Evaluation of High-Dose Daptomycin Versus Vancomycin Alone or Combined with Clarithromycin or Rifampin Against Staphylococcus aureus and S. epidermidis in a Novel In Vitro PK/PD Model of Bacterial Biofilm.

INTRODUCTION: Medical device infections are associated with significant morbidity and mortality. These difficult-to-treat infections often result in antibiotic failure and resistance. Combination therapy is often required, however, the most optimal combination is unknown. We evaluated the in vitro activity of daptomycin (DAP) or vancomycin (VAN) alone and in combination with rifampin (RIF) or clarithromycin (CLA) against strains of Staphylococcus aureus and S. epidermidis grown in biofilm on 3 prosthetic device materials.
METHODS: One methicillin-resistant S. aureus (MRSA R5266), one heteroresistant vancomycin-intermediate S. aureus (hVISA R3640), and one methicillin-resistant S. epidermidis (MRSE R461) strain was evaluated in a CDC biofilm reactor with titanium, Teflon®, and steel coupons. Regimens simulated included DAP 10 mg/kg/day, and VAN 1 g q12h alone or in combination with RIF 600 mg q24h or CLA 250 mg q12h. Additional regimens including DAP 12 mg/kg/day or VAN ± RIF 450 mg q12h were evaluated against the hVISA strain.
RESULTS: DAP + RIF or VAN + RIF demonstrated enhanced activity against R3640 in embedded biofilm (EB) cells in all materials versus DAP or VAN alone (P ≤ 0.040). Only DAP + RIF demonstrated sustained bactericidal activity (≥3.80 log10 CFU/cm2 reduction from baseline) against EB and planktonic cells of R5266 and EB cells of R461 in all 3 materials. Of interest, CLA did not appear to enhance DAP or VAN killing activities, and the addition of RIF prevented the emergence of resistance to DAP or VAN in all organisms.
CONCLUSION: Using an in vitro bacterial biofilm model containing three common prosthetic device materials, DAP + RIF and VAN + RIF were the most effective regimens. DAP + RIF displayed the greatest activity and represents a promising combination to evaluate for treatment of biofilm-associated staphylococcal infections.

Introduction

Despite advances in bioengineering and the widespread use of antibiotic prophylaxis, medical implant infections represent a significant source of morbidity in the United States [1]. Two of the most common causative agents of perioperative infections are Staphylococcus aureus and coagulase-negative staphylococci (CoNS), in particular S. epidermidis [1]. Both species are frequent commensal organisms of the human skin, and insertion of medical implants through the skin may result in the colonization of these devices. Attached to the surface of the implant, bacteria aggregate in a hydrated polymeric matrix forming sessile communities of biofilm, well protected against hostile conditions of the environment, including antimicrobial exposure [2, 3].

Staphylococci spp., especially multidrug-resistant Staphylococci spp. organized in biofilm, represent a significant challenge for clinicians making it difficult or impossible to treat with antimicrobial agents, and detachment from the device may result in systemic infections [4]. Daptomycin (DAP) is a potent lipopeptide that has demonstrated rapid and concentration-dependent bactericidal activity against Staphylococci spp. [5]. Although DAP is known to rapidly penetrate the matrix of biofilm, little is known about the pharmacodynamic activity of DAP in biofilm-associated infections to explain the observed reduced bactericidal activity [6]. Various in vitro models have investigated the activity of DAP against staphylococci biofilms, but most of them have specific limitations. The majority of these models evaluate drug activity under static conditions using a unique type of material, or they do not allow for the investigation of the structure of the biofilm secondary to drug exposure [7-10]. We previously modified an existing commercially available biofilm model for pharmacokinetic/pharmacodynamic (PK/PD) evaluation of the in vitro activity of antimicrobials against mature biofilm of Staphylococci spp. under conditions mimicking human pharmacokinetics [11]. Using this model, we have demonstrated moderate activity of high-dose DAP alone against biofilm embedded methicillin-sensitive S. aureus (MSSA) and methicillin-resistant S. aureus (MRSA) isolates on polycarbonate coupons. Combining DAP with RIF or CLA appeared promising as a significant increase in killing activity was noted against DAP-susceptible MRSA or MSSA, respectively [11]. Macrolides like azithromycin and CLA have been shown to decrease the production of polysaccharide glycocalyx by bacteria and have demonstrated synergy with other antibiotics against biofilm-embedded organisms [11, 12]. Even in strains with diminished susceptibility, CLA has been shown to eradicate the polysaccharide glycocalyx matrix surrounding MRSA and S. epidermidis bacterial colonies, subsequently decreasing biofilm formation and increasing drug penetration [11, 13, 14].

The objective of the present study was to quantify the ability of S. aureus and S. epidermidis with varying antibiotic susceptibility profiles (MRSA, heteroresistant vancomycin-intermediate S. aureus [hVISA], methicillin-resistant S. epidermidis [MRSE]) to form biofilms and to evaluate the activity of DAP alone or in combination with RIF and CLA against cells embedded in biofilm on titanium (TT), Teflon® (TE) and steel (ST) coupons.

Materials and Methods

Bacterial Strains

Two MRSA (R5266 and R3640), including 1 hVISA (R3640) confirmed by population analysis, and 1 MRSE (R461) were selected from the Anti-Infective Research Laboratory collection to be evaluated.

Antimicrobials

Daptomycin analytical powder was provided by the manufacturer (Cubist Pharmaceuticals, Inc., Lexington, MA, USA). Stock solutions were prepared according to manufacturer’s recommendations. Vancomycin (VAN), CLA and RIF were purchased form Sigma-Aldrich (St. Louis, MO, USA). CLA and RIF were reconstituted following Clinical Laboratory Standards Institute (CLSI) guidelines using methanol and prepared freshly prior to each experiment [15].

Media

Tryptic Soy broth supplemented with 1% glucose (gSTSB) and 1/10th gSTSB were used for the 24- and 16-h conditioning phase, respectively, to facilitate biofilm formation. Mueller–Hinton broth (MHB II; Difco, Detroit, MI, USA) supplemented with 25 or 50 mg/L (SMHB II) of calcium for in vitro experiments using VAN or DAP, respectively, and 12.5 mg/L magnesium. Colony counts were determined using Tryptic Soy Agar (TSA; Difco, Detroit, MI, USA) plates.

Susceptibility Testing

Susceptibility testing of all antimicrobials to determine minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) was performed in duplicate by broth microdilution at ~5 × 105 colony-forming unit (CFU)/mL in MHB II or SMHB II according to Clinical and CLSI guidelines [15]. Biofilm MICs (MBIC) of all antimicrobials were performed using the pin-lid method as previously described [16]. Drug-containing plates at threefold the organism MIC were used to screen for changes in susceptibility.

In Vitro PK/PD Model

Isolates were grown on TSA plates incubated at 37 °C for 24 h and then suspended in normal saline to reach a concentration equivalent to a 0.5 McFarland. The in vitro model consisted of a previously described CDC biofilm reactor (CBR) model (BioSurfaces Technologies, Bozeman, MT, USA), which we modified to run PK/PD, simulating human PK to evaluate the in vitro activity of antimicrobials [11, 17, 18]. Briefly, a 40-h biofilm conditioning phase was performed prior to drug therapy initiation and consisted of a 24 h incubation at 37 °C in 1% gSTSB inoculated with the specified organism, followed by 16 h of a continuous flow with 1/10th gSTSB performed with peristaltic pumps (Masterflex®; Cole-Parmer Instrument Company, Chicago, IL, USA). Upon completion of conditioning and continuous flow phases (T 0), MHB II (SMHB II for DAP-containing regimens) was used as media for the drug therapy phase, and boluses of antibiotics were injected into the reactor. Each CBR model held 8 rods with 3 coupons each, allowing for 3 different biomaterials (TT, TE and ST) in each rod. The coupons had a surface area of 3.17 cm2. The CBR was placed in a 37 °C incubator room throughout the procedure. Fresh media were continuously supplied and removed from the compartment along with the drug via a peristaltic pump set to simulate the antibiotic half-lives. Free drug concentrations were used, and simulated regimens for each strain included: DAP10 mg/kg/day [target free drug peak concentration (fC max) 11.3 mg/L; free area under the concentration–time curve from 0 to 24 h (fAUC0–24) 83.1 mg h/L; average half-life, 8 h; protein binding, 92%] [19], alone or in combination with CLA 250 mg q12h (fC max 1 mg/L; average half-life 3.5 h; protein binding 50%) [20], or RIF 600 mg q24h (fC max 3.5 mg/L; average half-life 3 h; protein binding 80%) [21-23], and VAN 2 g q12h (fC max 30 mg/L; average half-life 6 h; protein binding 50%) [24, 25] alone or in combination with CLA 250 mg q12h or RIF 600 mg q24h. For the hVISA strain, 3 additional regimens were also incorporated: DAP 12 (DAP12) mg/kg/day (fC max 14.7 mg/L; fAUC0–24 102.2 mg h/L), alone and in combination with RIF 450 mg q12h (fCmax 2.9 mg/L) [26, 27], and VAN 2 g q12h in combination with RIF 450 mg q12h. A growth control was run in the absence of drug (simulated half-life 8 h), and each regimen was run in duplicate to ensure reproducibility.

Pharmacodynamic Analysis

One rod was aseptically removed from each model at 0, 4, 8, 24, 48 and 72 h. Each coupon was rinsed with sterile normal saline to remove excess planktonic cells (P). Biofilm-embedded bacteria (BEB) were recovered from the coupons by 3 alternating 60-s cycles of vortexing and sonication at 20 Hz (Bransonic® 12; Branson Ultrasonic Corporation, Danbury, CT, USA) and a final 60 s of vortexing as previously described [11]. Recovered biofilm cells were serially diluted in normal saline and spiral plated with an automatic spiral plater (WASP; DW Scientific, West Yorkshire, UK) onto TSA to allow enumeration of viable colonies. Biofilm-embedded cell concentrations (mean and standard deviation in CFU/cm2) were then computed for each coupon. Colonies were read using protocol reader (ProtoCOL; Microbiology International, Frederick, MD, USA). These methods were reliable to a lower limit of detection of 1−log10 CFU/cm2. The total reduction in log10 CFU/cm2 over 72 h was determined by plotting time-kill curves based on the number of viable organisms over the time period. Bactericidal activity (99.9% kill) was defined as a ≥3−log10 CFU/cm2 reduction in colony count from initial inoculum. Bacteriostatic activity was defined as a <3−log10 CFU/cm2 reduction in colony count from the initial inoculum, and inactivity was defined as no observed reduction in initial inocula. The time to achieve a 99.9% bacterial load reduction was determined by linear regression (if r  ≥ 0.95) or visual inspection. Therapeutic enhancement of combination regimens was defined as ≥2−log10 CFU/cm2 reduction over the most active single agent.

Pharmacokinetic Analysis

Pharmacokinetic samples were obtained, through the injection port of each model at the same time points as PD analysis for verification of target antibiotic concentrations. All samples were stored at −70 °C until ready for analysis. VAN concentrations were measured by fluorescence polarization immunoassay (TDx®; Abbott Diagnostics). Interday coefficients of variance (CV%) were less than 9% for low, medium and high standards (7, 35 and 75 mg/L), respectively. Concentrations of RIF were determined by bioassay utilizing Kocuria rhizophila (formerly Micrococcus luteus) ATCC 9341 as previously described [28]. Briefly, ¼-inch holes were punched in agar plates (antibiotic medium 11) pre-swabbed with a 0.5 McFarland suspension of the test organism and filled with 50 µL of standards or samples. This assay demonstrated a CV% of less than 5% for 2.5, 5, and 10 mg/L standards. CLA concentrations were measured by bioassay using Bacillus subtilis ATCC 6631 and antibiotic medium 11 following the same procedure. Each standard was tested in duplicate. Intraday CV% were less than 7% for 1, 2, and 5 mg/L. Plates were incubated for 18–24 h at 37 °C at which time the zone sizes were measured using a protocol reader (Protocol; Microbiology International, Frederick, MD, USA). Concentrations of DAP were validated utilizing high-performance liquid chromatography (HPLC) [29-31]. Briefly, 100 µL of samples were processed with 200 µL of 0.1% formic acid in methanol. After centrifugation, supernatant was removed and transferred to an auto-sampler vial for injection. An isocratic buffer consisting of 35% acetonitrile and 65% of ammonium phosphate buffer (0.5%) was run at a flow rate of 1.0 mL/min. A Nova-Pak C18 column (3.9 × 150 mm; Waters Corp., Milford, MA, USA) was used for separation. Standards were prepared over the range of 3.75–50 mg/L, and interday CV% were less than 11% for low, medium and high standards, with a standard curve r 2 of 0.99.

The half-life (t 1/2), areas under the curve (AUC), and fC max were determined by the trapezoidal method utilizing PK Analyst software (Version 1.10, MicroMath Scientific Software, Salt Lake City, UT, USA).

Resistance

Susceptibility testing of colonies recovered at 48 and 72 h was performed according to CLSI M100-S21 guidelines to evaluate changes in MIC values from baseline isolates. Similarly, biofilm MICs were performed to evaluate any changes in MBICs.

Biofilm Quantification

Capacity of organisms to form biofilm was assessed by the crystal violet method as previously described [32, 33]. Bacterial strains were grown in 96-well polystyrene flat bottom trays for 24 h using gSTSB, 2% NaCl and 50 mg/L calcium. After incubation, the broth containing free planktonic cells was drained, washed with normal saline and each well was stained with 2% crystal violet, rinsed with deionized water and dried. Following drying, 33% (vol/vol) glacial acetic acid was added to re-solubilize the dye and break down the biofilm for reading. Adherent presence of biofilm was measured at optical density (OD)570 using a spectrophotometer. Control strains for low, medium and high biofilm production in this assay were ATCC 12228, 35556 and NRS 101, respectively.

Scanning Electron Microscopy (SEM)

Coupons from rods recovered at 0 and 72 h were evaluated for presence and structure of biofilm by SEM. After removal, coupons were rinsed in normal saline to remove non-adherent cells and immersed in a fixative solution containing 2.5% glutaraldehyde and 2% paraformaldehyde in 0.1 M sodium phosphate buffer. Coupons were then dehydrated in a graded ethanol series and carbon coated at 30 A for 3 min utilizing a SeeVac Conductavac IV sputter coater (Seevac Inc., Pittsburgh, PA, USA). The coupons were imaged using a Hitachi S570 SEM at 2,000× magnification and evaluated for the presence and characteristics of biofilm.

Statistical Analysis

Changes in CFU/mL for planktonic and CFU/cm2 for biofilm-embedded bacteria at 72 h were compared by one-way analysis of variance (ANOVA) with Tukey’s Post Hoc test. A P value of ≤0.05 was considered significant. All statistical analyses were performed using SPSS Statistical Software (Release 20.0, SPSS Inc., Chicago, IL, USA).

Compliance with Ethics

This article does not involve any new studies with human or animal subjects performed by any of the authors.

Results

Organism susceptibilities are displayed in Table 1. All three isolates were susceptible to DAP (MICs and MBCs of 0.25–0.5 mg/L), VAN (MIC 1 mg/L, MBC ranging from 1 to 4 mg/L) and RIF (MIC < 0.0625 mg/L, MBC = 0.5 mg/L). In contrast, all strains were resistant to CLA (MIC > 32 mg/L). MBICs for all isolates against were two- to four-fold higher than reported MICs. Changes in organism susceptibilities post model experiments are reported in Table 2.

Table 1

Susceptibility results of each antimicrobial evaluated against the two S. aureus and one S. epidermidis isolates

Antimicrobial agent	MRSA 5266			hVISA 3640			MRSE 461
	MIC (mg/L)	MBC (mg/L)	MBIC (mg/L)	MIC (mg/L)	MBC (mg/L)	MBIC (mg/L)	MIC (mg/L)	MBC (mg/L)	MBIC (mg/L)
DAP	0.25	0.25	4	0.5	0.5	4	0.25	0.25	1
VAN	1	1	8	1	4	4	1	1	4
RIF	<0.0625	0.5	<0.0625	<0.0625	0.5	<0.0625	<0.0625	0.5	<0.0625
CLA	>32	N/A	>64	>32	N/A	>64	>32	N/A	>64

CLA clarithromycin, DAP daptomycin, hVISA heteroresistant vancomycin-intermediate S. aureus, MBC minimum bactericidal concentrations, MBIC biofilm MICs, MIC minimum inhibitory concentrations, MRSA methicillin-resistant Staphylococcus aureus, MRSE methicillin-resistant Staphylococcus epidermidis, RIF rifampin, VAN vancomycin

Table 2

In vitro activity of antimicrobials in the pharmacokinetic/pharmacodynamic biofilm reactor model

Strain	Regimen	TT	TE	ST	T 48 Mutant MIC (mg/L)a	T 72 Mutant MIC (mg/L)a
Reduction in log10 CFU/cm2 from T 0 (baseline) to T 72
MRSA 5266	DAP10	1.17 ± 0.56	1.15 ± 0.57d	0.72 ± 0.63	NRb	2
	DAP10/CLA	0.72 ± 0.05d	0.59 ± 0.3d	0.74 ± 0.03d	2/NAc	4/NA
	DAP10/RIF	4.13 ± 0.34♯,^,§	4.58 ± 0♯,^,§	4.38 ± 0.81♯,^,§	NR/NR	NR/NR
	VAN	0.46 ± 0.84	1.55 ± 0.74	0.65 ± 0.57	NR	NR
	VAN/CLA	0.42 ± 0.21	0.2 ± 0.37	0.34 ± 0.35	NR/NA	NR/NA
	VAN/RIF	1.89 ± 0.02♯	2.46 ± 0.16♯	1.95 ± 0.11d,♯	NR/>32	NR/>32
hVISA 3640	DAP 10	0.17 ± 0.28d	0.15 ± 0.21d,♯	−0.47 ± 0.05d	NR	8
	DAP 12	0.27 ± 0.69	−0.02 ± 0.18♯	0.2 ± 0.76♯	NR	NR
	DAP10/CLA	−0.34 ± 0.19d	−0.37 ± 0.12d,♯	−0.6 ± 0.09d	4/NA	4/NA
	DAP10/RIF	2.96 ± 0.52♯,^,§	2.95 ± 0.04♯^§	2.82 ± 0.59♯,^,§	NR/NR	NR/NR
	DAP12/RIF450	2.72 ± 0.84♯,^,§	2.43 ± 0.18♯,^,§	2.76 ± 0.73♯,^,§	NR/NR	NR/NR
	VAN	0.57 ± 1.18	0.82 ± 0.06♯	0.49 ± 0.43♯	NR/NR	NR/NR
	VAN/CLA	0.61 ± 0.03	−0.43 ± 0.06d,♯	−0.41 ± 0.03	NR/NA	4/NA
	VAN/RIF	1.46 ± 0.12♯	2.70 ± 0.54♯,§	2.41 ± 0.16♯,§	NR/NR	NR/NR
	VAN/R450	2.67 ± 0.47♯,^	3.06 ± 0.42♯,^,§	2.49 ± 0.03§,♯,^	NR/NR	NR/NR
MRSE 461	DAP10	1.41 ± 0.20	1.08 ± 0.67	1.41 ± 0.08	NR	NR
	DAP10/CLA	1.02 ± 0.56	1.49 ± 0.57	1.22 ± 0.67	NR/NA	NR/NA
	DAP10/RIF	4.69 ± 0.28d,♯,^§	3.80 ± 0.25d,♯,^	4.47 ± 0.24d,♯,^,§	NR/>32	NR/>32
	VAN	1.37 ± 0.07	1.44 ± 0.11	1.29 ± 0.18	NR	NR
	VAN/CLA	1.64 ± 0.13	3.17 ± 0.29♯	1.82 ± 0.28	NR/NA	NR/NA
	VAN/RIF	3.33 ± 0.89♯,§	3.20 ± 1.24d,♯	3.82 ± 0.75d,♯,^§	NR/>32	NR/>32

BMD broth microdilution, CLA clarithromycin, DAP daptomycin, hVISA heteroresistant vancomycin-intermediate S. aureus, MIC minimum inhibitory concentrations, MRSA methicillin-resistant Staphylococcus aureus, MRSE methicillin-resistant Staphylococcus epidermidis, RIF rifampin, ST steel, T 0 continuous flow, TE Teflon, TT titanium, VAN vancomycin

♯ P < 0.05 compared to T 72 growth control (log10 CFU/cm2)

^ Therapeutic enhancement

§ P < 0.05 compared to related monotherapy regimen

aRecovered embedded biofilm nonsusceptible mutants from screening plates; performed via BMD

bNR no mutants recovered from drug screening plates

cNA no applicable; cells already resistant therefore further MICs not appropriate

d T 72 mutant recovered with this material

All strains produced biofilm. MRSA 5266 biofilm production was similar to the low biofilm control strain 12228, while hVISA 3640 produced 50% more than control strain 12228 and 40% more than MRSA 5266. The CoNS strain (MRSA 461) produced the highest amounts of biofilm with 75 and 50% higher biofilm production compared to 5266 and 3640, respectively, and quantification most comparable to the medium producing control strain 35556.

The in vitro PK/PD model activities of antimicrobials are displayed in Table 2 and Fig. 1. Table 3 summarizes the observed PK parameters of simulated regimens.

Table 3

Pharmacokinetic parameters of antimicrobials achieved in the PK/PD model

Drug, dosage	fC max (mg/L) (target value)	Half-life (h) (target value)	fAUC0–24 (mg h/L)
Daptomycin 10 mg/kg/day	10.82 ± 0.53 (11.3)	8.64 ± 0.1 (8)	123.1 ± 5.1
Daptomycin 12 mg/kg/day	14.22 ± 0.12 (14.7)	8.37 ± 0.46 (8)	158.3 ± 5.0
Vancomycin 2 g q12h	36.6 ± 1.8 (30)	6.19 ± 0.42 (6)	353.7 ± 4.1
Rifampin 600 mg daily	4.35 ± 0.24 (3.5)	2.24 ± 0.51 (3)	6.44 ± 0.02
Rifampin 450 mg q12h	4.06 ± 0.16 (2.9)	2.88 ± 0.12 (3)	18.07 ± 3.21
Clarithromycin 250 mg q12ha	1.51 ± 0.25 (1)	2.6 ± 1.4 (3.5)	4.2 ± 1.8

Results are expressed as means ± standard deviations

fC max maximum free drug concentration, fAUC 0–24 free area under the concentration–time curve from 0 to 24 h, PK/PD pharmacokinetics/pharmacodynamics

aq12h, every 12 h

Against MRSA 5266 and MRSE 461 (Fig. 1a, b), only DAP combined with RIF demonstrated therapeutic enhancement, even reaching bactericidal activity and exceeding 4 log10 CFU/cm2 kill (range 4.13–4.38) when using TT, TE and ST. Reduction in the colony counts from baseline (T 0) to 72 h were significantly greater on TT and ST coupons from baseline (T 0) to 72 h (Δ0 to 72, P ≤ 0.032, P ≤ 0.024, respectively) than all other regimens (Fig. 1; Table 2). These reductions were visible on SEM for MRSE 461 displaying fewer cells on TE coupons after therapy with DAP and RIF at 72 h (Fig. 2a). Although the combination of VAN + RIF did not display significant enhancement against MRSA 5266 versus VAN alone, a >3 log10 CFU/cm2 reduction (range 3.2–3.82) was noted for this combination against MRSE 461 for TT, TE and ST (P ≤ 0.044). Regrowth at 48 h was correlated with the emergence of resistance to RIF (RIF MIC >32 mg/L) for DAP-containing regimen against MRSE 461. Resistance to RIF was noted in the VAN + RIF for 5266, however, it was not correlated with regrowth. Against platonic bacteria (PB) of both MRSE 461 and MRSA 5266, DAP alone or combined with CLA or RIF, and VAN displayed bactericidal activity, however, only the combinations with RIF had sustained activity over 72 h (data not shown). The addition of CLA to VAN or DAP did not improve killing activity compared to either agent alone against PB (data not shown) or EB of MRSA 5266.

Fig. 1

Activity of DAP and VAN alone and in combination against MRSA 5266 (a), MRSE 461 (b), and hVISA 3640 (c). Error bars denote SD. No significant difference was observed between kill curves obtained on TT, TE and ST coupons, kill curves were combined into 1 graph for clarity purposes. Solid line and filled circle GC, dash-dot line and open circle DAP10, long dash line and inverse open triangle DAP12, dotted line and open triangle DAP + CLA, short dash line and filled square DAP + RIF, dash-dot line and open square DAP + RIF450, solid line and inverse filled triangle VAN, solid line and opened diamond VAN + CLA, long dash and filled triangle VAN + RIF, solid line and opened triangle VAN + RIF450. CLA clarithromycin, DAP daptomycin, hVISA heteroresistant vancomycin-intermediate S. aureus, MRSA methicillin-resistant Staphylococcus aureus, MRSE methicillin-resistant Staphylococcus epidermidis, RIF rifampin, SD standard deviation, ST steel, TE Teflon, TT titanium, VAN vancomycin

Fig. 2

MRSE 461 embedded biofilm a Teflon coupon prior to antibiotic exposure; b after 72 h of DAP + RIF exposure. SEM images are at 1000× magnification. DAP daptomycin, MRSE methicillin-resistant Staphylococcus epidermidis, RIF rifampin, SEM scanning electron microscopy

Against hVISA 3640 (Fig. 1c), treatment with DAP10 plus RIF 600 mg daily resulted in therapeutic enhancement as did treatment of VAN plus RIF 450 mg every 12 h in all materials studied. DAP10 with RIF 600 mg once daily, DAP12 plus RIF 450 mg every 12 h, and VAN combined with RIF 600 mg once daily or 450 mg every 12 h demonstrated similar killing in all materials studied and appeared more efficacious over DAP10, DAP12, and VAN with or without CLA. Although no regimen achieved sustained bactericidal activity, DAP10 combined with RIF 600 mg was bactericidal at 48 h, and despite regrowth had the greatest absolute reduction in colony count achieving 2.96 ± 0.52, 2.95 ± 0.04, and 2.82 ± 0.59 log10 CFU/cm2 for TT, TE and ST EB, and 6.64 ± 1.11 log10 CFU/mL for PB at 72 h, respectively. Against TT coupon EB, DAP10 with RIF 600 mg daily, DAP12 with RIF 450 mg every 12 h and VAN with RIF 450 mg every 12 h displayed significant killing over DAP with CLA (P ≤ 0.040). Against EB grown on TE, the three regimens above demonstrated significantly more reduction in colony counts than DAP12 monotherapy or DAP10 and VAN alone or in combination with CLA (P ≤ 0.016). Reductions in viable EB densities from 0 to 72 h on TE and ST coupons were significantly greater utilizing DAP10 or DAP12 and RIF compared with DAP12, DAP10 or VAN with or without CLA (P ≤ 0.028). VAN combined with RIF 600 mg daily or 450 mg every 12 h displayed significantly more killing in TE and ST EB than DAP10 or DAP12 monotherapy and DAP or VAN with CLA (P ≤ 0.032) for PB and EB cells. Regrowth with DAP10 monotherapy and DAP with the addition of CLA was correlated to the emergence of non-susceptibility at 72 h in EB and PB (Table 2, DAP MIC = 2–8 mg/L, MBIC 8–16 mg/L), however, this was not the case with DAP12 administered alone against EB. Increased MIC to VAN was also observed at 72 h when combined with CLA, with a change in MIC from 1 to 4 mg/L in TE EB.

Discussion

Biofilm infections involving S. aureus and S. epidermidis are associated with poor patient outcomes, increased hospitalization and treatment costs. These infections are difficult to eradicate due to increased organism resistance and decreased antimicrobial penetration. The 2008 UK MRSA prophylaxis and treatment guidelines recommended glycopeptides with or without adjunctive RIF or sodium fusidate as parenteral therapy for MRSA bone and joint infections [34]. Recently, published Infectious Diseases Society of America (IDSA) guidelines recommend VAN as the preferred treatment for oxacillin-resistant staphylococci prosthetic joint infections with DAP or linezolid considered as alternative therapy [27]. However, these guidelines point out the research gap in alternatives to VAN for management of MRSA and CoNS infection [35]. RIF has been previously used in osteomyelitis and implant-related infection models and has demonstrated activity against staphylococcal biofilms [36-38]. Combination therapy with RIF is recommended for RIF-susceptible joint infections associated with biofilm formation, however, monotherapy is discouraged due to the high rate emergence of resistance. When used in combination with DAP, increased killing has been observed as well as a reduction in the emergence of RIF or DAP resistance [6, 27, 36, 39, 40]. However, the guidelines fail to specify which antibiotics are most advantageous to eradicate biofilm infection in combination with RIF. Medical devices are constructed from a variety of biomaterials that include polycarbonate, polyurethane, polystyrene, TE, ST and TT that are widely used in osteoarticular prostheses, fixation devices, pacemakers, prosthetic heart valves and vascular grafts [41, 42]. Therefore, it is important to explore the potential of antibiotics used alone and in combination against organisms that are frequently associated with biofilms affecting these materials.

In the current study, we evaluated the killing activity of DAP and VAN against more difficult to eradicate organisms grown on TT, TE and ST materials. As the results indicate, the addition of RIF to DAP and VAN expedited the elimination of biofilm-embedded organisms. The most potent activity was observed with the combination of DAP and RIF in all three organisms, followed by VAN plus RIF. The most profound effect was seen against MRSA, followed by hVISA and CoNS.

Vancomycin has shown varied efficacy in eradication of biofilm infections [43, 44]. Treatment outcomes may vary based on biofilm production and limited VAN penetration into the biofilm matrix [44]. High-dose DAP alone or in combination with RIF has been shown to have an increased effect and to decrease the emergence of resistance in in vitro and in vivo infection models [7, 11, 38]. We have previously demonstrated sustained bactericidal activity in in vitro models utilizing high-dose DAP in combination with CLA against biofilm-embedded MSSA [11]. DAP with RIF displayed similar bacterial eradication against a highly DAP-susceptible MRSA strain against biofilm-embedded bacteria grown on polycarbonate and also prevented the emergence of resistance [11]. DAP non-susceptibility has been associated with medical device infections, specifically the monotherapy dose of 6 mg/kg/day has been less effective in eradicating adherent organisms [38, 39, 45]. In the current experiment, increasing the dose to 12 mg/kg daily of DAP prevented emergence of non-susceptible mutants in the hVISA strain, therefore, increased dosages may be necessary to eradicate organisms recovered from biofilm and prevent further resistance from occurring.

The relatively high rate of emergence of resistance to RIF is consistent with prior data [11, 27, 28, 37]. The mechanism of resistance is not well understood, however, rpoB gene mutations and efflux mechanisms are thought to contribute [46]. Development of RIF resistance has previously been observed when used as monotherapy in a catheter-lock model [7]. DAP has been shown to reverse RIF resistance in VAN-resistant Enterococcus faecium. The mechanism is thought to be through potentiating RIF binding to RNA polymerase by increased permeabilization of the outer membrane [46, 47]. In MRSA implant infection models, a reduced incidence of RIF resistance has been found in the presence of DAP [48]. Of note, the addition of RIF prevented development of non-susceptibility to DAP in all isolates evaluated in our study. This finding is consistent with other foreign-body infection models, as well as in vivo in humans where DAP mutants have been recovered with DAP monotherapy, but the addition of RIF prevented emergence of DAP and VAN resistance in MRSA [36, 38]. Interestingly, MRSE displayed a higher proclivity toward development of RIF resistance compared to the hVISA and MRSA isolates, although DAP non-susceptibility was more common in the latter two organisms.

The decreased killing potential of combination therapy against CoNS may be explained by the copious amount of biofilm production as demonstrated by biofilm quantification experiments. There was a trend toward increased killing with the TE material in the hVISA and MRSA organisms, but interestingly not with the CoNS. This may be explained by the amount of biofilm present as well as the varying complexity of the biofilm matrices associated with different biomaterials [49]. One such study demonstrated a higher biofilm forming potential with steel pipes compared to those of polyethylene [49]. To see if an increase in DAP and RIF exposure could further improve killing, therefore, we performed additional model experiments utilizing DAP 12 mg/kg daily with RIF 450 mg every 12 h (RIF dose as recommended by Zimmerli et al.) against the hVISA 3640 strain [26]. However, the increase in DAP and RIF exposure did not appear to improve the overall reduction in viable CFU/cm2 counts.

Previous studies including experiments that we have conducted have shown enhanced killing with the addition of CLA; the mechanism is thought to be through glycocalyx inhibition independent of antimicrobial killing [11, 13, 14, 50]. Even in strains with diminished susceptibility, CLA has been shown to eradicate the polysaccharide glycocalyx matrix surrounding MRSA and S. epidermidis bacterial colonies, subsequently decreasing biofilm formation and increasing drug penetration [11, 13, 14]. However, these past experiments primarily utilized time-kill methodologies, a single type of material, supratherapeutic CLA concentrations or organisms with lower DAP MICs. This may partially explain the lack of enhanced killing observed with CLA in our present experiments. Of interest, there is also evidence of CLA promoting glycocalyx production in Pseudomonas aeruginosa biofilms when administered at sub-MIC concentrations [51]. Our model simulated bloodstream CLA PKs, and therefore may not fully represent CLA activity due to its high volume of distribution into tissues. Further studies evaluating the role of CLA as a potential agent for combination therapy against biofilm-embedded organisms are warranted.

Strengths of our study include examining more difficult-to-treat organisms such as hVISA and S. epidermidis with higher MICs to DAP than those previously evaluated. Three separate materials (TT, TE and TE) were run simultaneously in the same model, which may control for variables such as testing different materials on different days. Our in vitro biofilm reactor model is unique in that it has been modified to simulate human PKs. Potential limitations in this study included the use of a limited amount of strains and, therefore, the results may not be representative of all staphylococci with varying susceptibility patterns to VAN or DAP. In addition, the use of different materials (TT, TE and ST) within the same biofilm model may have influenced the type of biofilm formation we observed and therefore our results. Another potential limitation was that the drug exposures were carried out over 72 h. Longer antimicrobial exposures may be needed to improve penetration into biofilm, improve killing and suppress the emergence of resistance.

In conclusion, the combination of DAP with RIF demonstrated the most effective killing against these three staphylococci isolates in a model of embedded biofilm, followed by VAN in combination with RIF. Further studies evaluating different antimicrobial combinations, additional staphylococci isolates with varying susceptibility patterns and longer durations of antibiotic exposure are warranted.

Below is the link to the electronic supplementary material.

Supplementary material 1 (PDF 214 kb)