Literature DB >> 19951020

Cervical pedicle screw insertion using a computed tomography cutout technique.

Hiroshi Miyamoto1, Koki Uno.   

Abstract

OBJECT: The pedicle screw has been reported to provide the strongest fixation for the cervical spine, but there is a possibility of malpositioning the screws, which may cause fatal complications such as vertebral artery and neural injuries. Using the conventional freehand technique, between 6.7 and 29% of the screws have been found to be malpositioned. If an accurate entry point and insertion trajectory through the isthmus of the pedicle can be maintained during surgery, safer insertion of the pedicle screw should be achieved. The authors have developed a new pedicle screw insertion method, called the "CT cutout" technique, and report on the technical and clinical aspects of this new technique in terms of accuracy.
METHODS: A total of 130 pedicle screws were inserted from C-2 to T-1 in 29 consecutive patients using the new technique. In the CT cutout technique, a CT slice of every vertebra in which the authors intended to insert pedicle screws was captured from 3D CT images of the cervical spine with the gantry parallel to the pedicle. A life-sized CT image was developed for each level, and the desired insertion line, passing through the middle of the isthmus, was drawn on the image. The images were then cut along the insertion line and the posterior margin of the lamina, and sterilized. During surgery, the proper cephalocaudal entry point was determined using a lateral fluoroscopic image, the CT cutout was placed on the posterior surface of the lamina, and the appropriate entry point and trajectory of pedicle screw insertion were chosen with reference to the CT cutout. The percentage of malpositioned pedicle screws and the deviation between the intended entry point and angle of the pedicle screw, and those that were achieved in practice, was investigated using postoperative CT images.
RESULTS: Three perforations (2.3%) in which more than half a screw diameter was exposed outside the pedicle, and 2 penetrations (1.5%) in which a screw diameter was completely exposed, were identified on the postoperative CT images. All breaches were directed laterally. No neural or vascular injuries were observed. The deviation between the intended entry point and angle of the pedicle screw and the actual values was 0.20 +/- 0.75 mm and 1.46 +/- 4.21 degrees, respectively.
CONCLUSIONS: Several techniques for pedicle screw insertion such as computer-assisted navigation, CT-based navigation, and acquisition of fluoroscopic intraoperative pedicle axis views have been used for improving accuracy. However, there remains a possibility of misplacement, and these costly procedures often require delivery of a high x-ray dose to both patients and surgeons, and/or time-consuming configuration of reference points during surgery. The CT cutout technique is an easy, low-cost procedure that can be performed with the aid of single-plane fluoroscopy and without the need of configuration. This new technique shows great promise for safe pedicle screw insertion for the cervical spine.

Entities:  

Mesh:

Year:  2009        PMID: 19951020     DOI: 10.3171/2009.6.SPINE09352

Source DB:  PubMed          Journal:  J Neurosurg Spine        ISSN: 1547-5646


  14 in total

1.  Cervical pedicle screw insertion using a gutter entry point at the transitional area between the lateral mass and lamina.

Authors:  Katsuhiro Tofuku; Hiroaki Koga; Setsuro Komiya
Journal:  Eur Spine J       Date:  2011-08-10       Impact factor: 3.134

Review 2.  Cervical spondylotic myelopathy: posterior decompression and pedicle screw fixation.

Authors:  Kuniyoshi Abumi
Journal:  Eur Spine J       Date:  2015-03-27       Impact factor: 3.134

3.  Accuracy of lower cervical pedicle screw placement with assistance of distinct navigation systems: a human cadaveric study.

Authors:  Wei Tian; Yajun Liu; Shan Zheng; Yanwei Lv
Journal:  Eur Spine J       Date:  2012-09-18       Impact factor: 3.134

Review 4.  Cervical screw placement using rapid prototyping drill templates for navigation: a literature review.

Authors:  Teng Lu; Chao Liu; Jun Dong; Meng Lu; Haopeng Li; Xijing He
Journal:  Int J Comput Assist Radiol Surg       Date:  2016-05-09       Impact factor: 2.924

5.  Outcomes of surgical intervention for cervical spondylotic myelopathy accompanying local kyphosis (comparison between laminoplasty alone and posterior reconstruction surgery using the screw-rod system).

Authors:  Hiroshi Miyamoto; Koichiro Maeno; Koki Uno; Kenichiro Kakutani; Kotaro Nishida; Masatoshi Sumi
Journal:  Eur Spine J       Date:  2013-08-02       Impact factor: 3.134

6.  Cervical lateral mass screw fixation without fluoroscopic control: analysis of risk factors for complications associated with screw insertion.

Authors:  Shinichi Inoue; Tokuhide Moriyama; Toshiya Tachibana; Fumiaki Okada; Keishi Maruo; Yutaka Horinouchi; Shinichi Yoshiya
Journal:  Arch Orthop Trauma Surg       Date:  2012-03-30       Impact factor: 3.067

7.  Clinical Use of 3D Printing Guide Plate in Posterior Lumbar Pedicle Screw Fixation.

Authors:  Hongliang Chen; Dongying Wu; Huilin Yang; Kaijin Guo
Journal:  Med Sci Monit       Date:  2015-12-18

8.  Surgical safety of cervical pedicle screw placement with computer navigation system.

Authors:  Nobuyuki Shimokawa; Toshihiro Takami
Journal:  Neurosurg Rev       Date:  2016-05-31       Impact factor: 3.042

9.  Accurate and Minimally Invasive Cervical Pedicle Screw Insertion Procedure Using the Bone Biopsy Needle as Drill Guide.

Authors:  Tomoaki Koakutsu; Toshimi Aizawa; Eiji Itoi
Journal:  Spine Surg Relat Res       Date:  2020-02-26

10.  Morphological study of subaxial cervical pedicles by using three-dimensional computed tomography reconstruction image.

Authors:  Kanthika Wasinpongwanich; Permsak Paholpak; Panya Tuamsuk; Winai Sirichativapee; Taweechok Wisanuyotin; Weerachai Kosuwon; Polasak Jeeravipoolvarn
Journal:  Neurol Med Chir (Tokyo)       Date:  2014-08-29       Impact factor: 1.742

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.