Literature DB >> 23924404

Influence of cone-beam computed tomography image artifacts on the determination of dental arch measurements.

Thiago O Gamba1, Matheus L Oliveira, Isadora L Flores, Adriana D Cruz, Solange M Almeida, Francisco Haiter-Neto, Sérgio L P C Lopes.   

Abstract

OBJECTIVE: To compare dental plaster model (DPM) and cone-beam computed tomography (CBCT) in the measurement of the dental arches, and investigate whether CBCT image artifacts compromise the reliability of such measurements.
MATERIALS AND METHODS: Twenty patients were divided into two groups based on the presence or absence of metallic restorations in the posterior teeth. Both dental arches of the patients were scanned with the CBCT unit i-CAT, and DPMs were obtained. Two examiners obtained eight arch measurements on the CBCT images and DPMs and repeated this procedure 15 days later. The arch measurements of each patient group were compared separately by the Wilcoxon rank sum (Mann-Whitney U) test, with a significance level of 5% (α  =  .05). Intraclass correlation measured the level of intraobserver agreement.
RESULTS: Patients with healthy teeth showed no significant difference between all DPM and CBCT arch measurements (P > .05). Patients with metallic restoration showed significant difference between DPM and CBCT for the majority of the arch measurements (P > .05). The two examiners showed excellent intraobserver agreement for both measuring methods with intraclass correlation coefficient higher than 0.95.
CONCLUSION: CBCT provided the same accuracy as DPM in the measurement of the dental arches, and was negatively influenced by the presence of image artifacts.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23924404      PMCID: PMC8673786          DOI: 10.2319/040313-255.1

Source DB:  PubMed          Journal:  Angle Orthod        ISSN: 0003-3219            Impact factor:   2.079


  17 in total

1.  Accuracy and reliability of cone beam computed tomography of the jaws for comparative forensic identification: a preliminary study.

Authors:  Michael Murphy; Nicholas Drage; Romina Carabott; Catherine Adams
Journal:  J Forensic Sci       Date:  2012-03-05       Impact factor: 1.832

2.  Surface analysis of study models generated from OrthoCAD and cone-beam computed tomography imaging.

Authors:  Kurtis G Lightheart; Jeryl D English; Chung H Kau; Sercan Akyalcin; Harry I Bussa; Kathleen R McGrory; Kevin J McGrory
Journal:  Am J Orthod Dentofacial Orthop       Date:  2012-06       Impact factor: 2.650

3.  Image analysis and superimposition of 3-dimensional cone-beam computed tomography models.

Authors:  Lucia H S Cevidanes; Martin A Styner; William R Proffit
Journal:  Am J Orthod Dentofacial Orthop       Date:  2006-05       Impact factor: 2.650

4.  Digital and plaster models: a comparison of measurements and times.

Authors:  Antonio Gracco; Mauro Buranello; Mauro Cozzani; Giuseppe Siciliani
Journal:  Prog Orthod       Date:  2007       Impact factor: 2.750

5.  A new system for scanning, measuring and analyzing dental casts based on a 3D holographic sensor.

Authors:  M Redlich; T Weinstock; Y Abed; R Schneor; Y Holdstein; A Fischer
Journal:  Orthod Craniofac Res       Date:  2008-05       Impact factor: 1.826

6.  On cone-beam computed tomography artifacts induced by titanium implants.

Authors:  Ralf Kurt Willy Schulze; Dorothea Berndt; Bernd d'Hoedt
Journal:  Clin Oral Implants Res       Date:  2009-10-21       Impact factor: 5.977

7.  Validity, reliability, and reproducibility of linear measurements on digital models obtained from intraoral and cone-beam computed tomography scans of alginate impressions.

Authors:  Matthew G Wiranto; W Petrie Engelbrecht; Heleen E Tutein Nolthenius; W Joerd van der Meer; Yijin Ren
Journal:  Am J Orthod Dentofacial Orthop       Date:  2013-01       Impact factor: 2.650

Review 8.  Linear measurements using virtual study models.

Authors:  Nghe S Luu; Liliya G Nikolcheva; Jean-Marc Retrouvey; Carlos Flores-Mir; Tarek El-Bialy; Jason P Carey; Paul W Major
Journal:  Angle Orthod       Date:  2012-04-24       Impact factor: 2.079

9.  Effect of root canal filling materials on dimensions of cone-beam computed tomography images.

Authors:  Daniel Almeida Decurcio; Mike Reis Bueno; Ana Helena Gonçalves de Alencar; Olavo César Lyra Porto; Bruno Correa Azevedo; Carlos Estrela
Journal:  J Appl Oral Sci       Date:  2012 Mar-Apr       Impact factor: 2.698

10.  Accuracy of linear measurements of galileos cone beam computed tomography in normal and different head positions.

Authors:  Mahnaz Sheikhi; Sajad Ghorbanizadeh; Mehrdad Abdinian; Hossein Goroohi; Hamid Badrian
Journal:  Int J Dent       Date:  2012-07-16
View more
  10 in total

1.  Can mandibular lingual canals be used as a forensic fingerprint?

Authors:  Bassant Mowafey; Elke Van de Casteele; Jilan M Youssef; Ahmed R Zaher; Hany Omar; Constantinus Politis; Reinhilde Jacobs
Journal:  J Forensic Odontostomatol       Date:  2015-12-01

Review 2.  Accuracy and reproducibility of dental measurements on tomographic digital models: a systematic review and meta-analysis.

Authors:  Jamille B Ferreira; Ilana O Christovam; David S Alencar; Andréa F J da Motta; Claudia T Mattos; Adriana Cury-Saramago
Journal:  Dentomaxillofac Radiol       Date:  2017-04-26       Impact factor: 2.419

3.  Evaluation of metal artefact reduction in cone-beam computed tomography images of different dental materials.

Authors:  Polyane Mazucatto Queiroz; Matheus Lima Oliveira; Francisco Carlos Groppo; Francisco Haiter-Neto; Deborah Queiroz Freitas
Journal:  Clin Oral Investig       Date:  2017-05-23       Impact factor: 3.573

4.  Influence of exposure factors on the variability of CBCT voxel values: a phantom study.

Authors:  M L Oliveira; D Q Freitas; G M B Ambrosano; F Haiter-Neto
Journal:  Dentomaxillofac Radiol       Date:  2014-05-28       Impact factor: 2.419

5.  Evaluation of mandibular odontogenic keratocyst and ameloblastoma by panoramic radiograph and computed tomography.

Authors:  Daniel Berretta Moreira Alves; Fabrício Mesquita Tuji; Fábio Abreu Alves; André Caroli Rocha; Alan Roger Dos Santos-Silva; Pablo Agustin Vargas; Márcio Ajudarte Lopes
Journal:  Dentomaxillofac Radiol       Date:  2018-06-05       Impact factor: 2.419

6.  Palatal volume and area assessment on digital casts generated from cone-beam computed tomography scans.

Authors:  Shereef Shahen; Gennaro Carrino; Rossella Carrino; Reham Abdelsalam; Carlos Flores-Mir; Letizia Perillo
Journal:  Angle Orthod       Date:  2018-03-21       Impact factor: 2.079

7.  Comparison of the dimensional and morphological accuracy of three-dimensional digital dental casts digitized using different methods.

Authors:  Jiahui Ye; Shimin Wang; Zixuan Wang; Yunsong Liu; Yuchun Sun; Hongqiang Ye; Yongsheng Zhou
Journal:  Odontology       Date:  2022-09-07       Impact factor: 2.885

8.  The effect of vertical bracket positioning on torque and the resultant stress in the periodontal ligament--a finite element study.

Authors:  Ahmadreza Sardarian; Shahla Momeni Danaei; Shoaleh Shahidi; Sahar Ghodsi Boushehri; Allahyar Geramy
Journal:  Prog Orthod       Date:  2014-08-22       Impact factor: 2.750

9.  Radiographic observers' ability to recognize patient movement during cone beam CT.

Authors:  R Spin-Neto; L H Matzen; L Schropp; G S Liedke; E Gotfredsen; A Wenzel
Journal:  Dentomaxillofac Radiol       Date:  2014-02-26       Impact factor: 2.419

10.  A Comparative Evaluation of Mixed Dentition Analysis on Reliability of Cone Beam Computed Tomography Image Compared to Plaster Model.

Authors:  Snigdha Gowd; T Shankar; Samarendra Dash; Nivedita Sahoo; Suravi Chatterjee; Pritam Mohanty
Journal:  J Int Soc Prev Community Dent       Date:  2017-07-31
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.