Synthesis and antifungal activity of benzamidine derivatives carrying 1,2,3-triazole moieties.

Eighteen novel benzamidine derivatives containing 1,2,3-triazole moieties were synthesized. The in vitro and in vivo fungicidal acitivities of the title compounds and the arylamidine intermediates against Colletotrichum lagenarium and Botrytis cinerea were tested. The synthesized benzamidines exhibited weak antifungal activities in vitro against the tested fungi, but some of the compounds showed excellent activities in vivo to the same strains. Among the compounds tested, 9b showed 79% efficacy in vivo against C. lagenarium at a concentration of 200 μg/mL, and the efficacy of compound 16d (90%) toward the same strain was even superior than that of the commercial fungicide carbendazim (85%).

1. Introduction

The majority of agricultural phytopathogens, especially Botrytis cinerea, the causal agent of the common disease gray mold on vegetable and fruit crops, have developed resistance to the most commonly used fungicides all over the world [1]. Application of synthetic fungicides is still the most efficient tool to control crop diseases. This situation urged us to find new compounds having agricultural antifungal activities. Amidine derivatives exhibit several significant bioactivities, such as antitumor [2], trypanocidal [3,4,5], antiprotozoan [6,7], anti-HIV [8], diuretic, anti-inflammatory, analgesic [9], antivirus, fungicidal and bactericidal [10,11,12,13] activities. Amidines can also be used in the synthesis of metallo-organic compounds [14]. Aromatic diamidines has been explored as agents against a widespread range of microorganisms [15]. In our previous works, aromatic diamidines were found to have excellent antifungal activities in agriculture, especially for the treatment of gray mold on tomatoes [16,17]. It was reported that good bioacitivities could be obtained by linking the arylamidino group with heteorocycle moieties [18,19,20].

1,2,3-Triazoles are very important heterocycles showing excellent bioactivities in pharmaceutical and agrochemical applications. Compounds containing 1,2,3-triazoles have been reported for their antifungal [21,22,23], antibacterial [24,25,26,27], anti-HIV [28], insecticidal [29], herbicidal [30], antiviral [31], antitumor [32], tuberculosis inhibitory [33], antiprotozoal [34], antimalarial [35], anticancer [36], and larvicidal [37] activities. The fungicidal activity of the commercial fungicide fluconazole can be improved by introducing a 1,2,3-triazole moiety into the molecule [38,39]. The presence of the 1,2,3-triazole moiety in oxazolidinone compounds can increase the protein binding ability and subsequently improve the antibacterial activities [40]. The compounds formed by linking a 1,2,3-triazole ring and an indole nucleus together possessed much higher antimicrobial activity compared with the precursors [41]. Another advantage of 1,2,3-triazoles is that they can be prepared conveniently by Huisgen’s cycloaddition reaction between azides and terminal alkynes without complicated purification.

In an attempt to find more potent antifungal molecules, a series of new compounds were designed by linking aromatic amidines and 1,2,3-triazoles. In addition, their in vitro and in vivo biological activity toward the strains C. lagenarium and B. cinerea were studied in this paper.

2. Results and Discussion

2.1. Chemistry

Target molecules 4a–e were synthesized according to Scheme 1. 4-(Azidomethyl)benzonitrile (2) was obtained by adding aqueous sodium azide to 4-cyanobenzyl bromide in DMF [42], the reaction took place quantitatively and the product can be separated by simple extraction. The potentially explosive benzyl azide 2 should be handled carefully and the precipitation should be avoided by first adding toluene to the reaction mixture in the end of the reaction. After being dried, 2 can be used as a solution without evaporation of the solvent. Then compound 2 was reacted with propargyl alcohol under standard “click chemistry” [43] conditions using a copper sulfate/sodium ascorbate system as the catalyst. The copper sulfate and sodium ascorbate were dissolved in water before being added to the reaction mixture to ensure a good dispersion of the resultant cuprous salt. The temperature is crucial in this step. Little 2 had been converted and the mixture stayed clear when the reaction mixture being stirred for 48 h at 40 °C. However, plenty of crystals were formed in the flask after being stirred for 6 h at 55 °C when TLC indicated that no 2 remained. The target compound was obtained in high yield by recrystallization. 4-((4-(Hydroxymethyl)-1H-1,2,3-triazol-1-yl) methyl)benzonitrile (3) was converted into 4 by a Pinner reaction [44]. Anhydrous conditions were important in the synthesis of the Pinner salt. Compound 3 was dried under 110 °C before use, and absolute ethanol was adopted as both solvent and reactant. The moisture-sensitive Pinner salt was handled quickly when being filtered and recrystallized in order to reduce byproducts. The Pinner salt was dissolved in absolute ethanol and kept under anhydrous conditions before use to avoid the absorption of moisture. Compounds 4a–e were obtained by the ammonization of the Pinner salt with corresponding amines.

Scheme 1

Synthesis of compounds 4 and 9.

Compounds 9a–e were obtained according to the procedure described in Scheme 1. 4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-benzonitrile (8) was obtained by reacting 1-nitro-2-(prop-2-ynyloxy) benzene (7) with 2 under “click chemistry” conditions. Compound 8 was converted into the corresponding amidines 9 following the same procedure used for 4.

When we applied the method used for the preparation of 4 and 9 in synthesizing 16 and 17, the target products could not be obtained. Compounds 18 and 19 were obtained in high yields by reacting 10 with propargyl alcohol or 12, respectively. However, when treated with hydrogen chloride in anhydrous ethanol, the cyano group on 18 or 19 could not be converted into the corresponding Pinner salt. We surmised that the unreactiveness of the cyano group on the 3-position of the benzene ring may be attributed to the electron donating aminomethyl group at the meta position [45], which decreased the electron density at the position the cyano group is linked to, and made it very difficult for the HCl-catalyzed Pinner reaction [46] to occur. The synthesis strategy was therefore adjusted as shown in Scheme 2. The 3-(azidomethyl)benzonitrile was inverted into the corresponding amidines by a Pinner reaction [42] before the 3-(azidomethyl)-N-benzamidines 15a–e were connected with 1-nitro-4-(prop-2-ynyloxy)benzene (12) or propargyl alcohol using the “click chemistry” method to obtain the target compounds.

Scheme 2

Synthesis of compounds 16 and 17.

The chemical structures of the target compounds (Table 1) were confirmed by their spectral data (1H-NMR, 13C-NMR, ESI-MS, and elementary analysis). The 1H-NMR spectra of compounds 4, 9, 16 and 17 showed a single NH signal from the triazole group at 7.95–8.25 ppm [47,48] and the signal of CH (or CH2) attached to the amidines at 2.97–3.89 ppm [49]. The 13C-NMR spectra of the compounds 4, 9, 15, 16 and 17 showed the signal of C=N in the amidino group at 162–166 ppm [50]. Based on the abovementioned data, it can be concluded that the structures of the amidines were identified correctly.

Table 1

Inhibition activity (%) of the amidines on phytopathogenic fungi a.

Compounds	Inhibition rate (%)
	in vitro (200 μg/mL)		in vivo (300 μg/mL)
	C. lagenarium	B. cinerea	C. lagenarium	B. cinerea
4a	26	23	49	19
4b	19	14	30	60
4c	17	25	60	23
4d	8	0	0	16
4e	10	12	48	56
9a	32	22	57	24
9b	31	30	79	49
9c	61	17	4	13
9d	29	44	17	35
9e	35	14	45	14
15a	12	16	31	43
15b	25	19	61	68
15c	12	24	0	48
15d	10	13	0	46
16a	25	15	19	11
16b	16	8	56	32
16c	10	5	52	47
16d	26	13	90	7
17a	65	36	52	74
17b	21	19	27	0
17c	32	12	45	45
17d	10	17	53	31
Carbendazim	100	100	85	61

a The data are the average of three duplicated results.

2.2. Antifungal Activity Bioassay

The in vitro and in vivo fungicidal activities of the amidines 4a–e, 9a–e, 16a–d, 17a–d and 15a–d are listed in Table 1. Some of the compounds showed valuable in vitro inhibitory activity against C. lagenarium and B. cinerea at a concentration of 200 μg/mL. The test results showed that some of the title compounds and the intermediates 3-(azidomethyl)-N-benzamidine 15a–d possessed fairly potent antifungal activities in vivo to both C. lagenarium and B. cinerea at the concentration of 300 μg/mL. The antifungal activity of those compounds was compared with that of the the commercial fungicide carbendazim at the same concentration. Compounds 9c and 17a exhibited a significant in vitro inhibition effect against C. lagenarium, but the inhibition activities (control efficacy of 61% and 65%) were less than those of the fungicide carbendazim (100%). The analysis above indicated that the variation of the substituent groups on the 1,2,3-triazole ring had a great effect on the antifungal activity against C. lagenarium. The activities of most compounds in the 9 and 17 series having nitrophenoxyl groups on the 1,2,3-triazole ring were higher than those of the 4 and 16 series with hydroxymethyl ones. For example, the activities of compounds 4c and 4d were 17% and 9%, while the activities of 9c and 9d were increased to 61% and 29%. The cyclization of azido groups with propargyl alcohol had no obvious effect on the antifungal activities. However, when propargyl alcohol was replaced with 1-nitro-4-(prop-2-ynyloxy)benzene, the activities were increased significantly. The substituents on the amidino group and the position of the amidino group on the phenyl ring also had significant effects on the antifungal activities, but no rules could be extracted from the activity data. The in vitro activity of the compounds to B. cinerea obeyed the same rule, however, it was not as obvious as the one drawn from the C. lagenarium data. Some of the compounds exhibited significant activities in vivo toward C. lagenarium, in which the compounds 4c, 9a, 9b, 16d and 15b had control efficacy rates of 60%, 57%, 79% and 61%, respectively. It was noteworthy that compound 16d was found to be even more effective than the fungicide carbendazim (control efficacy of 85%). For B. cinerea, many compounds showed excellent in vivo antifungal activities. Compounds 4b, 4e, and 17a and 15b, whose efficacy rates were 60%, 56%, 75%, and 68%, respectively, were found to be much more effective as compared to the fungicide carbendazim SC (54%) against B. cinerea. The different substituents at the 4-position of the triazole ring and amidino group had no obvious relationship with the fungicidal activity against B. cinerea. Most of the compounds exhibited more effective activities in vivo, especially for B. cinerea, than ones in vitro when compared with the commercial fungicide. The aryl amidine moieties played a very crucial role in the antifungal activities.

3. Experimental

3.1. General Information

Melting points were measured on an X-4 melting point apparatus (Beijing Tech. Instrument Co., Beijing, China), and were not corrected. Mass spectra were obtained on a Thermo-Finnigan LCQ-Advantage (ESI) instrument (Thermo Electron Corporation, Waltham, MA, USA); 1H-NMR and 13C-NMR spectra were obtained on Bruker 400 MHz or 500 MHz spectrometers (Bruker Corporation, Billerica, MA, USA) in CDCl3, CDOD3, or (CD3)2SO solution; elemental analysis was performed on an Elemental Vario-III CHN analyzer (Elementar Analysensysteme GmbH, Hanau, Germany). Reagents and solvents were all chemically or analytically pure without further purification if not mentioned. Anhydrous solvents were purified by standard techniques before use. Anhydrous HCl (gas) was prepared by the addition of concentrated hydrochloric acid dropwise to concentrated sulfuric acid and dried by the latter. Reaction progress was monitored by TLC on silica gel F254 plates prepared in the laboratory, and was visualized under UV254 and iodine.

3.2. Synthesis of 4-(Azidomethyl)benzonitrile (2) [42]

4-Cyanobenzyl bromide (1, 45.10 g, 230 mmol) was dissolved in DMF (200 mL) in a flask equipped with a thermometer, and a solution of NaN3 (19.80 g, 300 mmol) in distilled water (100 mL) was added to it in batches under ice bath cooling with stirring, keeping the reaction mixture under 15 °C. The reaction mixture was stirred for 2 more h at ambient temperature after the addition of the sodium azide until TLC indicated no 1 remained. The mixture was transferred to a conical flask and diluted with toluene (200 mL) and distilled water (600 mL). The mixture was separated in a separating funnel and the aqueous phase was extracted with toluene (2 × 70 mL). The organic extracts were combined and washed with brine (70 mL) and water (2 × 70 mL) and dried by MgSO4 overnight. A solution of 2 in toluene (310 mL) was obtained after filtration. After the solvent was evaporated under reduced pressure, 2 was obtained as light yellow oil (35.69 g, 98.2%), 1H-NMR (500 MHz, CDCl3) δ: 7.61 (d, J = 8.2 Hz, 2H, benzene-H), 7.41 (d, J = 7.4 Hz, 2H, benzene-H), 4.42 (s, 2H, CH2). 13C-NMR (125 MHz, CDCl3) δ: 140.97, 132.82, 132.55, 132.55, 129.07, 128.56, 128.56, 128.27, 125.35, 118.55, 111.92, 77.80, 77.55, 77.29, 53.90, 53.90, 21.37.

3.3. Synthesis of 4-((4-(Hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl) Benzonitrile (3)

Compound 2 (35.1 g) was dissolved in a mixture of t-BuOH (300 mL) and distilled water (100 mL), then propargyl alcohol (12.3 g, 230 mmol) was added. The reaction mixture was stirred in a water bath at 60 °C for 48 h after the addition of sodium ascorbate (306 mg, in 3 mL of water) and cupric sulfate (CuSO4·5H2O) (105 mg, in 2 mL of water). The clear reaction mixture turned light yellow. Compound 3 (46.65 g, 128 mmol, 81%) was obtained as white needle-like crystals after filtration and dried under 110 °C for 7 h when most of the solvent was evaporated under vacuum; m.p. 136–137 °C. 1H-NMR (400 MHz, DMSO) δ: 8.09 (s, 1H, triazole-H), 7.86 (d, J = 8.3 Hz, 2H, benzene-H), 7.46 (d, J = 8.3 Hz, 2H, benzene-H), 5.70 (s, 2H, CH2), 5.22 (t, J = 5.6 Hz, 1H, OH), 4.53 (d, J = 5.4 Hz, 2H, CH2). 13C-NMR (100 MHz, DMSO) δ: 148.97, 142.19, 133.19, 129.10, 123.73, 119.04, 111.34, 55.49, 52.53.

3.4. General Procedure for the Synthesis of 4-((4-(Hydroxymethyl)-1H-1,2,3-triazol-1-yl) Methyl)-benzamidines 4a–e

A suspension of 3 (3.0 g, 14.0 mmol) in absolute ethanol (50 mL) was cooled to below 5 °C and saturated with dry HCl gas. Then the mixture was sealed and stirred at ambient temperature for 48 h. White crystalline imino ester was obtained after evaporation of the solvent under anhydrous conditions and washing with dry ether (3 × 15 mL). The resulting imino ester was dissolved in absolute methanol (20 mL). An exothermic reaction took place and the mixture became clear when it was treated with the corresponding amines (60 mmol). Keeping the reaction mixture stirring overnight in sealed flasks resulted in the formation of the corresponding amidines. After evaporation of the solvent in anhydrous conditions, the residue was dissolved in a mixture of ethanol (5 mL) and 2 N aqueous NaOH (5 mL). The target product was precipitated by the addition of ether (40 mL) to the organic phase and then purified by column chromatography on silica gel (CH2Cl2/MeOH = 6:1). Compounds 4a–d were prepared by the same method.

N-Butyl-4-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (4a): Yield, 42.1%; white crystals; m.p. 111–112 °C. 1H-NMR (400 MHz, MeOD) δ: 8.05 (d, J = 12.1 Hz, 1H, triazole-H), 7.75 (d, J = 8.2 Hz, 2H, benzene-H), 7.53 (d, J = 8.2 Hz, 2H, benzene-H), 5.75 (s, 2H, CH2), 5.69 (d, J = 6.0 Hz, 2H, CH2), 3.42 (t, J = 7.3 Hz, 2H, N-CH2), 1.83–1.73 (m, 2H, CH2), 1.05 (t, J = 7.4 Hz, 3H, CH3). 13C-NMR (100 MHz, MeOD) δ: 166.56, 141.31, 129.99, 129.68, 129.16, 128.23, 127.76, 60.92, 54.98, 44.61, 20.73, 10.25. MS (ESI+) m/z: 288 [M+H]+. Anal. Calc. for C15H21N5O·HCl (323.15): C, 55.64; H, 6.85; N, 21.63; found: C, 55.11; H, 6.62; N, 21.56.

N-Sec-butyl-4-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (4b): Yield, 47.4%; white crystals; m.p. 118–120 °C. 1H-NMR (400 MHz, MeOD) δ: 8.02 (s, 1H, triazole-H), 7.71 (d, J = 8.2 Hz, 2H), 7.52 (d, J = 8.2 Hz, 2H, benzene-H), 5.72 (s, 2H, CH2), 4.65 (s, 2H, CH2), 3.81 (dd, J = 13.2, 6.6 Hz, 1H, CH), 3.28 (m, 2H, N-CH2), 1.62–1.48 (m, 3H, CH3), 1.31 (d, J = 6.5 Hz, 3H, CH3). MS (ESI+) m/z: 288 [M+H]+. Anal. Calc. for C15H21N5O·HCl (323.15): C, 55.64; H, 6.85; N, 21.63; found: C, 55.23; H, 6.71; N, 21.75.

N,N-Diethyl-4-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (4c): Yield, 42.1%; yellow crystals; m.p. > 300 °C. 1H-NMR (500 MHz, DMSO) δ: 8.13 (s, 1H, triazole-H), 8.06 (d, J = 8.3 Hz, 2H, benzene-H), 7.46 (d, J = 8.3 Hz, 2H, benzene-H), 5.71 (s, 2H, CH2), 4.51 (d, J = 5.1 Hz, 2H, CH2), 3.89 (s, 4H, N-CH2). 13C-NMR (125 MHz, DMSO) δ: 164.49, 148.93, 142.23, 129.28, 128.63, 124.19, 123.73, 55.46, 52.57, 45.94. MS (ESI+) m/z: 288 [M+H]+. Anal. Calc. for C15H21N5O·HCl (323.15): C, 55.64; H, 6.85; N, 21.63; found: C, 55.37; H, 6.65; N, 21.73.

N-Cyclohexyl-4-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (4d): Yield, 42.1%; white crystals; m.p. 171–173 °C. 1H-NMR (400 MHz, MeOD) δ: 8.21 (s, 1H, triazole-H), 7.79 (d, J = 8.1, 1.5 Hz, 2H, benzene-H), 7.73 (d, J = 8.3 Hz, 2H, benzene-H), 5.77 (s, 2H, CH2), 5.35 (s, 2H, CH2), 3.82 (d, J = 6.7 Hz, 1H, N-CH), 1.79–1.65 (m, 4H, CH2), 1.65–1.52 (m, 2H, CH2), 1.34 (d, J = 6.5 Hz, 3H, CH2), 1.04 (t, J = 7.3 Hz, 3H, CH2). MS (ESI+) m/z: 314 [M+H]+. Anal. Calc. for C17H23N5O·HCl (349.17): C, 58.36; H, 6.91; N, 20.02; found: C, 57.97; H, 6.85; N, 20.34.

N,N-Dibutyl-4-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (4e): Yield, 42.1%; white crystals; m.p. 111–112 °C. 1H-NMR (400 MHz, MeOD) δ: 7.99 (s, 1H, triazole-H), 7.87–7.82 (m, 2H, benzene-H), 7.47–7.43 (m, 2H, benzene-H), 5.69 (s, 2H, CH2), 5.65 (s, 2H, CH2), 2.81–2.74 (m, 4H, N-CH2), 1.80 (d, J = 7.5 Hz, 4H, CH2), 1.24 (m, 4H, CH2), 0.80 (t, J = 7.3 Hz, 6H, CH3). MS (ESI+) m/z: 344 [M+H]+. Anal. Calc. for C19H29N5O·HCl (379.21): C, 60.06; H, 7.96; N, 18.43; found: C, 59.78; H, 7.81; N, 18.71.

3.5. Synthesis of 1-Nitro-2-(prop-2-ynyloxy) Benzene (7)

2-Nitrophenol (5, 9.10 g, 65 mmol) and K2CO3 (9.0 g, 65 mmol) were dissolved in acetone (60 mL) in a three necked flask equipped with a thermometer. Then a solution of propargyl bromide (16.03 g, 300 mmol) in acetone (30 mL) was added dropwise at ambient temperature in about 15 min while stirring. Then the reaction mixture was heated to reflux for 3 h after being stirred for 30 min when TLC (petroleum ether/ethyl acetate = 6:1) indicated no 5 remained. The mixture was allowed to cool to ambient temperature and the resulting white solid was recrystallized in ethanol, to afford yellowish needle-shaped crystals of 7 (8.11 g, 70%); m.p. 115–116 °C. 1H-NMR (400 MHz, CDCl3) δ: 7.85 (dd, J = 8.1, 1H, benzene-H), 7.64–7.51 (m, 1H, benzene-H), 7.27 (t, J = 8.8 Hz, 1H, benzene-H), 7.10 (t, J = 7.8 Hz, 1H, benzene-H), 4.85 (d, J = 2.4 Hz, 2H, CH2), 2.59 (t, J = 2.4 Hz, 1H CH). 13C-NMR (100 MHz, CDCl3) δ: 150.76, 140.35, 134.02, 125.76, 121.45, 115.49, 77.42, 76.78, 57.20.

3.6. Synthesis of 4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl) Benzonitrile (8)

A solution (260 mL) of 3 prepared from 4-cyanobenzyl bromide (39.20 g, 200 mmol) was added to a 500-mL round bottom flask, followed by the evaporation of the solvent under reduced pressure. 1-Nitro-2-(prop-2-ynyloxy) benzene (7, 35.4 g, 200 mmol) was dissolved in t-BuOH (300 mL). The solution of 7 and distilled water (100 mL) was mixed with the residue of 3 in the flask and followed by the addition of sodium ascorbate (250 mg, 1.26 mmol, in 3 mL of water) and cupric sulfate (CuSO4·5H2O, 85 mg, 0.34 mmol, in 2 mL of water). After stirring at 60 °C for 24 h, the mixture was allowed to cool to room temperature. Compound 8 (58.21 g, 82%) was obtained as a white solid after the evaporation of about half of the solvent, filtration and drying at 110 °C, m.p. 136–138 °C. 1H-NMR (500 MHz, DMSO) δ: 8.36 (s, 1H, triazole-H), 7.86 (m, 2H, benzene-H), 7.67 (t, J = 7.4 Hz, 1H, benzene-H), 7.58 (d, J = 8.4 Hz, 1H, benzene-H), 7.46 (d, J = 8.1 Hz, 2H, benzene-H), 7.15 (t, J = 7.7 Hz, 1H, benzene-H), 5.77 (s, 2H, CH2), 5.38 (s, 2H, CH2). 13C-NMR (125 MHz, DMSO) δ: 151.01, 142.73, 141.86, 140.31, 134.76, 133.21, 129.16, 125.85, 125.40, 121.50, 118.99, 116.21, 111.45, 63.08, 52.70.

3.7. General Procedure for the Synthesis of 4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3 -triazol-1-yl)-methyl)-benzamidines 9a–e

A suspension of 8 (3.55 g, 10 mmol), in absolute ethanol (30 mL) was saturated with anhydrous HCl under water-ice bath cooling; the solution was then stirred at room temperature for 4–5 days. After evaporating most of the solvent, the residue was diluted with dry ether, and the resultant solid obtained by filtration was dissolved in dry methanol. The corresponding amines (40 mmol) were added to the solution and stirred for 24 h under anhydrous conditions. Then amidines 9a–d were treated with the same manner described for compound 4. Compounds 9 were purified by column chromatography on silica gel, using dichloromethane/methanol (7:1, v/v) as the eluent.

4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N-butylbenzamidine (9a): Yield, 51.2%; yellow crystals; m.p. 119–121 °C. 1H-NMR (400 MHz, MeOD) δ: 8.25 (s, 1H, triazole-H), 7.77 (d, J = 8.3 Hz, 1H, benzene-H), 7.75 (d, J = 8.3 Hz, 2H, benzene-H), 7.65–7.60 (m, 1H, benzene-H), 7.60–7.56 (m, 1H, benzene-H), 7.53 (d, J = 8.2 Hz, 2H, benzene-H), 7.11 (t, J = 7.7 Hz, 1H, benzene-H) , 5.77 (s, 2H, CH2), 5.34 (s, 2H, CH2), 3.46 (t, J = 7.2 Hz, 2H, N-CH2), 1.74 (m, 2H, CH2), 1.48 (m, 2H, CH2), 1.01 (t, J = 7.3 Hz, 3H, CH2). 13C-NMR (100 MHz, MeOD) δ: 166.02, 153.22, 143.27, 142.65, 131.41, 130.87, 130.73, 130.68, 130.49, 127.22, 127.06, 123.17, 117.67, 64.74, 55.05, 41.37, 31.38, 21.51, 14.75. MS (ESI+) m/z: 409 [M+H]+. Anal. Calc. for C21H24N6O3·HCl (444.17): C, 56.69; H, 5.66; N, 18.89; found: C, 56.78; H, 5.81; N, 18.81.

4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N-isobutylbenzamidine (9b): Yield, 36.5%; white solid; m.p. 109–110 °C. 1H-NMR (400 MHz, MeOD) δ: 8.22 (s, 1H, triazole-H), 7.79–7.74 (m, 1H, benzene-H), 7.73 (d, J = 8.2 Hz, 2H, benzene-H), 7.60 (t, J = 7.3 Hz, 1H, benzene-H), 7.52 (d, J = 8.2 Hz, 2H, benzene-H), 7.09 (t, J = 7.6 Hz, 1H, benzene-H), 5.75 (s, 2H, CH2), 5.32 (s, 2H, CH2), 3.30–3.22 (d, 2H, N-CH2), 2.06 (m, 1H, CH), 1.02 (d, J = 6.9 Hz, 6H, CH3). 13C-NMR (100 MHz, MeOD) δ: 166.36, 153.23, 143.28, 143.31, 136.12, 131.53, 130.88, 130.72, 130.48, 127.15, 127.06, 123.17, 117.66, 64.76, 55.06, 52.30, 29.43, 21.25. MS (ESI+) m/z: 409 [M+H]+. Anal. Calc. for C21H24N6O3·HCl (444.17): C, 56.69; H, 5.66; N, 18.89; found: C, 56.73; H, 5.71; N, 18.82.

4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N,N-diethylbenzamidine (9c): Yield, 45.2%; white solid; m.p. 135–137 °C. 1H-NMR (400 MHz, MeOD) δ: 8.21 (s, 1H, triazole-H), 7.76–7.73 (m, 1H, benzene-H), 7.71 (d, J = 8.2 Hz, 2H, benzene-H), 7.60 (t, J = 7.3 Hz, 1H, benzene-H), 7.52 (d, J = 8.2 Hz, 2H, benzene-H), 7.45 (d, J = 8.4 Hz, 1H, benzene-H), 7.10 (t, J = 7.6 Hz, 1H, benzene-H), 5.74 (s, 2H, CH2), 5.31 (s, 2H, CH2), 3.09 (q, J = 7.3 Hz, 4H, N-CH2), 1.31 (t, J = 7.3 Hz, 6H, CH3). 13C-NMR (100 MHz, MeOD) δ: 166.33, 153.20, 143.99, 142.71, 136.11, 130.71, 130.52, 130.18, 127.04, 123.18, 117.75, 64.76, 55.23, 44.41, 12.47. MS (ESI+) m/z: 409 [M+H]+. Anal. Calc. for C21H24N6O3·HCl (444.17): C, 56.69; H, 5.66; N, 18.89; found: C, 56.81; H, 5.69; N, 18.78.

4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N-cyclohexylbenzamidine (9d): Yield, 57.0%; white crystals; m.p. 110–113 °C. 1H-NMR (400 MHz, MeOD) δ: 8.17 (s, 1H, triazole-H), 7.77–7.71 (m, 1H, benzene-H), 7.67 (d, J = 8.2 Hz, 2H, benzene-H), 7.60–7.53 (m, 1H, benzene-H), 7.48 (d, J = 8.2 Hz, 2H, benzene-H), 7.42 (d, J = 8.4 Hz, 1H, benzene-H), 7.07 (t, J = 7.6 Hz, 1H, benzene-H), 5.72 (s, 2H, CH2), 5.30 (s, 2H, CH2), 3.70–3.59 (m, 1H, N-CH), 1.51–1.35 (m, 5H, CH2), 1.16 (m, 5H, CH2). 13C-NMR (100 MHz, MeOD) δ: 165.09, 153.26, 145.33, 143.21, 136.09, 131.79, 131.45, 130.63, 130.59, 127.07, 123.18, 117.64, 64.79, 55.07, 52.41, 32.76, 26.62, 26.21. MS (ESI+) m/z: 435 [M+H]+. Anal. Calc. for C19H29N5O·HCl (470.18): C, 58.66; H, 5.78; Cl, 7.53; N, 17.84; found: C, 58.78; H, 5.80; N, 17.91.

4-((4-((2-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N,N-dibutylbenzamidine (9e): Yield, 54.6%; light yellow crystals; m.p. 119–121 °C. 1H-NMR (400 MHz, MeOD) δ: 8.10 (s, 1H, triazole-H), 7.82 (d, J = 8.2 Hz, 2H, benzene-H), 7.77 (m, 1H, benzene-H), 7.57 (t, J = 7.4 Hz, 1H, benzene-H), 7.41 (d, J = 8.5 Hz, 1H, benzene-H), 7.34 (d, J = 8.2 Hz, 2H, benzene-H), 7.08 (t, J = 7.7 Hz, 1H, benzene-H), 5.67 (s, 2H, CH2), 5.32 (s, 2H, CH2), 4.23 (t, J = 6.9 Hz, 4H, N-CH2), 3.59 (m, 4H, CH2), 1.48–1.29 (m, 4H, CH2), 0.97 (t, J = 7.4 Hz, 6H, CH3). 13C-NMR (100 MHz, MeOD) δ:165.09, 153.01, 145.11, 143.44, 135.75, 130.70, 129.83, 129.58, 126.91, 122.98, 117.44, 64.60, 55.01, 52.25, 29.98, 21.43, 19.98. MS (ESI+) m/z: 465 [M+H]+. Anal. Calc. for C19H29N5O·HCl (500.23): C, 59.93; H, 6.64; N, 16.77; found: C, 59. 87; H, 6.73; N, 16.72.

3.8. Synthesis of 1-Nitro-4-(prop-2-ynyloxy)benzene (12) [51]

Compound 12 was prepared following the same procedure used for 7. Yield, 76%; m.p. 118–119 °C; 1H-NMR (400 MHz, CDCl3) δ: 8.22 (d, J = 9.3 Hz, 2H, benzene-H), 7.06 (d, J = 9.3 Hz, 2H, benzene-H), 4.81 (d, J = 2.4 Hz, 2H, CH2), 2.60 (s, 1H, CH). 13C-NMR (100 MHz, CDCl3) δ: 162.35, 125.85, 114.99, 77.42, 77.10, 76.80, 56.31.

3.9. Synthesis of 3-(Azidomethyl)benzonitrile (14)

3-(Bromomethyl)benzonitrile (13, 39.2 g, 200 mmol) was dissolved in DMF (180 mL) in an Erlenmeyer flask equipped with a thermometer, then NaN3 (16.50 g, 250 mmol, in 90 mL of distilled water) was added in portions under water-ice bath cooling while stirring, keeping the mixture under 10 °C. After the addition of the azide, the mixture was stirred for 1.5 h at 30 °C when the color of the reaction mixture turned colorless and TLC indicated no 13 remained. The mixture was diluted with toluene (180 mL) and distilled water (500 mL) in turn. The aqueous phase was extracted with toluene (2 × 60 mL) and the organic phase was combined and dried with MgSO4. After removing of the solvent, 14 (39.6 g, 97%) was obtained as a white solid; m.p. 30–31 °C. 1H-NMR (500 MHz, CDCl3) δ: 7.62–7.57 (m, 2H, benzene-H), 7.57–7.54 (m, 1H, benzene-H), 7.51–7.45 (m, 1H, benzene-H), 4.41 (s, 2H, CH2). 13C-NMR (125 MHz, CDCl3) δ: 137.25, 132.41, 131.80, 131.38, 129.73, 118.49, 112.85, 53.62.

3.10. General Procedure for the Synthesis of 3-(Azidomethyl)benzamidines 15a–d [42]

Absolute ethanol (80 mL) was added to the solution (25 mL) of 14. The mixture was sealed and stirred for 7 days at room temprature after being saturated with anhydrous HCl at ice-water bath. The residue was recrystallized from ether, and then dissolved in absolute methanol (30 mL). The solution was stirred at 30 °C overnight after the corresponding amines (43 mmol) were added. After evaporating most of the solvent, the residue was mixed with ethanol (5 mL) and 2 N aqueous NaOH (5 mL). Ether (50 mL) was added after the aqueous phase being removed, and the target amidines 15a–d was obtained by precipitation.

3-(Azidomethyl)-N-butylbenzamidine (15a): Yield, 75.3%; yellow crystals; m.p. 106–109 °C. 1H-NMR (400 MHz, MeOD) δ: 7.67 (s, 1H, benzene-H), 7.64 (d, J = 3.9 Hz, 2H, benzene-H), 7.57 (t, J = 7.6 Hz, 1H, benzene-H), 4.48 (s, J = 6.3 Hz, 2H, CH2), 3.41 (t, J = 7.3 Hz, 2H, N-CH2), 1.75–1.52 (m, 2H, CH2), 1.50–1.30 (m, 2H, CH2), 0.94 (t, 7.4 Hz, 3H, CH3). 13C-NMR (100 MHz, MeOD) δ: 164.17, 137.64, 132.78, 129.80, 129.48, 127.23, 127.17, 53.38, 46.98, 29.36, 19.75, 12.50. MS (ESI+) m/z: 232 [M+H]+. Anal. Calc. for C12H17N5·HCl (267.13): C, 53.83; H, 6.78; N, 26.16; found: C, 53. 87; H, 6.71; N, 26.18.

N-Sec-butyl-3-(azidomethyl)benzamidine (15b): Yield, 71.2%; yellow crystals; m.p. 108–110 °C. 1H-NMR (400 MHz, DMSO) δ: 9.64 (s, 2H, N-H), 8.07 (s, 1H, benzene-H), 7.98 (d, J = 7.7 Hz, 2H, benzene-H), 7.89 (t, J = 7.7 Hz, 1H, benzene-H), 4.38 (s, 2H, CH2), 3.28 (m, 1H, N-CH), 1.85 (m, 2H, CH2), 1.45 (d, J = 6.6 Hz, 3H, CH3), 1.21 (t, J = 7.4 Hz, 3H, CH3). 13C-NMR (100 MHz, DMSO) δ: 162.39, 136.98, 133.17, 130.16, 129.62, 128.65, 128.53, 53.38, 51.12, 28.59, 19.65, 10.83. MS (ESI+) m/z: 232 [M+H]+. Anal. Calc. for C12H17N5·HCl (267.13): C, 53.83; H, 6.78; N, 26.16; found: C, 53. 85; H, 6.82; N, 26.19.

3-(Azidomethyl)-N-cyclohexylbenzamidine (15c): Yield, 78.0%; white crystals; m.p. 110–111 °C. 1H-NMR (400 MHz, MeOD) δ: 7.77 (s, 1H, benzene-H), 7.59 (d, J = 7.7 Hz, 2H, benzene-H), 7.39 (t, J = 7.7 Hz, 1H, benzene-H), 4.42 (s, 2H, CH2), 2.94–2.79 (m, 1H, N-CH), 1.91 (m, 5H, CH3), 1.80–1.65 (m, 5H, CH3). 13C-NMR (100 MHz, MeOD) δ: 163.08, 137.52, 132.67, 131.37, 130.09, 129.41, 127.31, 127.22, 53.39, 48.28, 31.29, 24.80. MS (ESI+) m/z: 258 [M+H]+. Anal. Calc. for C14H19N5·HCl (293.14): C, 57.23; H, 6.86; Cl, 12.07; N, 23.84; found: C, 57. 35; H, 6.81; N, 26.20.

3-(Azidomethyl)-N,N-diethylbenzamidine (15d): Yield, 55.4%; white crystals; m.p. 99–101 °C. 1H-NMR (400 MHz, DMSO) δ: 9.44 (s, 3H, N-H), 8.10 (s, 1H, benzene-H), 7.93 (d, J = 7.7 Hz, 2H, benzene-H), 7.87 (t, J = 7.7 Hz, 1H, benzene-H), 4.45 (s, 2H, CH2), 2.82–2.75 (m, 4H, N-CH2), 1.16 (t, J = 7.4 Hz, 6H, CH3). MS (ESI+) m/z: 232 [M+H]+. Anal. Calc. for C12H17N5·HCl (267.13): C, 53.83; H, 6.78; N, 26.16; found: C, 53. 86; H, 6.75; N, 26.14.

3.11. General Procedure for the Synthesis of 3-((4-(Hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)-benzamidines 16a–d

Compound 15 (4.5 mmol) and propargyl alcohol (28 mg, 5 mmol) was dissolved in a mixture of t-butanol (30 mL) and distilled water (12 mL), and then, ascorbate sodium(45 mg, 0.23 mmol, in 1 mL water) and CuSO4·5H2O (10 mg, 0.04 mmol, in 1 mL water) were added to the mixture. After stirring at 60 °C for 48 h, half of the solvent was evaporated and the target molecule was obtained by recrystallization from ether (16a) or column chromatography on silica gel (16b, 16c, 16d), using dichloromethane/methanol (5:1, v/v) as the eluent.

N-Butyl-3-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (16a): Yield, 68.8%; light yellow crystals; m.p. 106–109 °C. 1H-NMR (400 MHz, MeOD) δ: 8.07 (s, 1H, triazole-H), 7.80 (s, 1H, benzene-H), 7.66 (d, J = 7.7 Hz, 2H, benzene-H), 7.59 (t, J = 7.7 Hz, 1H, benzene-H), 5.72 (s, 2H, CH2), 4.65 (s, 2H, CH2), 3.46 (t, 2H, N-CH2), 1.79–1.68 (m, 2H, CH2), 1.48 (m, 2H, CH2), 0.99 (m, 3H, CH3). 13C-NMR (100 MHz, DMSO) δ: 163.18, 136.16, 132.01, 129.11, 128.93, 126.94, 126.64, 122.58, 54.22, 51.94, 42.09, 38.35, 18.50, 11.92. MS (ESI+) m/z: 288 [M+H]+. Anal. Calc. for C15H21N5O·HCl (323.15): C, 55.64; H, 6.85; N, 21.63; found: C, 55.41; H, 6.72; N, 21.57.

N-Sec-butyl-3-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (16b): Yield, 71.1%; light yellow crystals; m.p. 108–110 °C. 1H-NMR (400 MHz, MeOD) δ: 8.05 (s, 1H, triazole-H), 7.72 (s, 1H, benzene-H), 7.67 (d, J = 7.7 Hz, 2H, benzene-H), 7.59 (t, J = 7.6 Hz, 1H, benzene-H), 5.71 (s, 2H, CH2), 4.64 (s, 2H, CH2), 3.81 (t, J = 7.4 Hz, 1H, N-H), 1.75–1.64 (m, 2H, CH2), 1.32 (m, 2H, CH2), 1.01 (t, J = 7.4 Hz, 3H, CH3). 13C-NMR (100 MHz, DMSO) δ: 162.68, 136.11, 131.94, 129.40, 128.89, 126.94, 126.63, 122.54, 54.22, 51.92, 50.56, 26.58, 17.26, 16.06. MS (ESI+) m/z: 288 [M+H]+. Anal. Calc. for C15H21N5O·HCl (323.15): C, 55.64; H, 6.85; N, 21.63; found: C, 55.42; H, 6.78; N, 21.71.

N-Cyclohexyl-3-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (16c): Yield, 76.2%; light yellow crystals; m.p. 110–111 °C. 1H-NMR (400 MHz, DMSO) δ: 7.95 (s, 1H, triazole-H), 7.63 (s, 1H, benzene-H), 7.57 (d, J = 7.8 Hz, 2H, benzene-H), 7.49 (t, J = 7.6 Hz, 1H, benzene-H), 5.61 (s, 2H, CH2), 4.55 (s, 2H, CH2), 3.59 (m, 1H, N-H), 1.44–1.29 (m, 5H, CH2), 1.24 (m, 5H, CH2). 13C-NMR (100 MHz, DMSO) δ: 162.12, 136.04, 131.92, 129.39, 128.84, 126.73, 126.55, 122.46, 54.22, 52.34, 51.92, 51.88, 46.20, 30.30, 23.98. MS (ESI+) m/z: 314 [M+H]+. Anal. Calc. for C17H23N5O·HCl (349.17): C, 58.36; H, 6.91; N, 20.02; found: C, 58.47; H, 6.89; N, 20.13.

N,N-Diethyl-3-((4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)methyl)benzamidine (16d): Yield, 70.3%; light yellow crystals; m.p. 99–101 °C. 1H-NMR (400 MHz, MeOD) δ: 8.09 (s, 1H, triazole-H), 7.65 (d, J = 7.4 Hz, 1H, benzene-H), 7.62 (d, J = 8.1 Hz, 1H, benzene-H), 7.55 (m, 2H, benzene-H), 5.74 (s, 2H, CH2), 4.66 (s, 2H, CH2), 3.33–3.27 (m, 4H, N-CH2), 1.37 (t, J = 7.2 Hz, 6H, CH3). 13C-NMR (100 MHz, DMSO) δ: 163.75, 162.39, 136.43, 130.50, 129.51, 129.04, 126.35, 125.91, 54.24, 51.92, 42.31, 11.63. MS (ESI+) m/z: 288 [M+H]+. Anal. Calc. for C15H21N5O·HCl (323.15): C, 55.64; H, 6.85; N, 21.63; found: C, 55.42; H, 6.78; N, 21.71.

3.12. General Procedure for the Synthesis of 3-((4-((4-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl) methyl)benzamidines 17a–d

Compounds 17a–d were prepared using the same procedure as for compounds 16a–d, by replacing the propargyl alcohol with 1-nitro-4-(prop-2-ynyloxy)benzene (12).

3-((4-((4-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N-butylbenzamidine (17a): Yield, 80.1%; light yellow crystals; m.p. 164–166 °C. 1H-NMR (400 MHz, MeOD) δ: 8.29 (s, 1H, triazole-H), 8.13 (s, J = 9.1 Hz, 2H, benzene-H), 7.74 (s, 1H, benzene-H), 7.67 (d, J = 7.1 Hz, 1H, benzene-H), 7.65 (d, J = 7.2 Hz, 1H, benzene-H), 7.61 (s, 1H, benzene-H), 7.11 (d, J = 9.1 Hz, 2H, benzene-H), 5.71 (s, 2H, CH2), 5.24 (s, 2H, CH2), 2.93–2.81 (m, 2H, N-CH2), 1.74–1.63 (m, 2H, CH2), 1.34 (m, 2H, CH2), 0.93 (d, J = 2.3 Hz, 3H, CH3). 13C-NMR (100 MHz, DMSO) δ: 163.11, 162.58, 140.85, 135.89, 132.13, 132.02, 129.12, 129.00, 128.73, 127.04, 126.77, 126.48, 126.40, 124.18, 114.04, 60.80, 52.10, 42.11, 28.56, 18.95, 11.92. MS (ESI+) m/z: 409 [M+H]+. Anal. Calc. for C21H24N6O3·HCl (444.17): C, 56.69; H, 5.66; N, 18.89; found: C, 56.71; H, 5.72; N, 18.84.

3-((4-((4-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N-sec-butylbenzamidine (17b): Yield, 69.6%; yellow solid; m.p. 92–94 °C. 1H-NMR (400 MHz, MeOD) δ: 8.31 (s, 1H, triazole-H), 8.17 (d, J = 9.1 Hz, 2H, benzene-H), 7.76 (s, 1H, benzene-H), 7.68 (d, J = 7.1 Hz, 1H, benzene-H), 7.66 (d, J = 7.2 Hz, 1H, benzene-H), 7.60 (m, 1H, benzene-H), 7.15 (d, J = 9.2 Hz, 2H, benzene-H), 5.75 (s, 2H, CH2), 5.28 (s, 2H, CH2), 3.89–3.75 (m, 1H, N-CH), 1.67 (m, 2H, CH2), 1.27 (d, J = 6.6 Hz, 3H, CH3), 1.02–0.98 (m, 3H, CH3). 13C-NMR (100 MHz, DMSO) δ: 162.64, 162.57, 140.89, 135.89, 132.04, 131.92, 129.43, 128.94, 127.03, 126.77, 126.48, 126.40, 124.08, 113.99, 60.79, 52.05, 50.57, 28.98, 17.25, 8.61. MS (ESI+) m/z: 409 [M+H]+. Anal. Calc. for C21H24N6O3·HCl (444.17): C, 56.69; H, 5.66; N, 18.89; found: C, 56.63; H, 5.61; N, 18.93.

3-((4-((4-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N-cyclohexylbenzamidine (17c): Yield, 71.5%; brown solid; m.p. 101–103 °C. 1H-NMR (400 MHz, MeOD) δ: 8.19 (s, 1H, triazole-H), 8.05 (d, J = 7.8 Hz, 2H, benzene-H), 7.65 (s, 1H, benzene-H), 7.58 (d, J = 7.1 Hz, 1H, benzene-H), 7.56 (d, J = 7.1 Hz, 1H, benzene-H), 7.48 (d, J = 7.8 Hz, 1H, benzene-H), 7.04 (d, J = 7.8 Hz, 2H, benzene-H), 5.63 (s, 2H, CH2), 5.17 (s, 2H, CH2), 3.18 (m, 1H, N-CH), 1.55 (m, 5H, CH2), 1.32 (d, J = 10.0 Hz, 5H, CH2). MS (ESI+) m/z: 435 [M+H]+. Anal. Calc. for C19H29N5O·HCl (470.18): C, 58.66; H, 5.78; Cl, 7.53; N, 17.84; found: C, 58.78; H, 5.82; N, 17.81.

3-((4-((4-Nitrophenoxy)methyl)-1H-1,2,3-triazol-1-yl)methyl)-N,N-diethylbenzamidine (17d): Yield, 68.9%; brown solid; m.p. 159–161 °C. 1H-NMR (400 MHz, MeOD) δ: 8.36 (s, 1H, triazole-H), 8.21 (d, J = 8.9 Hz, 2H, benzene-H), 7.68 (s, 1H, benzene-H), 7.64 (m, 2H, benzene-H), 7.54 (d, J = 7.7 Hz, 1H, benzene-H), 7.20 (d, J = 8.9 Hz, 2H, benzene-H), 5.79 (s, 2H, CH2), 5.32 (s, 2H, CH2), 3.40–3.25 (m, 4H, N-CH2), 1.38 (t, J = 7.2 Hz, 6H, CH3). MS (ESI+) m/z: 409 [M+H]+. Anal. Calc. for C21H24N6O3·HCl (444.17): C, 56.69; H, 5.66; N, 18.89; found: C, 56.72; H, 5.61; N, 19.02.

3.13. Fungicidal Activity Bioassay: Effect of the New Compounds on the Mycelial Growth of C. lagenarium and B. cinerea in Solid Media

The compounds 4a–e, 9a–e, 15a–d, 16a–d, 17a–d were dissolved in ethanol (5,000 μg/mL) and mixed with sterile molten potato dextrose agar (PDA) to obtain final concentrations of 200 μg/mL. The commercial fungicide carbendazim SC (with a 50% composition) was used as the positive control. Fungicidal activities of the compounds against B. cinerea were evaluated in vitro using the method given in [52]. The inhibition rate was calculated according to Equation (1): I where I1 is the inhibition rate, D1 is the average diameter of mycelia in the blank test, and D0 is the average diameter of mycelia in the presence of compounds. The results are given in Table 1.

3.14. Effect on C. lagenarium and B. cinerea Activity on Cucumber Leaves [53]

Fungicidal activity against Colletotrichum lagenarium and Botrytis cinerea was tested on cucumber (Cucumis sarivus L.) seedlings at three leaf stages. The commercial fungicide carbendazim SC (with a 50% composition) was adopted as the positive control. Methanol solutions of the compounds and carbendazim (5,000 μg/mL) were diluted to concentrations at 300 μg/mL with 0.1% PEG400 solution of water to obtain solutions that were spread on the surface of the cucumber leaves. After air drying for 24 h, the upper sides of the leaves were inoculated with 4 mm plugs of C. lagenarium or B. cinerea maintained on PDA. Nine replicates were performed. The inhibition rate was calculated according to Equation (1), and the results are shown in Table 1.

4. Conclusions

Eighteen novel benzamidines with 1,2,3-triazole moieties connected to the benzene ring and four benzamidines containing azide groups were synthesized and characterized. Bioassays showed that the synthesized benzamidine compounds had weak antifungal activities against the tested fungi in vitro, however, the activities in vivo of some compounds to the same strains were excellent. Compounds 4c, 9a, 9b, 16d and 15b exhibited significant activities toward C. lagenarium in vivo. Compounds 4b, 4e, and 17a and 15b showed excellent inhibitory activities toward B. cinerea.