Literature DB >> 21845398

Effect of the erbium:yttrium-aluminum-garnet laser or diamond bur cavity preparation on the marginal microleakage of class V cavities restored with different adhesives and composite systems.

Batu Can Yaman1, Begum Efes Guray, Can Dorter, Yavuz Gomeç, Oktay Yazıcıoglu, Dina Erdilek.   

Abstract

The aim of this in vitro study was to compare the microleakage of Er:YAG laser and diamond bur on different bonding systems in class V restorations. Class V cavities were prepared with Er:YAG laser or diamond bur on 80 intact human molars. Teeth were randomly distributed into ten groups and cavities were restored with CeramX duo (DENTSPLY) or Filtek Silorane (3M/ESPE) using different bonding materials (One Coat 7.0 (Coltène), XP Bond (DENTSPLY), Clearfil Protect Bond (Kuraray), AdperSE (3M/ESPE), and Silorane System Adhesive (3M/ESPE). All specimens were subjected to thermocycling and load cycling. After being immersed in silver nitrate dye, the specimens were sectioned. Microleakage was evaluated by stereomicroscope and SEM. Data were statistically analyzed by one-way ANOVA, Kruskal-Wallis, and Mann-Whitney tests. Statistically differences were found between groups (p > 0.05) and cavities prepared with the Er:YAG laser showed higher microleakage than diamond bur. The microleakage of different bonding systems was influenced by the choice of diamond bur or Er:YAG laser for class V composite cavity preparation.

Entities:  

Mesh：

Substances：

Year:  2011        PMID： 21845398     DOI： 10.1007/s10103-011-0981-3

Source DB:  PubMed          Journal:  Lasers Med Sci        ISSN： 0268-8921            Impact factor:   3.161


  41 in total

1.  Microtomographic analysis of subsurface enamel and dentine following Er:YAG laser and acid etching.

Authors:  E B Groth; C E Mercer; P Anderson
Journal:  Eur J Prosthodont Restor Dent       Date:  2001-06

2.  Microleakage of a resin sealant after acid-etching, Er:YAG laser irradiation and air-abrasion of pits and fissures.

Authors:  M C Borsatto; S A Corona; R G Dibb; R P Ramos; J D Pécora
Journal:  J Clin Laser Med Surg       Date:  2001-04

3.  SEM evaluation of the interaction pattern between dentin and resin after cavity preparation using ER:YAG laser.

Authors:  Marcelo Thomé Schein; Jorge Sadivar Bocangel; Gesse Eduardo Calvo Nogueira; Patrícia Alessandra Limas Schein
Journal:  J Dent       Date:  2003-02       Impact factor: 4.379

4.  A comparative study of microleakage through enamel and cementum after laser Er:YAG instrumentation in class V cavity obturations, using scanning electron microscopy.

Authors:  José González Bahillo; Manuel Ruiz Piñón; Javier Rodríguez Nogueira; Benjamín Martín Biedma; Purificación Varela Patiño; Fernando Magán Muñoz; Marta Bahillo Varela; Natalia Barciela Castro
Journal:  J Clin Laser Med Surg       Date:  2002-08

5.  Bond strength of self-etching adhesives to dental hard tissues.

Authors:  Christoph Kaaden; John M Powers; Karl-Heinz Friedl; Gottfried Schmalz
Journal:  Clin Oral Investig       Date:  2002-08-09       Impact factor: 3.573

6.  Microleakage of class V cavities with different adhesive systems prepared by a diamond instrument and different parameters of Er:YAG laser irradiation.

Authors:  Nuray Attar; Yonca Korkmaz; Emre Ozel; Ceren Ozge Bicer; Erhan Firatli
Journal:  Photomed Laser Surg       Date:  2008-12       Impact factor: 2.796

7.  Siloranes in dental composites.

Authors:  Wolfgang Weinmann; Christoph Thalacker; Rainer Guggenberger
Journal:  Dent Mater       Date:  2005-01       Impact factor: 5.304

8.  In vitro microleakage of composite restorations prepared by Er:YAG/Er,Cr:YSGG lasers and conventional drills associated with two adhesive systems.

Authors:  Vera Lucia Moldes; Claudia Ines Capp; Ricardo Scarparo Navarro; Adriana Bona Matos; Michel Nicolau Youssef; Alessandra Cassoni
Journal:  J Adhes Dent       Date:  2009-06       Impact factor: 2.359

9.  Nondestructive quantification of leakage at the tooth-composite interface and its correlation with material performance parameters.

Authors:  Jirun Sun; Rui Fang; Nancy Lin; Naomi Eidelman; Sheng Lin-Gibson
Journal:  Biomaterials       Date:  2009-06-09       Impact factor: 12.479

10.  Evaluation of dental composite shrinkage and leakage in extracted teeth using X-ray microcomputed tomography.

Authors:  Diana N Zeiger; Jirun Sun; Gary E Schumacher; Sheng Lin-Gibson
Journal:  Dent Mater       Date:  2009-05-28       Impact factor: 5.304
View more
  10 in total

1.  Evaluation of micromorphological changes in tooth enamel after mechanical and ultrafast laser preparation of surface cavities.

Authors:  Ma Cruz Lorenzo Luengo; M Portillo; J M Sánchez; M Peix; P Moreno; A García; J Montero; A Albaladejo
Journal:  Lasers Med Sci       Date:  2012-07-04       Impact factor: 3.161

2.  Three-year randomized clinical evaluation of a low-shrinkage silorane-based resin composite in non-carious cervical lesions.

Authors:  Batu Can Yaman; Işil Doğruer; Burak Gümüştaş; Begüm Güray Efes
Journal:  Clin Oral Investig       Date:  2013-08-15       Impact factor: 3.573

3.  Comparison of Micro-Leakage from Resin-Modified Glass Ionomer Restorations in Cavities Prepared by Er:YAG (Erbium-Doped Yttrium Aluminum Garnet) Laser and Conventional Method in Primary Teeth.

Authors:  Zahra Bahrololoomi; Forooghosadat Razavi; Ali Asghar Soleymani
Journal:  J Lasers Med Sci       Date:  2014

4.  Effect of Air Abrasion Preconditioning on Microleakage in Class V Restorations Under Cyclic Loading: An In-vitro Study.

Authors:  Umesh Kumar; Charan Kamal Kaur Dharmani; Shamsher Singh; Ajay Logani; Naseem Shah
Journal:  J Clin Diagn Res       Date:  2014-05-15

5.  Effect of Er:YAG laser on enamel demineralization around restorations.

Authors:  Vivian Colucci; Aline Evangelista de Souza Gabriel; Renata Siqueira Scatolin; Mônica Campos Serra; Silmara Aparecida Milori Corona
Journal:  Lasers Med Sci       Date:  2014-02-13       Impact factor: 3.161

6.  Influence of cavity preparation with Er,Cr:YSGG laser and restorative materials on in situ secondary caries development.

Authors:  Ana Carolina Tedesco Jorge; Alessandra Cassoni; Patrícia Moreira de Freitas; André Figueiredo Reis; Aldo Brugnera Junior; Jose Augusto Rodrigues
Journal:  Photomed Laser Surg       Date:  2015-02-05       Impact factor: 2.796

Review 7.  Effect of different types of adhesive systems on the bond strength and marginal integrity of composite restorations in cavities prepared with the erbium laser-a systematic review.

Authors:  Deepti Dua; Ankur Dua; Eugenia Anagnostaki; Riccardo Poli; Steven Parker
Journal:  Lasers Med Sci       Date:  2021-04-22       Impact factor: 3.161

8.  Assessment of Tooth Preparation via Er:YAG Laser and Bur on Microleakage of Dentin Adhesives.

Authors:  Zahra Bahrololoomi; Elham Heydari
Journal:  J Dent (Tehran)       Date:  2014-03-31

9.  The effect of an erbium, chromium: yttrium-scandium-gallium-garnet laser on the microleakage and bond strength of silorane and micro-hybrid composite restorations.

Authors:  Fatih Mehmet Korkmaz; Ozgul Baygin; Tamer Tuzuner; Bora Bagis; Ipek Arslan
Journal:  Eur J Dent       Date:  2013-09

10.  Surface Roughness, Microhardness, and Microleakage of a Silorane-Based Composite Resin after Immediate or Delayed Finishing/Polishing.

Authors:  Fernanda Carvalho Rezende Lins; Raquel Conceição Ferreira; Rodrigo Richard Silveira; Carolina Nemésio Barros Pereira; Allyson Nogueira Moreira; Claudia Silami Magalhães
Journal:  Int J Dent       Date:  2016-02-09
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.