In vitro wear resistance, hardness and elastic modulus of artificial denture teeth.

In this study, the wear resistance, hardness, elastic modulus, and the correlations between them of artificial denture teeth at the sub-enamel layer were examined. Four types of tested artificial denture teeth consisted of 3 conventional acrylic resin teeth (Cosmo HXL, Major Dent, and Yamahachi FX), 1 high cross-linked acrylic resin teeth (Trubyte Bioform IPN), 2 composite resin teeth (SR Orthosit PE, and Yamahachi PX), and 1 porcelain teeth (ACE Teeth). The two-body wear test was performed using a custom made pin on disc apparatus. Volume and weight loss were measured. Hardness and elastic modulus were also assessed by using a nanoindentation system. The results suggested wear resistance varied among the denture tooth materials. Wear resistance of high cross-linked acrylic resin teeth was the lowest. A definite relation between wear resistance and mechanical properties of materials could not be found in this study.