| Literature DB >> 31658247 |
Gabriel Balaban1,2, Brian P Halliday3, Wenjia Bai4, Bradley Porter2, Carlotta Malvuccio5, Pablo Lamata2, Christopher A Rinaldi6, Gernot Plank7, Daniel Rueckert4, Sanjay K Prasad3,8, Martin J Bishop2.
Abstract
This paper presents a morphological analysis of fibrotic scarring in non-ischemic dilated cardiomyopathy, and its relationship to electrical instabilities which underlie reentrant arrhythmias. Two dimensional electrophysiological simulation models were constructed from a set of 699 late gadolinium enhanced cardiac magnetic resonance images originating from 157 patients. Areas of late gadolinium enhancement (LGE) in each image were assigned one of 10 possible microstructures, which modelled the details of fibrotic scarring an order of magnitude below the MRI scan resolution. A simulated programmed electrical stimulation protocol tested each model for the possibility of generating either a transmural block or a transmural reentry. The outcomes of the simulations were compared against morphological LGE features extracted from the images. Models which blocked or reentered, grouped by microstructure, were significantly different from one another in myocardial-LGE interface length, number of components and entropy, but not in relative area and transmurality. With an unknown microstructure, transmurality alone was the best predictor of block, whereas a combination of interface length, transmurality and number of components was the best predictor of reentry in linear discriminant analysis.Entities:
Mesh:
Year: 2019 PMID: 31658247 PMCID: PMC6837623 DOI: 10.1371/journal.pcbi.1007421
Source DB: PubMed Journal: PLoS Comput Biol ISSN: 1553-734X Impact factor: 4.475
Number of patients, images and simulations, along with LGE feature distribution given as median and IQR.
| patients | 157 | |
| images | 699 | |
| simulations | 6990 | |
| relative area | 0.14 | (0.07–0.25) |
| transmurality | 0.39 | (0.29–0.5) |
| interface length (mm) | 137.5 | (73.05–207.63) |
| number of components | 7 | (4–10) |
| entropy | 2.97 | (2.68–3.23) |
Fig 1LGE feature Spearman correlation values.
Fig 2Example instances of transmural reentry and transmural block for simulation models with replacement and interstitial fibrosis based on short axis (SAX) LGE-CMR images.
White areas are electrically inert, whereas black lines represent separating edges which current cannot cross.
Fig 3Number of simulated electrical instabilities (transmural block or transmural reentry) observed in 699 LGE-CMR derived simulation models for each combination of fibrosis type and density.
Fig 4Distribution of scar feature values for various microstructure types.
Microstructure types are classified as interstitial or replacement, and high (max density 0.8-1.0) or low (max density 0.4-0.6) density. Each data point represents an image whose models experienced at least one event (reentry or block) for a particular microstructure type.
Fig 5Boxplots showing the distribution of image feature values for images that had at least one simulated block vs no block (right column) or at least one simulated reentry vs no reentry (left column).
AUC scores are area under curve in a receiver operating curve analysis for each feature’s ability to predict either reentry or block for a given image.
The top 3 best combinations of 2-3 LGE features obtained from Fisher’s linear discriminant analysis (LDA) for predicting block or reentry in one more simulations for a given image.
All features were max-min normalized to the range 0-1. Coefficients are the weight values assigned by the LDA to each normalized feature. AUC values are area under the curve from a 20-fold cross validated receiver operating curve analysis whose threshold values (obtained from 1 fold) are the feature linear combinations (obtained from the remaining 19 folds).
| event | features | LDA coefficients | AUC |
|---|---|---|---|
| block | transmurality, entropy | 6.0, 0.44 | 0.78 |
| transmurality, components | 6.05, -0.55 | 0.78 | |
| transmurality, interface length | 6.27, -0.62 | 0.78 | |
| reentry | interface length, components, transmurality | 7.17, -6.45, 1.28 | 0.80 |
| interface length, components | 7.9, -7.09 | 0.79 | |
| interface length, components relative area | 8.58, -7.32, -0.74 | 0.79 |
Fig 6Example LGE-CMR images demonstrating high and low feature values.
Areas in blue are LGE, whereas the yellow border in the interface length column shows the location of the myocardial-LGE interface. The green symbols show the stimulus sites. For the entropy images the segmentation masks are not shown to allow for visual comparison of the LGE texture.