Literature DB >> 23715954

One hundred and fifty years of history of the Morse taper: from Stephen A. Morse in 1864 to complications related to modularity in hip arthroplasty.

Philippe Hernigou1, Steffen Queinnec, Charles Henri Flouzat Lachaniette.   

Abstract

Entities:  

Mesh：

Year:  2013        PMID： 23715954      PMCID： PMC3779551          DOI： 10.1007/s00264-013-1927-0

Source DB:  PubMed          Journal:  Int Orthop        ISSN： 0341-2695            Impact factor:   3.075


× No keyword cloud information.
  4 in total

1.  Corrosion between the components of modular femoral hip prostheses.

Authors:  J P Collier; V A Surprenant; R E Jensen; M B Mayor; H P Surprenant
Journal:  J Bone Joint Surg Br       Date:  1992-07

2.  Disassembly of a modular acetabular component of a total hip-replacement arthroplasty. A case report.

Authors:  K J Kitziger; J C DeLee; J A Evans
Journal:  J Bone Joint Surg Am       Date:  1990-04       Impact factor: 5.284

3.  Ceramic prosthetic devices.

Authors:  H Mittelmeier
Journal:  Hip       Date:  1984

4.  [Alumina and its use in surgery of the hip. (Experimental study)].

Authors:  P Boutin
Journal:  Presse Med       Date:  1971-03-20       Impact factor: 1.228
  4 in total
  17 in total

1.  Glenosphere disengagement in a reverse total shoulder arthroplasty with a non-Morse taper design.

Authors:  Corey B Fuller; Stephen F Gregorius; Eric K Lim
Journal:  Int Orthop       Date:  2015-01-21       Impact factor: 3.075

2.  Outcome of a modular tapered uncemented titanium femoral stem in revision hip arthroplasty.

Authors:  Maik Hoberg; Christian Konrads; Jana Engelien; Dorothee Oschmann; Michael Holder; Matthias Walcher; Maximilian Rudert
Journal:  Int Orthop       Date:  2015-02-18       Impact factor: 3.075

3.  Radiological identification of Zweymüller-type femoral stem prosthesis in revision cases.

Authors:  Saverio Affatato; Saverio Comitini; Matteo Fosco; Aldo Toni; Domenico Tigani
Journal:  Int Orthop       Date:  2016-02-29       Impact factor: 3.075

4.  The effect of manufacturing tolerances on the mechanical environment of taper junctions in modular TKR.

Authors:  Kyle Snethen; Jorge Hernandez; Melinda Harman
Journal:  J Mech Behav Biomed Mater       Date:  2019-04-18

Review 5.  [Partial or full component exchange in hip revision? : The relevance of off-label use and mix & match].

Authors:  K P Günther; K Tucker; P Kjaersgaard-Andersen; J Lützner; J P Kretzer; R Nelissen; T Lange; L Zagra
Journal:  Orthopadie (Heidelb)       Date:  2022-06-27

Review 6.  Head-neck taper corrosion in hip arthroplasty.

Authors:  S Hussenbocus; D Kosuge; L B Solomon; D W Howie; R H Oskouei
Journal:  Biomed Res Int       Date:  2015-04-14       Impact factor: 3.411

Review 7.  What every surgeon should know about Ceramic-on-Ceramic bearings in young patients.

Authors:  Philippe Hernigou; François Roubineau; Charlie Bouthors; Charles-Henri Flouzat-Lachaniette
Journal:  EFORT Open Rev       Date:  2017-03-13

8.  Third-generation pure alumina and alumina matrix composites in total hip arthroplasty: What is the evidence?

Authors:  Didier Hannouche; Matthieu Zingg; Hermes Miozzari; Remy Nizard; Anne Lübbeke
Journal:  EFORT Open Rev       Date:  2018-01-10

9.  Atraumatic dissociation of a modular shoulder hemiarthroplasty: a case report and literature review.

Authors:  Marlon M Mencia; Raakesh Goalan; Rondell Skeete
Journal:  JSES Int       Date:  2020-04-08

10.  The Chemical Form of Metal Species Released from Corroded Taper Junctions of Hip Implants: Synchrotron Analysis of Patient Tissue.

Authors:  Anna Di Laura; Paul D Quinn; Vasiliki C Panagiotopoulou; Harry S Hothi; Johann Henckel; Jonathan J Powell; Fitim Berisha; Fernanda Amary; J Fred W Mosselmans; John A Skinner; Alister J Hart
Journal:  Sci Rep       Date:  2017-09-08       Impact factor: 4.379
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.