Literature DB >> 32581456

How screw connections influence the primary stability of acetabular cups under consideration of different bone models.

Gafar Adam Ahmed1,2, Linda Auge1, Jessica Loke1, Carlos Alfonso Fonseca Ulloa1, Christian Fölsch1,2, Markus Rickert1,2, Bernd Alexander Ishaque1,2, Alexander Jahnke1.   

Abstract

INTRODUCTION: Good osteointegration of implants requires sufficient primary stability. Aim of this study was to examine the influence of screw fixation on the primary stability of press-fit cups.
METHODS: Two press-fit acetabular cups were tested with regard to the influence and number of screws and their primary stability.
RESULTS: For the relatively thin-walled Allofit®-S cup, an influence of the number of screws on the different forms of movement could be demonstrated.
CONCLUSIONS: We see a clear influence of the cup wall thickness on the elastic deformability and accordingly on the primary stability of the examined cups.
© 2020 Professor P K Surendran Memorial Education Foundation. Published by Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Cementless; Cup component; Hip endoprosthetics; Primary stability; Screw connection

Year:  2020        PMID: 32581456      PMCID: PMC7300235          DOI: 10.1016/j.jor.2020.05.020

Source DB:  PubMed          Journal:  J Orthop        ISSN: 0972-978X


  19 in total

1.  Evaluation of patients with pain following total hip replacement.

Authors:  Patrick J Duffy; Bassam A Masri; Donald S Garbuz; Clive P Duncan
Journal:  J Bone Joint Surg Am       Date:  2005-11       Impact factor: 5.284

2.  Effects of screw eccentricity on the initial stability of the acetabular cup.

Authors:  Jui-Ting Hsu; Chih-Han Chang; Kai-Nan An; Mark E Zobitz; Rapin Phimolsarnti; Ronald R Hugate; Kuo-An Lai
Journal:  Int Orthop       Date:  2006-09-01       Impact factor: 3.075

3.  High friction moments in large hard-on-hard hip replacement bearings in conditions of poor lubrication.

Authors:  Nicholas E Bishop; Arne Hothan; Michael M Morlock
Journal:  J Orthop Res       Date:  2012-12-13       Impact factor: 3.494

4.  Friction of total hip replacements with different bearings and loading conditions.

Authors:  Claire Brockett; Sophie Williams; Zhongmin Jin; Graham Isaac; John Fisher
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2007-05       Impact factor: 3.368

5.  Failure rate of cemented and uncemented total hip replacements: register study of combined Nordic database of four nations.

Authors:  Keijo T Mäkelä; Markus Matilainen; Pekka Pulkkinen; Anne M Fenstad; Leif Havelin; Lars Engesaeter; Ove Furnes; Alma B Pedersen; Søren Overgaard; Johan Kärrholm; Henrik Malchau; Göran Garellick; Jonas Ranstam; Antti Eskelinen
Journal:  BMJ       Date:  2014-01-13

Review 6.  Hip arthroplasty.

Authors:  Robert Pivec; Aaron J Johnson; Simon C Mears; Michael A Mont
Journal:  Lancet       Date:  2012-09-26       Impact factor: 79.321

7.  Analysis of the elastic bending characteristics of cementless short hip stems considering the valgus alignment of the prosthetic stem.

Authors:  Alexander Jahnke; Carlos A Fonseca Ulloa; Jörn Bengt Seeger; Markus Rickert; Gerhard Walter Jahnke; Gafar Adam Ahmed; Bernd Alexander Ishaque
Journal:  Clin Biomech (Bristol, Avon)       Date:  2018-02-03       Impact factor: 2.063

8.  Dislocations after total hip-replacement arthroplasties.

Authors:  G E Lewinnek; J L Lewis; R Tarr; C L Compere; J R Zimmerman
Journal:  J Bone Joint Surg Am       Date:  1978-03       Impact factor: 5.284

9.  Initial stability of cementless acetabular cups: press-fit and screw fixation interaction--an in vitro biomechanical study.

Authors:  Tomonori Tabata; Nobuhiro Kaku; Katsutoshi Hara; Hiroshi Tsumura
Journal:  Eur J Orthop Surg Traumatol       Date:  2014-11-25

10.  Primary cup stability in THA with augmentation of acetabular defect. A comparison of healthy and osteoporotic bone.

Authors:  F Amirouche; G Solitro; S Broviak; W Goldstein; M Gonzalez; R Barmada
Journal:  Orthop Traumatol Surg Res       Date:  2015-08-20       Impact factor: 2.256

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.