An in vitro comparison of torsional stress and cyclic fatigue resistance of ProFile GT and ProFile GT Series X rotary nickel-titanium files.

The purpose of this in vitro study was to compare the torsional stress and cyclic fatigue characteristics of ProFile GT (Dentsply Tulsa Dental, Tulsa, OK) and ProFile GT Series X (Dentsply Tulsa Dental). Files of 0.04 and 0.06 taper, 25 mm in length, and ISO sizes of 20 and 30 tips were compared (n = 25 per test group). Torque stress resistance was evaluated by measuring the torque in gram-centimeters (g-cm) and angle of deflection (degrees of rotation) required for instrument separation with use of a torsiometer instrument. Cyclic fatigue was determined by recording the time until breakage of a file rotating in a simulated canal with an applied 45 degrees or 60 degrees curve. The files were operated in a cyclic fatigue instrument that simulated clinical rotary file usage with a constant cyclical axial motion. There was no statistical difference (p > 0.05) when comparing the torque (g-cm) required to induce a torsional failure of ProFile GT and ProFile GT Series X files of identical file sizes. The angle of deflection (degrees of rotation) of ProFile GT was significantly greater (p < or = 0.001) before separation than ProFile GT Series X for all file sizes tested except 20/.04 (p > 0.05). There was no statistical difference (p > 0.05) in cyclic fatigue failure for ProFile GT and ProFile GT Series X in a canal with a curvature of 45 degrees . In the 60 degrees canal curvature, ProFile GT was found to be significantly more resistant (p = 0.005) to fracture because of cyclic fatigue than ProFile GT Series X for file size 30/.06 and significant (p < or = 0.001) for files sizes 20/.06 and 30/.04. There was no difference (p > 0.05) in cyclic fatigue resistance in the 60 degrees canal for ProFile GT and ProFile GT Series X for file size 20/.04.