip navigation system (Previous HipAlign) and conventional surgical techniques. Cup positioning in this study was compared with the results of out previous study using Previous HipAlign.
RESULTS: The mean cup abduction of 40.3° ± 4.9° (range, 26° to 53°) and the mean cup anteversion of 15.8° ± 5.6° (range, 6.7° to 29.5°) were found. The deviation of the postoperative measured angles from the target cup position was 3.7° ± 3.3° for cup abduction and 5.9° ± 3.6° for cup anteversion. 56/60 of the cups were inside the Lewinnek safe zone. Compared with our previous study using Previous HipAlign, there were no significant differences with regard to cup abduction, cup anteversion, the deviation from the target cup position for cup abduction, the value of deviation for cup anteversion, and the number of cups inside the Lewinnek safe zone (P = 0.218, 0.334, 0.651, 0.797, 0.592). The mean difference between the intraoperative and radiographic leg length changes was + 0.8 ± 3.4 mm. There was significant correlation between the intraoperative and radiographic leg length changes (r = 0.804, P = 0.000).
CONCLUSIONS: Use of New HipAlign allowed for accurate cup placement and reliable leg length measurement during THA. TRIAL REGISTRATION: Clinical trial is defined as 'any research study that prospectively assigns human participants or groups of humans to one or more health-related interventions to evaluate the effects on health outcome' by the World Health Organization (WHO). Because this study is not a clinical trial, trial registration is not needed.

Entities:  

Keywords:  Cup position; Leg length; Navigation; Portable; Total hip arthroplasty

Mesh:

Year:  2021        PMID: 33757470      PMCID: PMC7986257          DOI: 10.1186/s12891-021-04167-y

Source DB:  PubMed          Journal:  BMC Musculoskelet Disord        ISSN: 1471-2474            Impact factor:   2.362


  47 in total

1.  Accuracy of Component Positioning in 1980 Total Hip Arthroplasties: A Comparative Analysis by Surgical Technique and Mode of Guidance.

Authors:  Benjamin G Domb; John M Redmond; Steven S Louis; Kris J Alden; Robert J Daley; Justin M LaReau; Alexandra E Petrakos; Chengcheng Gui; Carlos Suarez-Ahedo
Journal:  J Arthroplasty       Date:  2015-07-02       Impact factor: 4.757

2.  Measuring leg length and offset with an imageless navigation system during total hip arthroplasty: is it really accurate?

Authors:  Tobias Renkawitz; Tibor Schuster; Thomas Herold; Holger Goessmann; Ernst Sendtner; Joachim Grifka; Thomas Kalteis
Journal:  Int J Med Robot       Date:  2009-06       Impact factor: 2.547

3.  Leg length and offset measures with a pinless femoral reference array during THA.

Authors:  Tobias Renkawitz; Tibor Schuster; Joachim Grifka; Thomas Kalteis; Ernst Sendtner
Journal:  Clin Orthop Relat Res       Date:  2009-09-19       Impact factor: 4.176

4.  Management of limb length inequality during total hip replacement.

Authors:  M Jasty; W Webster; W Harris
Journal:  Clin Orthop Relat Res       Date:  1996-12       Impact factor: 4.176

5.  Computer-Assisted Navigation Is Associated with Reductions in the Rates of Dislocation and Acetabular Component Revision Following Primary Total Hip Arthroplasty.

Authors:  Daniel D Bohl; Michael T Nolte; Kevin Ong; Edmund Lau; Tyler E Calkins; Craig J Della Valle
Journal:  J Bone Joint Surg Am       Date:  2019-02-06       Impact factor: 5.284

6.  The acetabular teardrop and its relevance to acetabular migration.

Authors:  S B Goodman; S J Adler; D P Fyhrie; D J Schurman
Journal:  Clin Orthop Relat Res       Date:  1988-11       Impact factor: 4.176

7.  A simple method of obtaining equal leg length in total hip arthroplasty.

Authors:  H M McGee; J H Scott
Journal:  Clin Orthop Relat Res       Date:  1985-04       Impact factor: 4.176

Review 8.  Acetabular component positioning in total hip arthroplasty: an evidence-based analysis.

Authors:  Joseph T Moskal; Susan G Capps
Journal:  J Arthroplasty       Date:  2011-02-05       Impact factor: 4.757

9.  Comparison of limb-length discrepancy after THA: with and without computer navigation.

Authors:  David J Licini; David J Burnikel; R Michael Meneghini; John L Ochsner
Journal:  Orthopedics       Date:  2013-05       Impact factor: 1.390

10.  Accurate leg length measurement in total hip arthroplasty: a comparison of computer navigation and a simple manual measurement device.

Authors:  Kyoichi Ogawa; Tamon Kabata; Toru Maeda; Yoshitomo Kajino; Hiroyuki Tsuchiya
Journal:  Clin Orthop Surg       Date:  2014-05-16
View more
  1 in total

1.  Accuracy of a novel accelerometer-based navigation (Naviswiss) for total hip arthroplasty in the supine position.

Authors:  Masahiro Hasegawa; Yohei Naito; Shine Tone; Akihiro Sudo
Journal:  BMC Musculoskelet Disord       Date:  2022-06-04       Impact factor: 2.562

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.