Xing Zhang1, Jie Yuan1, Sidan Du1, Oliver D Kripfgans2, Xueding Wang2, Paul L Carson2, Xiaojun Liu3. 1. School of Electronic Science and Engineering, Nanjing University, Nanjing, 210093, China. 2. Department of Radiology, University of Michigan, Ann Arbor, Michigan 48109. 3. School of Physics, Nanjing University, Nanjing 210093, China.
Abstract
PURPOSE: Digital breast tomosynthesis (DBT) offers poor image quality along the depth direction. This paper presents a new method that improves the image quality of DBT considerably through the a priori information from automated ultrasound (AUS) images. METHODS: DBT and AUS images of a complex breast-mimicking phantom are acquired by a DBT/AUS dual-modality system. The AUS images are taken in the same geometry as the DBT images and the gradient information of the in-slice AUS images is adopted into the new loss functional during the DBT reconstruction process. The additional data allow for new iterative equations through solving the optimization problem utilizing the gradient descent method. Both visual comparison and quantitative analysis are employed to evaluate the improvement on DBT images. Normalized line profiles of lesions are obtained to compare the edges of the DBT and AUS-corrected DBT images. Additionally, image quality metrics such as signal difference to noise ratio (SDNR) and artifact spread function (ASF) are calculated to quantify the effectiveness of the proposed method. RESULTS: In traditional DBT image reconstructions, serious artifacts can be found along the depth direction (Z direction), resulting in the blurring of lesion edges in the off-focus planes parallel to the detector. However, by applying the proposed method, the quality of the reconstructed DBT images is greatly improved. Visually, the AUS-corrected DBT images have much clearer borders in both in-focus and off-focus planes, fewer Z direction artifacts and reduced overlapping effect compared to the conventional DBT images. Quantitatively, the corrected DBT images have better ASF, indicating a great reduction in Z direction artifacts as well as better Z resolution. The sharper line profiles along the Y direction show enhancement on the edges. Besides, noise is also reduced, evidenced by the obviously improved SDNR values. CONCLUSIONS: The proposed method provides great improvement on the quality of DBT images. This improvement makes it easier to locate and to distinguish a lesion, which may help improve the accuracy of the diagnosis using DBT imaging.
PURPOSE: Digital breast tomosynthesis (DBT) offers poor image quality along the depth direction. This paper presents a new method that improves the image quality of DBT considerably through the a priori information from automated ultrasound (AUS) images. METHODS: DBT and AUS images of a complex breast-mimicking phantom are acquired by a DBT/AUS dual-modality system. The AUS images are taken in the same geometry as the DBT images and the gradient information of the in-slice AUS images is adopted into the new loss functional during the DBT reconstruction process. The additional data allow for new iterative equations through solving the optimization problem utilizing the gradient descent method. Both visual comparison and quantitative analysis are employed to evaluate the improvement on DBT images. Normalized line profiles of lesions are obtained to compare the edges of the DBT and AUS-corrected DBT images. Additionally, image quality metrics such as signal difference to noise ratio (SDNR) and artifact spread function (ASF) are calculated to quantify the effectiveness of the proposed method. RESULTS: In traditional DBT image reconstructions, serious artifacts can be found along the depth direction (Z direction), resulting in the blurring of lesion edges in the off-focus planes parallel to the detector. However, by applying the proposed method, the quality of the reconstructed DBT images is greatly improved. Visually, the AUS-corrected DBT images have much clearer borders in both in-focus and off-focus planes, fewer Z direction artifacts and reduced overlapping effect compared to the conventional DBT images. Quantitatively, the corrected DBT images have better ASF, indicating a great reduction in Z direction artifacts as well as better Z resolution. The sharper line profiles along the Y direction show enhancement on the edges. Besides, noise is also reduced, evidenced by the obviously improved SDNR values. CONCLUSIONS: The proposed method provides great improvement on the quality of DBT images. This improvement makes it easier to locate and to distinguish a lesion, which may help improve the accuracy of the diagnosis using DBT imaging.
Authors: A Korn; M Fenchel; B Bender; S Danz; T K Hauser; D Ketelsen; T Flohr; C D Claussen; M Heuschmid; U Ernemann; H Brodoefel Journal: AJNR Am J Neuroradiol Date: 2011-10-27 Impact factor: 3.825
Authors: Mitra Noroozian; Lubomir Hadjiiski; Sahand Rahnama-Moghadam; Katherine A Klein; Deborah O Jeffries; Renee W Pinsky; Heang-Ping Chan; Paul L Carson; Mark A Helvie; Marilyn A Roubidoux Journal: Radiology Date: 2011-10-13 Impact factor: 11.105
Authors: David Gur; Gordon S Abrams; Denise M Chough; Marie A Ganott; Christiane M Hakim; Ronald L Perrin; Grace Y Rathfon; Jules H Sumkin; Margarita L Zuley; Andriy I Bandos Journal: AJR Am J Roentgenol Date: 2009-08 Impact factor: 3.959
Authors: Ganesh Narayanasamy; Gerald L LeCarpentier; Marilyn Roubidoux; J Brian Fowlkes; Anne F Schott; Paul L Carson Journal: Med Phys Date: 2009-09 Impact factor: 4.071
Authors: Monika Nothacker; Volker Duda; Markus Hahn; Mathias Warm; Friedrich Degenhardt; Helmut Madjar; Susanne Weinbrenner; Ute-Susann Albert Journal: BMC Cancer Date: 2009-09-20 Impact factor: 4.430