Literature DB >> 29866666

Cause of irreducible dislocation of a re-revision THR.

Evelyn Patricia Murphy1, Christopher Fenelon2, Shane Russell1, Finbarr Condon1.   

Abstract

Instability or recurrent dislocations are a common reason for revision of total hip replacements (THRs). Dual-mobility constructs can help improve stability by increasing the femoral head jump distance. These constructs are used to decrease the risk of re-revision in the setting of recurrent dislocation. This case describes an unusual case of irreducible dislocation of a re-revision THR due to intraprosthetic dislocation. The patient required open reduction and revision of this construct to a tripolar implant. This is important to appreciate from an emergency medicine point of view as repeated attempts at reduction will be fruitless and may result in a femur fracture. This particular type of dislocation is very rare. Perioperative considerations should include early referral to the orthopaedic team for reduction in theatre, and having a low threshold for open reduction. Revision options should be available when bringing a case like this to the operating theatre. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Entities:  

Keywords:  hip prosthesis implantation; prosthesis failure

Mesh:

Year:  2018        PMID: 29866666      PMCID: PMC5990063          DOI: 10.1136/bcr-2017-223072

Source DB:  PubMed          Journal:  BMJ Case Rep        ISSN: 1757-790X


  30 in total

Review 1.  The dislocating hip: what to do, what to do.

Authors:  Robert B Bourne; Ramin Mehin
Journal:  J Arthroplasty       Date:  2004-06       Impact factor: 4.757

2.  Reduction of dislocated hip prosthesis in the emergency department using conscious sedation: a prospective study.

Authors:  S J Frymann; G L A Cumberbatch; A S L Stearman
Journal:  Emerg Med J       Date:  2005-11       Impact factor: 2.740

3.  Ideal femoral head size in total hip arthroplasty balances stability and volumetric wear.

Authors:  Michael B Cross; Denis Nam; David J Mayman
Journal:  HSS J       Date:  2012-09-13

4.  Use of a dual mobility socket to manage total hip arthroplasty instability.

Authors:  Olivier Guyen; Vincent Pibarot; Gualter Vaz; Christophe Chevillotte; Jacques Béjui-Hugues
Journal:  Clin Orthop Relat Res       Date:  2008-09-09       Impact factor: 4.176

5.  Primary total hip arthroplasty with dual mobility socket to prevent dislocation: a 22-year follow-up of 240 hips.

Authors:  Bertrand Boyer; Rémi Philippot; Jean Geringer; Frédéric Farizon
Journal:  Int Orthop       Date:  2011-06-23       Impact factor: 3.075

6.  Dual mobility cups in revision total hip arthroplasty.

Authors:  Anthony Viste; Romain Desmarchelier; Michel-Henri Fessy
Journal:  Int Orthop       Date:  2016-12-08       Impact factor: 3.075

7.  Primary total hip replacement in patients over 80 years of age.

Authors:  D P Newington; G C Bannister; M Fordyce
Journal:  J Bone Joint Surg Br       Date:  1990-05

8.  Prosthetic hip range of motion and impingement. The effects of head and neck geometry.

Authors:  D R Chandler; R Glousman; D Hull; P J McGuire; I S Kim; I C Clarke; A Sarmiento
Journal:  Clin Orthop Relat Res       Date:  1982-06       Impact factor: 4.176

9.  Dislocations after total hip-replacement arthroplasties.

Authors:  G E Lewinnek; J L Lewis; R Tarr; C L Compere; J R Zimmerman
Journal:  J Bone Joint Surg Am       Date:  1978-03       Impact factor: 5.284

Review 10.  The dislocating hip arthroplasty: prevention and treatment.

Authors:  Preetesh D Patel; Aaron Potts; Mark I Froimson
Journal:  J Arthroplasty       Date:  2007-06       Impact factor: 4.757

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.