Literature DB >> 3267600

A comparison of denture base acrylic resins polymerised by microwave irradiation and by conventional water bath curing systems.

D al Doori, R Huggett, J F Bates, S C Brooks.   

Abstract

Entities:  

Mesh：

Substances：

Year:  1988        PMID： 3267600     DOI： 10.1016/s0109-5641(88)80084-8

Source DB:  PubMed          Journal:  Dent Mater        ISSN： 0109-5641            Impact factor:   5.304


× No keyword cloud information.
  6 in total

1.  Comparative evaluation of surface porosities in conventional heat polymerized acrylic resin cured by water bath and microwave energy with microwavable acrylic resin cured by microwave energy.

Authors:  Sunint Singh; Jayant N Palaskar; Sanjeev Mittal
Journal:  Contemp Clin Dent       Date:  2013-04

2.  To evaluate and compare the porosities in the acrylic mandibular denture bases processed by two different polymerization techniques, using two different brands of commercially available denture base resins - an in vitro study.

Authors:  Sitaram Prasad Kasina; Tarannum Ajaz; Sirisha Attili; Hemchand Surapaneni; Muralikrishna Cherukuri; H P Srinath
Journal:  J Int Oral Health       Date:  2014-02-26

3.  The effect of microwave processing and use of antimicrobial agent on porosity of conventional heat cured denture base resin: An in vitro study.

Authors:  U K Kartika; Benaiffer Agrawal; Naveen S Yadav; Praval Pratap Singh; Tripty Rahangdale
Journal:  J Indian Prosthodont Soc       Date:  2015 Jul-Sep

4.  Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures.

Authors:  Afnan F Al-Fouzan; Lamya A Al-Mejrad; Ahmed M Albarrag
Journal:  J Adv Prosthodont       Date:  2017-10-16       Impact factor: 1.904

5.  Bond strength of hard chairside reline resins to a rapid polymerizing denture base resin before and after thermal cycling.

Authors:  Karin Hermana Neppelenbroek; Ana Cláudia Pavarina; Mauricio Neves Gomes; Ana Lucia Machado; Carlos Eduardo Vergani
Journal:  J Appl Oral Sci       Date:  2006-12       Impact factor: 2.698

6.  Flexural strength of acrylic resins polymerized by different cycles.

Authors:  Débora Barros Barbosa; Raphael Freitas de Souza; Ana Carolina Pero; Juliê Marra; Marco Antonio Compagnoni
Journal:  J Appl Oral Sci       Date:  2007-10       Impact factor: 2.698
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.