Literature DB >> 17643362

Locations of bone tissue at high risk of initial failure during compressive loading of the human vertebral body.

Senthil K Eswaran1, Atul Gupta, Tony M Keaveny.   

Abstract

Knowledge of the location of initial regions of failure within the vertebra - cortical shell, cortical endplates vs. trabecular bone, as well as anatomic location--may lead to improved understanding of the mechanisms of aging, disease and treatment. The overall objective of this study was to identify the location of the bone tissue at highest risk of initial failure within the vertebral body when subjected to compressive loading. Toward this end, micro-CT-based 60-micron voxel-sized, linearly elastic, finite element models of a cohort of thirteen elderly (age range: 54-87 years, 75+/-9 years) female whole vertebrae without posterior elements were virtually loaded in compression through a simulated disc. All bone tissues within each vertebra having either the maximum or minimum principal strain beyond its 90th percentile were defined as the tissue at highest risk of initial failure within that particular vertebral body. Our results showed that such high-risk tissue first occurred in the trabecular bone and that the largest proportion of the high-risk tissue also occurred in the trabecular bone. The amount of high-risk tissue was significantly greater in and adjacent to the cortical endplates than in the mid-transverse region. The amount of high-risk tissue in the cortical endplates was comparable to or greater than that in the cortical shell regardless of the assumed Poisson's ratio of the simulated disc. Our results provide new insight into the micromechanics of failure of trabecular and cortical bone within the human vertebra, and taken together, suggest that, during strenuous compressive loading of the vertebra, the tissue near and including the endplates is at the highest risk of initial failure.

Entities:  

Mesh:

Year:  2007        PMID: 17643362      PMCID: PMC2082110          DOI: 10.1016/j.bone.2007.05.017

Source DB:  PubMed          Journal:  Bone        ISSN: 1873-2763            Impact factor:   4.398


  34 in total

1.  Classification of vertebral fractures.

Authors:  R Eastell; S L Cedel; H W Wahner; B L Riggs; L J Melton
Journal:  J Bone Miner Res       Date:  1991-03       Impact factor: 6.741

Review 2.  Is the nucleus pulposus a solid or a fluid? Mechanical behaviors of the nucleus pulposus of the human intervertebral disc.

Authors:  J C Iatridis; M Weidenbaum; L A Setton; V C Mow
Journal:  Spine (Phila Pa 1976)       Date:  1996-05-15       Impact factor: 3.468

Review 3.  Properties of acrylic bone cement: state of the art review.

Authors:  G Lewis
Journal:  J Biomed Mater Res       Date:  1997

4.  Direct and computed tomography thickness measurements of the human, lumbar vertebral shell and endplate.

Authors:  M J Silva; C Wang; T M Keaveny; W C Hayes
Journal:  Bone       Date:  1994 Jul-Aug       Impact factor: 4.398

5.  Alterations in the mechanical behavior of the human lumbar nucleus pulposus with degeneration and aging.

Authors:  J C Iatridis; L A Setton; M Weidenbaum; V C Mow
Journal:  J Orthop Res       Date:  1997-03       Impact factor: 3.494

6.  Age changes to the anulus fibrosus in human intervertebral discs.

Authors:  S Bernick; J M Walker; W J Paule
Journal:  Spine (Phila Pa 1976)       Date:  1991-05       Impact factor: 3.468

Review 7.  Vertebral structure and strength in vivo and in vitro.

Authors:  L Mosekilde
Journal:  Calcif Tissue Int       Date:  1993       Impact factor: 4.333

8.  Measurement of strain distributions within vertebral body sections by texture correlation.

Authors:  B K Bay; S A Yerby; R F McLain; E Toh
Journal:  Spine (Phila Pa 1976)       Date:  1999-01-01       Impact factor: 3.468

9.  Contribution of the cortical shell of vertebrae to mechanical behaviour of the lumbar vertebrae with implications for predicting fracture risk.

Authors:  R Andresen; H J Werner; H C Schober
Journal:  Br J Radiol       Date:  1998-07       Impact factor: 3.039

10.  Computed tomography-based finite element analysis predicts failure loads and fracture patterns for vertebral sections.

Authors:  M J Silva; T M Keaveny; W C Hayes
Journal:  J Orthop Res       Date:  1998-05       Impact factor: 3.494

View more
  20 in total

Review 1.  Whole bone mechanics and bone quality.

Authors:  Jacqueline H Cole; Marjolein C H van der Meulen
Journal:  Clin Orthop Relat Res       Date:  2011-08       Impact factor: 4.176

2.  Calibration of the mechanical properties in a finite element model of a lumbar vertebra under dynamic compression up to failure.

Authors:  Anaïs Garo; Pierre Jean Arnoux; Eric Wagnac; Carl Eric Aubin
Journal:  Med Biol Eng Comput       Date:  2011-09-25       Impact factor: 2.602

Review 3.  The broadening spectrum of osteoporotic vertebral fracture.

Authors:  Fergus Eoin McKiernan
Journal:  Skeletal Radiol       Date:  2009-04       Impact factor: 2.199

4.  Role of trabecular microarchitecture in whole-vertebral body biomechanical behavior.

Authors:  Aaron J Fields; Senthil K Eswaran; Michael G Jekir; Tony M Keaveny
Journal:  J Bone Miner Res       Date:  2009-09       Impact factor: 6.741

5.  Effect of specimen-specific anisotropic material properties in quantitative computed tomography-based finite element analysis of the vertebra.

Authors:  Ginu U Unnikrishnan; Glenn D Barest; David B Berry; Amira I Hussein; Elise F Morgan
Journal:  J Biomech Eng       Date:  2013-10-01       Impact factor: 2.097

6.  Mechanisms of initial endplate failure in the human vertebral body.

Authors:  Aaron J Fields; Gideon L Lee; Tony M Keaveny
Journal:  J Biomech       Date:  2010-12-01       Impact factor: 2.712

7.  Micromechanics of the human vertebral body for forward flexion.

Authors:  Haisheng Yang; Shashank Nawathe; Aaron J Fields; Tony M Keaveny
Journal:  J Biomech       Date:  2012-06-16       Impact factor: 2.712

8.  Region-dependent bone loss in the lumbar spine following femoral fracture in mice.

Authors:  Erica V Ely; Benjamin Osipov; Armaun J Emami; Blaine A Christiansen
Journal:  Bone       Date:  2020-07-29       Impact factor: 4.398

9.  Digital tomosynthesis and high resolution computed tomography as clinical tools for vertebral endplate topography measurements: Comparison with microcomputed tomography.

Authors:  Daniel Oravec; Abrar Quazi; Angela Xiao; Ellen Yang; Roger Zauel; Michael J Flynn; Yener N Yeni
Journal:  Bone       Date:  2015-07-26       Impact factor: 4.398

10.  Presence of intervertebral discs alters observed stiffness and failure mechanisms in the vertebra.

Authors:  Amira I Hussein; Zachary D Mason; Elise F Morgan
Journal:  J Biomech       Date:  2013-05-14       Impact factor: 2.712

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.