Literature DB >> 26984921

Analysis of FDA-Approved Orthopaedic Devices and Their Recalls.

Charles S Day1, David J Park2, Frederick S Rozenshteyn2, Nana Owusu-Sarpong2, Aldebarani Gonzalez3.   

Abstract

BACKGROUND: The U.S. Food and Drug Administration (FDA) evaluates medical devices by two main pathways. The more stringent Premarket Approval (PMA) review requires clinical trials, and the Premarket Notification 510(k) process generally exempts devices from clinical trials if they prove to be substantially equivalent to existing devices. We hypothesized that orthopaedic devices are more likely to be cleared through the 510(k) process and thus are more susceptible to being recalled.
METHODS: Using the FDA's public database, we searched for the following: PMA and 510(k) clearances for orthopaedics and non-orthopaedic specialties, including General & Plastic Surgery, Gastroenterology/Urology, Obstetrics/Gynecology, and Ear Nose & Throat, from 1992 to 2012. Additionally, we searched for all device recall events from 2002 to 2012. For the top-twenty recall companies, we calculated the odds ratio that compares the likelihood of recall for 510(k)-approved devices with that for PMA-approved devices.
RESULTS: From 1992 to 2012, the proportion of non-orthopaedic devices cleared via the 510(k) process decreased from 91% to 53%. However, that of orthopaedic devices decreased only from 94% to 88%. Furthermore, we found that from 2002 to 2012, the percentage of recalled devices was 17.8% for 510(k)-cleared devices and 1.6% for PMA-approved devices. When stratified on the basis of recall class, the odds ratios were 3.5 for class-I devices, 13.2 for class-II devices, and 8.5 for class-III devices.
CONCLUSIONS: Given that 510(k)-cleared devices were 11.5 times more likely to be recalled than PMA-approved devices, it is concerning that most orthopaedic devices are cleared through the 510(k) process with limited clinical trials data. CLINICAL RELEVANCE: When orthopaedic surgeons are considering using a new device clinically in their patients, it is important for them to consider how the new device was approved by the FDA. If the device was approved by the 510(k) pathway, then it may have been approved without additional clinical studies confirming efficacy or safety.
Copyright © 2016 by The Journal of Bone and Joint Surgery, Incorporated.

Entities:  

Mesh:

Year:  2016        PMID: 26984921     DOI: 10.2106/JBJS.15.00286

Source DB:  PubMed          Journal:  J Bone Joint Surg Am        ISSN: 0021-9355            Impact factor:   5.284


  13 in total

Review 1.  Evaluation of technologies approved for supplemental payments in the United States.

Authors:  Timothy J Judson; Sanket S Dhruva; Rita F Redberg
Journal:  BMJ       Date:  2019-06-17

Review 2.  Technology assessment and cost-effectiveness in orthopedics: how to measure outcomes and deliver value in a constantly changing healthcare environment.

Authors:  Jeremy M Burnham; Fabien Meta; Vincent Lizzio; Eric C Makhni; Kevin J Bozic
Journal:  Curr Rev Musculoskelet Med       Date:  2017-06

3.  Transparency and Dermatologic Device Approval by the US Food and Drug Administration.

Authors:  Harib H Ezaldein; Jeffrey F Scott; Emily S Yin; Alessandra Ventura; Nicholaas P DeRuyter; David J Leffell
Journal:  JAMA Dermatol       Date:  2018-03-01       Impact factor: 10.282

4.  Medical Device Recalls in Radiation Oncology: Analysis of US Food and Drug Administration Data, 2002-2015.

Authors:  Michael J Connor; Kathryn Tringale; Vitali Moiseenko; Deborah C Marshall; Kevin Moore; Laura Cervino; Todd Atwood; Derek Brown; Arno J Mundt; Todd Pawlicki; Abram Recht; Jona A Hattangadi-Gluth
Journal:  Int J Radiat Oncol Biol Phys       Date:  2017-02-12       Impact factor: 7.038

5.  The Complex Process of Using the Interconnected Knee Arthroplasty Device Clearance Pathway.

Authors:  Andrew Zhu; Xiaohan Ying; Christian A Pean; Neil P Sheth; Michael B Cross; Alejandro Gonzalez Della Valle; Ajay Premkumar
Journal:  HSS J       Date:  2022-06-20

6.  Improving patient safety during introduction of novel medical devices through cumulative summation analysis.

Authors:  Vejay N Vakharia; Roman Rodionov; Andrew W McEvoy; Anna Miserocchi; Rachel Sparks; Aidan G O'Keeffe; Sebastien Ourselin; John S Duncan
Journal:  J Neurosurg       Date:  2018-02-16       Impact factor: 5.115

7.  Risk of Recall Among Medical Devices Undergoing US Food and Drug Administration 510(k) Clearance and Premarket Approval, 2008-2017.

Authors:  Jonathan R Dubin; Stephen D Simon; Kirsten Norrell; Jacob Perera; Jacob Gowen; Akin Cil
Journal:  JAMA Netw Open       Date:  2021-05-03

8.  Comparison of rates of safety issues and reporting of trial outcomes for medical devices approved in the European Union and United States: cohort study.

Authors:  Thomas J Hwang; Elisaveta Sokolov; Jessica M Franklin; Aaron S Kesselheim
Journal:  BMJ       Date:  2016-06-28

Review 9.  Lack of evidence-the anti-stepwise introduction of metal-on-metal hip replacements.

Authors:  Aleksi Reito; Lari Lehtovirta; Olli Lainiala; Keijo Mäkelä; Antti Eskelinen
Journal:  Acta Orthop       Date:  2017-07-18       Impact factor: 3.717

10.  Recall Rates of Total Knee Arthroplasty Devices Are Dependent on the FDA Approval Process.

Authors:  Carl Pellerin; Micah Adamson; Cory Janney
Journal:  Cureus       Date:  2020-08-14
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.