Literature DB >> 31865455

Carbon/PEEK nails: a case-control study of 22 cases.

Federico Sacchetti1, Lorenzo Andreani2, Michele Palazzuolo3, Stephane Cherix4, Enrico Bonicoli2, Elisabetta Neri2, Rodolfo Capanna2.   

Abstract

BACKGROUND: Interest around carbon/PEEK plates and nails has been raising. The elastic modulus close to the bone, the high load-carrying capacity and radiolucency make CFR/PEEK materials a potential breakthrough. In the literature, there are abundant data about CFR/PEEK plates in the treatment of proximal humerus, distal radius and distal fibula fractures. In patients affected by bone metastasis, CFR/PEEK nails were proved effective and safe with 12 months of follow-up. Very little is known about performances of CFR/PEEK nails in patients affected by other pathologies. PURPOSES: The aim of the study was to evaluate safety and efficacy of CFR/PEEK nails in the treatment of various pathological conditions. It was also investigated whatever radiolucency of this nails could lead to a more objective evaluation of bone callus or disease site. PATIENTS AND METHODS: In the study group were included 20 patients (22 bone segments) who underwent CFR/PEEK nail implantation (eight humerus, one tibia, nine femur and four knee arthrodesis). They were affected by pathological fractures, and in four cases, they required an arthrodesis of the knee. They were retrospectively evaluated considering nail failures and bone callus or disease progression (RUSH scores). Mean follow-up time was 11 months (min 6.8-max 20.3). In the control group were included patients treated with titanium nails in the same institution for the same pathologies. An interclass correlation coefficient (ICC) analysis was performed in both groups considering RUSH scores by two expert surgeon from two institution to assess whether radiolucency could lead to a more objective evaluation of disease or bone callus site.
RESULTS: The ICC of mean values between RUSH scores was 0.882 (IC 95%: 0.702-0.953) in the CFR/PEEK group, while it was 0.778 (IC 95%: 0.41-0.91) in the titanium group. Observers' evaluation showed a significantly higher obscuration by titanium nails than by CFR/PEEK nails. No osteosynthesis failures were reported in both groups.
CONCLUSIONS: Our results confirm the safety of CFR/PEEK nails in the short-medium term. The radiolucency of these materials led our observers to perform more objective evaluations of bone callus formation or disease progression compared to the titanium group given the higher ICC. LEVEL OF EVIDENCE: III Case-control therapeutic study.

Entities:  

Keywords:  Bone callus; CFR/PEEK; Carbon; Fracture healing; Metastasis; Nail

Year:  2019        PMID: 31865455     DOI: 10.1007/s00590-019-02602-4

Source DB:  PubMed          Journal:  Eur J Orthop Surg Traumatol        ISSN: 1633-8065


  40 in total

1.  Quantifying image distortion of orthopedic materials in magnetic resonance imaging.

Authors:  Matthew F Koff; Parina Shah; Kevin M Koch; Hollis G Potter
Journal:  J Magn Reson Imaging       Date:  2013-01-04       Impact factor: 4.813

2.  Inflammatory response against different carbon fiber-reinforced PEEK wear particles compared with UHMWPE in vivo.

Authors:  Sandra Utzschneider; Fabian Becker; Thomas M Grupp; Birte Sievers; Alexander Paulus; Oliver Gottschalk; Volkmar Jansson
Journal:  Acta Biomater       Date:  2010-06-08       Impact factor: 8.947

Review 3.  Metastatic bone disease from breast cancer: a review of minimally invasive techniques for diagnosis and treatment.

Authors:  Dimitrios Filippiadis; Andreas F Mavrogenis; Argyro Mazioti; Konstantinos Palialexis; Panayiotis D Megaloikonomos; Panayiotis J Papagelopoulos; Alexis Kelekis
Journal:  Eur J Orthop Surg Traumatol       Date:  2017-06-08

4.  Biological response to chopped-carbon-fiber-reinforced peek.

Authors:  K A Jockisch; S A Brown; T W Bauer; K Merritt
Journal:  J Biomed Mater Res       Date:  1992-02

5.  Outcomes of proximal humeral fracture fixation with locked CFR-PEEK plating.

Authors:  Jan Christoph Katthagen; Alexander Ellwein; Olga Lutz; Christine Voigt; Helmut Lill
Journal:  Eur J Orthop Surg Traumatol       Date:  2016-12-03

6.  Characterization of short-fibre reinforced thermoplastics for fracture fixation devices.

Authors:  S A Brown; R S Hastings; J J Mason; A Moet
Journal:  Biomaterials       Date:  1990-10       Impact factor: 12.479

7.  Investigation of metallic and carbon fibre PEEK fracture fixation devices for three-part proximal humeral fractures.

Authors:  Emer M Feerick; Jim Kennedy; Hannan Mullett; David FitzPatrick; Patrick McGarry
Journal:  Med Eng Phys       Date:  2012-09-16       Impact factor: 2.242

8.  An estimation of fatigue life for a carbon fibre/poly ether ether ketone hip joint prosthesis.

Authors:  M Akay; N Aslan
Journal:  Proc Inst Mech Eng H       Date:  1995       Impact factor: 1.617

Review 9.  Current Options for Determining Fracture Union.

Authors:  Saam Morshed
Journal:  Adv Med       Date:  2014-09-14

10.  A new volar plate made of carbon-fiber-reinforced polyetheretherketon for distal radius fracture: analysis of 40 cases.

Authors:  Luigi Tarallo; Raffaele Mugnai; Roberto Adani; Francesco Zambianchi; Fabio Catani
Journal:  J Orthop Traumatol       Date:  2014-07-15
View more
  1 in total

1.  Effect of Intramedullary Nailing Patterns on Interfragmentary Strain in a Mouse Femur Fracture: A Parametric Finite Element Analysis.

Authors:  Gregory B Lowen; Katherine A Garrett; Stephanie N Moore-Lotridge; Sasidhar Uppuganti; Scott A Guelcher; Jonathan G Schoenecker; Jeffry S Nyman
Journal:  J Biomech Eng       Date:  2022-05-01       Impact factor: 2.097

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.