Literature DB >> 19397634

A study of the bone healing kinetics of plateau versus screw root design titanium dental implants.

Gary Leonard1, Paulo Coelho, Ioannis Polyzois, Leo Stassen, Noel Claffey.   

Abstract

OBJECTIVE: This study was designed to compare the bone healing process around plateau root from (PRF) and screw root from (SRF) titanium dental implants over the immediate 12 week healing period post implant placement.
MATERIAL AND METHODS: 32PRF and 32SRF implants were placed in 8 beagle dogs at 12, 8, 5 and 3 weeks prior to enthanisation using a bilaterally balanced distribution. Undecalcified ground sections were prepared from the biopsies taken and histometric measurements of bone implant contact (BIC) and bone area fraction occupancy (BAFO) were made on the middle 5 mm portion of each 8 mm implant root length.
RESULTS: The analysis showed that although measurements of bone to implant contact (BIC) and bone area fraction occupancy (BAFO) tended to be greater for the SRF implants at all four time points, the differences in measurements between implant types did not reach statistical significance (P=0.07, P=0.06). The effect of time on BIC and BAFO was found to be strongly significant for both implant types thus indicating a statistically significant increase in BIC and BAFO overall with time (P=0.004, P=0.002). Furthermore, both PRF and SRF implants behaved similarly over time with measurements of BIC and BAFO progressing in parallel. Histomorphologic analysis of these sections demonstrated the prominent role of woven bone (callus) in the bone healing process around PRF implants.
CONCLUSION: The results can be interpreted to indicate a comparable development of secondary stability for both PRF and SRF implant designs. However, as these parameters reflect the structural connection between implant and bone and not the functional properties of the bone to implant interface, they cannot be regarded as comprehensive measures of osseointegration. This particularly relevant given the reduced load bearing capacity of woven bone.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19397634     DOI: 10.1111/j.1600-0501.2008.01640.x

Source DB:  PubMed          Journal:  Clin Oral Implants Res        ISSN: 0905-7161            Impact factor:   5.977


  14 in total

1.  Influence of bone insertion level of the implant on the fracture strength of different connection designs: an in vitro study.

Authors:  Sergio Alexandre Gehrke; Miriam Souza Dos Santos Vianna; Berenice Anina Dedavid
Journal:  Clin Oral Investig       Date:  2013-07-17       Impact factor: 3.573

2.  Effect of Obesity or Metabolic Syndrome and Diabetes on Osseointegration of Dental Implants in a Miniature Swine Model: A Pilot Study.

Authors:  Paulo G Coelho; Benjamin Pippenger; Nick Tovar; Sietse-Jan Koopmans; Natalie M Plana; Dana T Graves; Steve Engebretson; Heleen M M van Beusekom; Paula G F P Oliveira; Michel Dard
Journal:  J Oral Maxillofac Surg       Date:  2018-03-01       Impact factor: 1.895

3.  Osseodensification for enhancement of spinal surgical hardware fixation.

Authors:  Christopher D Lopez; Adham M Alifarag; Andrea Torroni; Nick Tovar; J Rodrigo Diaz-Siso; Lukasz Witek; Eduardo D Rodriguez; Paulo G Coelho
Journal:  J Mech Behav Biomed Mater       Date:  2017-01-13

4.  Effect of decreased implant healing time on bone (re)modeling adjacent to plateaued implants under functional loading in a dog model.

Authors:  Jing Dai; Ning Cheng; Richard J Miron; Bin Shi; Xiangrong Cheng; Yufeng Zhang
Journal:  Clin Oral Investig       Date:  2013-02-03       Impact factor: 3.573

5.  The effect of simplifying dental implant drilling sequence on osseointegration: an experimental study in dogs.

Authors:  Gabriela Giro; Nick Tovar; Charles Marin; Estevam A Bonfante; Ryo Jimbo; Marcelo Suzuki; Malvin N Janal; Paulo G Coelho
Journal:  Int J Biomater       Date:  2013-01-30

6.  Drilling dimension effects in early stages of osseointegration and implant stability in a canine model.

Authors:  Felipe-Eduardo Baires-Campos; Ryo Jimbo; Estevam-Augusto Bonfante; Maiolino-Thomaz Fonseca-Oliveira; Camila Moura; Darceny Zanetta-Barbosa; Paulo-Guilherme Coelho
Journal:  Med Oral Patol Oral Cir Bucal       Date:  2015-07-01

7.  Numerical Method for the Design of Healing Chamber in Additive-Manufactured Dental Implants.

Authors:  Hsiao-Chien Lee; Pei-I Tsai; Chih-Chieh Huang; San-Yuan Chen; Chuen-Guang Chao; Nien-Ti Tsou
Journal:  Biomed Res Int       Date:  2017-02-12       Impact factor: 3.411

8.  Physicochemical Characterization and In Vivo Evaluation of Amorphous and Partially Crystalline Calcium Phosphate Coatings Fabricated on Ti-6Al-4V Implants by the Plasma Spray Method.

Authors:  Estevam A Bonfante; Lukasz Witek; Nick Tovar; Marcelo Suzuki; Charles Marin; Rodrigo Granato; Paulo G Coelho
Journal:  Int J Biomater       Date:  2012-08-27

9.  Plasma treatment maintains surface energy of the implant surface and enhances osseointegration.

Authors:  Fernando P S Guastaldi; Daniel Yoo; Charles Marin; Ryo Jimbo; Nick Tovar; Darceny Zanetta-Barbosa; Paulo G Coelho
Journal:  Int J Biomater       Date:  2013-01-10

10.  The Immediate Aesthetic and Functional Restoration of Maxillary Incisors Compromised by Periodontitis Using Short Implants with Single Crown Restorations: A Minimally Invasive Approach and Five-Year Follow-Up.

Authors:  Mauro Marincola; Giorgio Lombardo; Jacopo Pighi; Giovanni Corrocher; Anna Mascellaro; Jeffrey Lehrberg; Pier Francesco Nocini
Journal:  Case Rep Dent       Date:  2015-11-15
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.