Literature DB >> 24973906

Correlation between in vivo stresses and oxidation of UHMWPE in total hip arthroplasty.

M Regis1, P Bracco, L Giorgini, S Fusi, P Dalla Pria, L Costa, C Schmid.   

Abstract

The possibility of in vivo, stress-induced oxidation in orthopaedic UHMWPE has been investigated. EtO sterilised, uncrosslinked UHMWPE liners, explanted or shelf-aged, have been collected. Linear wear and wear rate were assessed and FTIR spectroscopy was employed to detect oxidation and to build up oxidation products spatial maps across the liners section. Oxidation profiles have been compared to stress distribution profiles, resulting from a FE analysis conducted on the same liners geometries and couplings. It was found that oxidised and stressed areas followed the same asymmetrical, localized distribution profile. It was therefore possible to establish a correlation between stressed areas and observed oxidation.

Entities:  

Mesh:

Substances:

Year:  2014        PMID: 24973906     DOI: 10.1007/s10856-014-5254-9

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  24 in total

1.  Osteolysis in alloarthroplasty of the hip. The role of ultra-high molecular weight polyethylene wear particles.

Authors:  H G Willert; H Bertram; G H Buchhorn
Journal:  Clin Orthop Relat Res       Date:  1990-09       Impact factor: 4.176

2.  Wear resistance and mechanical properties of highly cross-linked, ultrahigh-molecular weight polyethylene doped with vitamin E.

Authors:  Ebru Oral; Steven D Christensen; Arnaz S Malhi; Keith K Wannomae; Orhun K Muratoglu
Journal:  J Arthroplasty       Date:  2006-06       Impact factor: 4.757

3.  In vivo oxidation contributes to delamination but not pitting in polyethylene components for total knee arthroplasty.

Authors:  Francisco J Medel; Steven M Kurtz; Javad Parvizi; Gregg R Klein; Matthew J Kraay; Clare M Rimnac
Journal:  J Arthroplasty       Date:  2010-09-28       Impact factor: 4.757

4.  The influence of head diameter and wall thickness on deformations of metallic acetabular press-fit cups and UHMWPE liners: a finite element analysis.

Authors:  Paul Goebel; Daniel Kluess; Jan Wieding; Robert Souffrant; Horst Heyer; Manuela Sander; Rainer Bader
Journal:  J Orthop Sci       Date:  2013-02-03       Impact factor: 1.601

5.  Hip contact forces and gait patterns from routine activities.

Authors:  G Bergmann; G Deuretzbacher; M Heller; F Graichen; A Rohlmann; J Strauss; G N Duda
Journal:  J Biomech       Date:  2001-07       Impact factor: 2.712

6.  In vivo oxidation and surface damage in retrieved ethylene oxide-sterilized total knee arthroplasties.

Authors:  Daniel MacDonald; Josa Hanzlik; Peter Sharkey; Javad Parvizi; Steven M Kurtz
Journal:  Clin Orthop Relat Res       Date:  2012-07       Impact factor: 4.176

7.  An augmented hybrid constitutive model for simulation of unloading and cyclic loading behavior of conventional and highly crosslinked UHMWPE.

Authors:  J S Bergström; C M Rimnac; S M Kurtz
Journal:  Biomaterials       Date:  2004-05       Impact factor: 12.479

8.  Future young patient demand for primary and revision joint replacement: national projections from 2010 to 2030.

Authors:  Steven M Kurtz; Edmund Lau; Kevin Ong; Ke Zhao; Michael Kelly; Kevin J Bozic
Journal:  Clin Orthop Relat Res       Date:  2009-04-10       Impact factor: 4.176

9.  In vivo UHMWPE biodegradation of retrieved prosthesis.

Authors:  L Costa; M P Luda; L Trossarelli; E M Brach del Prever; M Crova; P Gallinaro
Journal:  Biomaterials       Date:  1998-08       Impact factor: 12.479

10.  Oxidation in orthopaedic UHMWPE sterilized by gamma-radiation and ethylene oxide.

Authors:  L Costa; M P Luda; L Trossarelli; E M Brach del Prever; M Crova; P Gallinaro
Journal:  Biomaterials       Date:  1998 Apr-May       Impact factor: 12.479

View more
  5 in total

1.  Does cyclic stress play a role in highly crosslinked polyethylene oxidation?

Authors:  Francisco Medel; Steven Kurtz; Daniel MacDonald; Francisco Javier Pascual; José Antonio Puértolas
Journal:  Clin Orthop Relat Res       Date:  2015-03       Impact factor: 4.176

Review 2.  Current Knowledge on Biomaterials for Orthopedic Applications Modified to Reduce Bacterial Adhesive Ability.

Authors:  Valeria Allizond; Sara Comini; Anna Maria Cuffini; Giuliana Banche
Journal:  Antibiotics (Basel)       Date:  2022-04-15

Review 3.  Ultra-High Molecular Weight Polyethylene: Influence of the Chemical, Physical and Mechanical Properties on the Wear Behavior. A Review.

Authors:  Pierangiola Bracco; Anuj Bellare; Alessandro Bistolfi; Saverio Affatato
Journal:  Materials (Basel)       Date:  2017-07-13       Impact factor: 3.623

4.  Influence of conformity on the wear of total knee replacement: An experimental study.

Authors:  Claire L Brockett; Silvia Carbone; John Fisher; Louise M Jennings
Journal:  Proc Inst Mech Eng H       Date:  2017-12-17       Impact factor: 1.617

Review 5.  Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) as a Promising Polymer Material for Biomedical Applications: A Concise Review.

Authors:  Muzamil Hussain; Rizwan Ali Naqvi; Naseem Abbas; Shahzad Masood Khan; Saad Nawaz; Arif Hussain; Nida Zahra; Muhammad Waqas Khalid
Journal:  Polymers (Basel)       Date:  2020-02-04       Impact factor: 4.329

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.