Biological effects of clinically relevant wear particles from metal-on-metal hip prostheses.

The problems of osteolysis and late aseptic loosening associated with ultra-high molecular weight polyethylene (UHMWPE) particles has lead to a renewed interest in metal-on-metal prostheses. Wear particles generated by modern Co-Cr-on-Co-Cr prostheses are nanometre in size (range: 10-120 nm; mean: about 40 nm), an order of magnitude smaller than the size of UHMWPE known to be critical for activation of osteolytic cytokines by macrophages. Co-Cr wear particles will induce osteolytic cytokine production by human macrophages, but only at high volumetric concentrations. Unlike UHMWPE, Co-Cr particles are not inert. Co-Cr particles have the potential to release metal ions; they may be toxic to cells, induce deoxyribonucleic acid damage or cause host hypersensitivity. The nanometre size range of Co-Cr wear particles means that they may be disseminated widely in the body. The potential for metal-on-metal bearings to induce adverse effects clinically will be dependent upon the rate of wear. What constitutes a safe wear rate for modern metal-on-metal bearings is unknown. However, the wear of metal-on-metal prostheses is critically dependent upon the design and, in particular, the carbon content of the alloy, the radial clearance, and the head diameter. Thus, the potential for adverse biological reactions associated with metal-on-metal bearings can be reduced by selection of appropriately designed implants.